The INSPIRATA Personal Edition Reverb Workstation Software (Upgrade from Lite Edition) from Inspired Acoustics is powerful measurement-based reverberation software that provides unprecedented flexibility in sampled reverbs. This version of the INSPIRATA series supports stereo configurations (no surround matrix) and allows the user to finetune many parameters. Use a maximum of two sound sources, and set the position of the listener in the selected virtual space.

Unlike traditional convolution programs with static spaces, INSPIRATA's computational algorithm is inherently time-variant, simulating the experience of being in a real acoustic space where things in the room including the air are moving slightly. The software provides the truly natural feeling of being in the reverberant space while also delivering consistently dependable audio quality. A wide variety of spaces are supplied in the 140GB library including iconic concert halls, theatres, places of worship, simple and natural domestic spaces, and unique venues for postproduction.

Stereo Computational Reverb    140GB Library of Rooms and Spaces    Concert Halls, Venues, Houses of Worship    Natural and Domestic Spaces    Move Sources and Adjust Parameters    2 Sound Sources Maximum    Sample Rates up to 96 kHz    For AAX, VST3, and AU Platforms

From the pristine sounds of historic spaces and the lush reverberant environments of medieval cathedrals, to legendary music clubs, INSPIRATA comes with a growing library of real-space content. Many are available for the first time in history, and many of them have never been experienced in such detail.

Moving virtual sound sources onstage or adjusting the listener position using a sample-based reverb processor was not possible without limitations until now. In a musical context, now you can move your sound sources and listener to find the optimum recording and mixing locations. Move an instrument slightly backwards onstage for a better balance, or move it closer for more clarity.

In postproduction, you can use INSPIRATA to automate the movement of your sound sources in every space—from close to far, left to right, as well as any of the acoustical parameters. The sound will instantly follow and sound the same as if you were in the space—only without the environmental noise. This unprecedented feature makes INSPIRATA a true workstation for spatial sound.

INSPIRATA makes it possible for you to control parameters that really matter to your ears. You can directly adjust acoustics and the sound of the space, instead of adjusting indirect properties that make no difference to the sound. Gone is the time when you need to bother with hall size, wall diffusion, or decorrelation only to get different results in each space. You now have full and independent control for how wide your sound source is in the space, how much of the blended sound reaches you, and how much it envelopes around your ears.

Spatial room acoustical parameters such as apparent source sound width (ASW) and listener envelopment (LEV) are controllable here—for the first time in any reverb software. In addition to these revolutionary controls, you can also adjust the orientation of your speaker feeds in space, facing your stereo or surround setup in any direction. And, you can change and automate all of these in real time.

In INSPIRATA, reverberation time and sound clarity are adjustable independently in each space using a single dedicated control for each. Despite these parameters not being totally independent, INSPIRATA pushes the limits and optimizes the reflections one by one to match the desired settings. The basis of the method of changing sound clarity (C80) has been published in an award-winning research paper by the IA team, and for the first time, it is now available in a real-time implementation.

Reverberation time, the mother of all acoustic parameters, is an important aspect of how long the decay lasts. But there is no single reverberation time in a hall and no single number at a given frequency. In natural spaces, the reverberation time varies slightly location by location, and this is fully preserved in INSPIRATA. Not only is the variation reproduced accurately, but it also reproduces the nonexponential nature of the decay of natural spaces through a dynamic range fully covering the theoretical possibilities of sound reproduction.

In real spaces, there is not only spatial dependency but also frequency dependency in the reverberation time. Deep tones usually reverberate for a longer time, while higher-pitched sounds fade away promptly for example, due to the absorption of the sound of the air in large volumes. The frequency-dependent nature of the reverberation time directly affects the overall tonal footprint of your sound. By using intuitive controls for setting the reverberation time in a frequency-dependent nature or by tilting the controls to be more bass or treble heavy, you can fine-tune how the space matches your mix with just a few clicks and achieve a level of warmth or brightness otherwise unimaginable.

INSPIRATA supports all major DAWs in AAX, VST3, and AU formats and is available in four price tiers with differing feature sets. This Personal Edition of the software supports stereo configurations only and offers a maximum sampling rate of 96 kHz. The Routing Matrix and individual controls for spatial and gain parameters, early reflections, and envelope effects for each sound source are not available in this version.

Related Questions and Answers

Q: 1. Am I able to screw on any lens filters to the front of the lens?

A: Unfortunately the GRIIIX does not have filter threads and as of January 10, 2022 I do not see any filter adapter available for it.

Q: 2. Is this compatible with Thunderbolt 3 (USB-C) found on newer iMacs? I could not find an answer on the Matrox website.

A: It worked on mine. I connected it to a (3) screens via this box I used USB-C to HDMI and USB-C to the square USB connector and worked just fine.

Q: 3. What is the difference between street edition and urban models?

A: The GR IIIx Urban Edition Special Limited Kit includes the GR IIIx camera in the special metallic gray body finish, a blue lens ring cap, plus a leather wrist strap with a blue application the matches the color of the lens ring and a black metal hot shoe cover. The street edition featurs a metallic gray body and orange-yellow ring cap.

Q: 4. Just to make sure I understand this product, I can do display port in, and then (by using adapters) go HDMI out and also VGA out? One monitor has VGA only and the other has HDMI.

A: Yes. You just buy adapters for the format youre wanting to send out and you can mix and match as needed.

Q: 5. Will this work with Apple iOS?

A: No. The OS Compatibility for this would be Windows 8 or Later.

Q: 6. Will this product work with the new Mac Mini with M1 Chip using a Thunderbolt 3 to Displayport Cable to connect the mac mini to the unit?

A: It should be able to work no problem if you are using Thunderbolt 3

Q: 7. Can I run this from a HDMI Port?

A: Matrox does not officially support this.

Q: 8. can this be used for non airbus aircraft?

A: Yes, you can use this flight system with any aircraft.

Q: 9. Would this work coming out of a video switcher if it were configured through the computer's interface first? I have multiple inputs that will go into a seamless switcher/scaler with 1 output, and I want to stretch it across 3 screens without having to purchase a video wall processor.

A: Possibly so, but I think that you would have to start up your computer on the multi-screen so that the software can recognize the connection. It might work either way, but I'm sure there would be the usual delay as it switches. We do not use our box in this way, however, I'm familiar with using a switch.

Q: 10. Will this work on a PC?

A: Yes.