The G10TII from Line 6 is a wireless transmitter for electric and acoustic guitar, bass, and any other instrument with a high-impedance output. It is designed to easily pair with the Relay G10 receiver or with Spider V 60, 120, and 240 built-in receivers.

The G10TII plugs directly into your guitar, eliminating the need for a bodypack and its associated cable. Simply recharge the internal battery by docking the unit on the G10 receiver or by plugging it into the Spider V amp input jack. A full charge gives you up to 8 hours of playing time, and in Sleep Mode, the battery life extends to up to 200 hours. USB charging is possible using the Relay G10TII USB charging cable (available separately).

For Relay G10 and Spider V 60, 120, 240    24-Bit Uncompressed Digital Transmission    2.4 GHz Band for Low Signal Interference    Transmission Range Up to 50'    Frequency Agile, 14 Channels    Rechargeable Internal Battery    Up to 8 Hours of Battery Life per Charge    200 Hours of Standby Time    FCC Compliant, License-Free Worldwide

The G10TII utilizes 24-bit uncompressed digital transmission to provide full frequency response, wide dynamic range, and pure signal quality from input to output (better than 110 dB dynamic range)

The system transmits in the 2.4 GHz range to minimize interference from TV broadcasts and other radio frequencies and is FCC compliant, meaning it can operate license-free worldwide

Pairs with Relay G10 wireless system and with the built-in receiver in Spider V 60, 120, and 240 amplifiers

The 24-bit uncompressed digital transmission provides full frequency response (10 Hz to 20 kHz), wide dynamic range, and pure signal quality from input to output—better than 110 dB dynamic range

2.4 GHz RF carrier frequency for low interference; transmission range up to 50'

Calibrated internal antenna avoids damage or deformity in normal use

Rechargeable internal battery gives you up to 8 hours of playing time per charge; sleep mode extends battery life up to 200 hours

LED lights up to indicate battery status

To charge battery, dock transmitter on the G10 receiver or plug it into Spider V amp input jack

Convenient USB recharging with Relay G10TII USB charging cable (available separately)

FCC compliant—no user license required worldwide

Related Questions and Answers

Q: 1. how good is this for pulling focus?

A: The Hollyland Mars 4K Wireless Video Transmission System has a latency of 0.06 sec.

Q: 2. Do these devices need a battery pack to function?

A: The Hollyland Mars 4K Wireless Video Transmission System comes with two wall power adapters included to power both the TX and RX. However, you will need to add batteries if you cannot be wired to wall power, like these: Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit (B&H # GENPF770CS)

Q: 3. Can this transmit a live image from the C500mk2 to a computer for live streaming? Say to Zoom or OBS

A: No sadly this would only be for transferring photos and videos files over to someone instantaneously. To do basically a live stream from one of these to a program such as OBS or Zoom. You would need a device that does Live HDMI transmission.

Q: 4. Can you input 4k video into either SDI or HDMI and get 4k video out of receiver in 4k SDI or HDMI?

A: Yes, SDI to HDMI cross conversion is supported. However the 3G-SDI ports will only support HD resolutions. If you need to work with 4k you would input and output via HDMI.

Q: 5. will it transmitted photo files ?

A: Yes.

Q: 6. Are these transmitters compatible with the Mars 400 Pro? To receive and transmit obviously in 1080p?

A: The Mars 400 is not compatible with the Hollyland Mars 4K Wireless Video Transmission System. However, the Mars 4k can work with the Mars 400 S PRO, Mars 300 PRO, and the Mars M1 display.

Q: 7. Would this be compatible with any receiver? Like a feelworld receiver+monitor combo?

A: The Hollyland Mars 4K Wireless Video Transmitter would work with the following Receiver. It would not work with other Brands. The Mars 4k transmitter can also output to the Hollyland Mars M1 5.5" Wireless Transceiver Monitor. Hollyland Mars 4K Wireless Video Receiver BH #HOHLMARS4KRX Hollyland Mars M1 5.5" Wireless Transceiver Monitor BH #HOMARSM1

Q: 8. With c300mk2, what is the difference between the e8 and the e6?

A: Functions are the same with both, supposedly the data rate with the E8 is better than the E6 . I haven't been able to do back to back testing as I sold the E6 and bought the E8 . The MK 2 needs updated firmware to use the E8 which may aboviate using the E6. Realistically, I can't swear that the image live view with the E8 is much better than the E6 but again, I couldn't test side by side.

Q: 9. Is it true that one transmitter can transmit to two receivers plus one M1 monitor all at the same time?

A: The Hollyland Mars 4K Wireless Video Transmission System can work with up to 4 apps, two receivers and no apps or one receiver and 2 apps. It does not have any app support when working with two receivers.

Q: 10. Can the receiver loop out to another HDMI monitor?

A: Yes, the FeelWorld 5.5" On-Camera Monitor with Built-In Wireless Receiver has an HDMI OUT.