Add the power of an NDI network to your teleprompting setup with the 12" IP Teleprompter Monitor with NDI from Telescript. The 1000 cd/m² high-bright monitor displays your NDI devices automatically and offers SDI, HDMI, VGA, and composite (BNC) inputs. This 4:3 monitor works with both NDI and NDI|HX signals and provides both web browser control and physical source selection buttons.

12" Diagonal Screen Size    NDI & NDI|HX Input via RJ45 Ethernet    3G-SDI, HDMI, VGA & Composite Inputs    Supports up to 1080p60 Video    4:3 Aspect Ratio/1000 cd/m² Bright    Browser Interface & Panel Buttons    Horizontal & Vertical Image Reverse

• High-bandwidth NDI
• High-efficiency, low-bandwidth NDI|HX

• Browser-based user interface
• Source-select panel buttons

• NDI via RJ45 Ethernet port
• Selectable tally source
• Tally port outputs data to a Telescript Tally One or ClockOne

• 3G-SDI, HDMI, composite (BNC), and VGA inputs
• 3G-SDI and composite outputs

Internet browser accessible user interface

Use at distances from 2 to 25'

Vertical and horizontal image reversing

Cold-rolled steel housing

Related Questions and Answers

Q: 1. How much does the Shinobi 7 weigh? Is it nice and light like its 5" counterpart? Related to its weight, what is the outer shell made of - plastic or metal?

A: The Shinobi 7 weights 577g or 1.04lb and is made of a Polycarbonate ABS Plastic.

Q: 2. What specific cable can I use to power from Dtap?

A: Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 • MFR #ATOMDTPCB2

Q: 3. Is this compatible with the Nikon Z9?

A: Yes, The Atomos Shinobi 7" 4K HDMI/SDI Monitor would work perfectly with the Nikon Z9. Also this is a good HDMI cable to work with. ZILR ZRHAA03 Hyper Thin Ultra High-Speed HDMI Cable with Ethernet (17.7") BH #ZIZRHAA0345

Q: 4. can i input 4k in hdmi and can get down convert hd from sdi ?

A: The SDI outputs of the Atomos Shinobi 7" 4K HDMI/SDI Monitor would only output in HD since they are 3G SDI outputs. But the Shinobi does support cross conversion. So you could input in 4 via HDMI and output in HD via SDI.

Q: 5. Does this work with the Komodo? Red Komodo states 12G SDI but this has 3G SDI. Not sure if that matters.

A: Atomos Shinobi 7" 4K HDMI/SDI Monitor will work will work with Red Komodo under certain output. Raw outputs is not available.

Q: 6. When using a battery and a dummy battery to DTAP simultaneously, will the battery drain first? Or does it pul power from both at the same time?

A: The Atomos Shinobi 7" 4K HDMI/SDI Monitor will draw power sequentially, so it would drain one battery first and then the other.

Q: 7. What kind of monitoring tools does this monitor provide? Does it have false color and reliable peaking?

A: The Viltrox 6" Touchscreen HDMI/SDI On-Camera Monitor has False Color, Histogram, Image Flip, Pixel-to-Pixel Zoom, RGB Parade, and Waveform.

Q: 8. Will this work on a Bmpcc6k camera?

A: Yes, the following unit will work but will only output in the following formats not 6k, HDMI (8/10-Bit 4:2:2) DCI 4K: 60/59.94/50/30/29.97/25/24/23.98 UHD 4K: 60/59.94/50/30/29.97/25/24/23.98 1080p: 60/59.94/50/29.97/25/24/23.98 720p: 60/59.94/50 SDI (8/10-Bit 4:2:2) DCI 2K: 60/59.94/50/30/29.97/25/24/23.98 1080p: 60/59.94/50/30/25/24/23.98 720p: 60/59.94/50

Q: 9. Will this support the Sony DSC RX10IV with all functionality?

A: No, the Atomos Shinobi 7" 4K HDMI/SDI Monitor will not have camera control support for the Sony Cyber-shot DSC-RX10 IV Digital Camera. You should consider the PORTKEYS LH5P II 5.5" Touchscreen Monitor with Camera Control for Sony FS5/FS7/FX6/FX9 (BH #POLH5PIISLNC • MFR #LH5P II -SLANC) instead.

Q: 10. Does this monitor have Arri locating pins on the top and bottom?

A: Yes, the Atomos Shinobi 7" has anti-twist pins on next to the 1/4" 20 threads.