17 Inch Touch Screen Monitor Hdmi

Telescript 17" Ip Teleprompter Monitor With Ndi/sdi/hdmi/vga/composite Inputs

Product Code: ga204806
Availability: In Stock

$6,885.00 $9,983.25

Qty

0 reviews Write a review

Description
Reviews (0)

Add the power of an NDI network to your teleprompting setup with the 17" IP Teleprompter Monitor with NDI from Telescript. The 1000 cd/m² high-bright monitor displays your NDI devices automatically and offers SDI, HDMI, VGA, and composite (BNC) inputs. This 4:3 monitor works with both NDI and NDI|HX signals and provides both web browser control and physical source selection buttons.

17" Diagonal Screen Size NDI & NDI|HX Input via RJ45 Ethernet 3G-SDI, HDMI, VGA & Composite Inputs Supports up to 1080p60 Video 4:3 Aspect Ratio/1000 cd/m² Bright Browser Interface & Panel Buttons Horizontal & Vertical Image Reverse

Parameters
Ethernet Speed	1 GB
Panel Size	17" / 43.2 cm
Screen Resolution	1280 x 1024
Range	40
LED Backlight	Yes
Brightness	1000 cd/m²
Supported Resolutions	NDI: 1920 x 1080p: 60/50/30/25 1280 x 1024p: 60/30 1600 x 900p: 60 1440 x 900p: 60/30 1360 x 768p: 60/30 1024 x 768p: 60/30 1280 x 720p: 60/30 800 x 600p: 60/30 NDI\|HX: 1920 x 1080p 60/50/30/25 1280 x 1024p: 60 1440 x 900p: 60 1360 x 768p: 60 1024 x 768p: 60 1280 x 720p: 60/50 800 x 600p: 60
Aspect Ratio	4:3
Inputs/Outputs	NDI: 1 x RJ45 Ethernet 3G-SDI Input: 1 x BNC 3G-SDI Loop Output: 1 x BNC HDMI: 1 x HDMI-Type A Composite AV In: 2 x BNC Composite AV Out: 1 x BNC VGA: DB-15
Power Input	12 VDC, 4 A: 1 x 4-Pin XLR
Housing Material	Cold-Rolled Steel
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer
Packaging Info
Package Weight	12.45 lb
Box Dimensions (LxWxH)	18.4 x 18.3 x 8.6"

High-bandwidth NDI
High-efficiency, low-bandwidth NDI|HX

Browser-based user interface
Source-select panel buttons

NDI via RJ45 Ethernet port
Selectable tally source
Tally port outputs data to a Telescript Tally One or ClockOne

3G-SDI, HDMI, composite (BNC), and VGA inputs
3G-SDI and composite outputs

Internet browser accessible user interface

Use at distances from 2 to 40'

Vertical and horizontal image reversing

Cold-rolled steel housing

Related Questions and Answers

Q: 1. Can you connect to both SDI and HDMI outputs simultaneously from a single input, or can only one of them be active at a time?

A: Yes, the Atomos Shinobi 7" 4K HDMI/SDI Monitor should output via both the SDI and the HDMI output simultaneously.

Q: 2. Does this monitor have Arri locating pins on the top and bottom?

A: Yes, the Atomos Shinobi 7" has anti-twist pins on next to the 1/4" 20 threads.

Q: 3. Will this monitor have any latency or lag with a Panasonic GH5 when using for focus and shooting "run and gun" style?

A: HDMI has an inherent delay regardless of the device. You can experience lag from the cable length or port on either end. If you want a zero delay experience, you can use the 3G-SDI input with a camera that can output it.

Q: 4. Will this work on a Bmpcc6k camera?

A: Yes, the following unit will work but will only output in the following formats not 6k, HDMI (8/10-Bit 4:2:2) DCI 4K: 60/59.94/50/30/29.97/25/24/23.98 UHD 4K: 60/59.94/50/30/29.97/25/24/23.98 1080p: 60/59.94/50/29.97/25/24/23.98 720p: 60/59.94/50 SDI (8/10-Bit 4:2:2) DCI 2K: 60/59.94/50/30/29.97/25/24/23.98 1080p: 60/59.94/50/30/25/24/23.98 720p: 60/59.94/50

Q: 5. Will this support the Sony DSC RX10IV with all functionality?

A: No, the Atomos Shinobi 7" 4K HDMI/SDI Monitor will not have camera control support for the Sony Cyber-shot DSC-RX10 IV Digital Camera. You should consider the PORTKEYS LH5P II 5.5" Touchscreen Monitor with Camera Control for Sony FS5/FS7/FX6/FX9 (BH #POLH5PIISLNC • MFR #LH5P II -SLANC) instead.

Q: 6. Is this compatible with the Nikon Z9?

A: Yes, The Atomos Shinobi 7" 4K HDMI/SDI Monitor would work perfectly with the Nikon Z9. Also this is a good HDMI cable to work with. ZILR ZRHAA03 Hyper Thin Ultra High-Speed HDMI Cable with Ethernet (17.7") BH #ZIZRHAA0345

Q: 7. What kind of monitoring tools does this monitor provide? Does it have false color and reliable peaking?

A: The Viltrox 6" Touchscreen HDMI/SDI On-Camera Monitor has False Color, Histogram, Image Flip, Pixel-to-Pixel Zoom, RGB Parade, and Waveform.

Q: 8. Is this compatible with the Canon C70?

A: Yes. The Atomos Shinobi 7" is compatible with the Canon C70.

Q: 9. Is WACADTAP21M Watson 2.1mm barrel to D-Tap cable suitable to power this device?

A: No, the DC barrel needs to be a locking barrel. Here are some other options: Atomos D-Tap to DC Barrel Coiled Cable https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html?sts=pi&pim=Y Atomos Locking AC Power Adapter for Flame Series Monitor https://www.bhphotovideo.com/c/product/1473479-REG/atomos_atompwr012_locking_ac_power_adaptor.html

Q: 10. Is this monitor able to support Open Gate signals such as from the Lumix S5ii?

A: If the open-gate signal can be output in a compatible resolution and frame rate, such as a max DCI 4K30, then the Viltrox 6" Touchscreen HDMI/SDI On-Camera Monitor would be able to display it. It would not be able to display the full 6K open-gate resolution.

There are no reviews for this product.