The black IRC132-PoE Series Short Range 850nm IR PoE Illuminator from Iluminar is designed to be used with true day/night CCTV cameras. This illuminator is invisible to the human eye but visible to black/white and true day/night cameras, which makes it a covert/non-obtrusive illumination. Also, thanks to its invisibility to the human eye, it does not create the problem of light pollution. It has a longer range than visible light due to the higher wavelength of approximately up to 919’ (280m). The illuminator is designed to provide superior IR lighting for CCTV cameras.

Supplied with an IP66 rating, this illuminator is vandal-proof and designed for both indoor & outdoor use. The tempered glass panel and die-cast aluminum housing provide protection from the harsh weather conditions and rapid temperature variations (-58 to 140°F).

Short range IR illuminator for true day/night CCTV cameras

PoE powered

IEEE802.3af compliant

Distances up to 66'

30° angle

850nm wavelength

IP66 weatherproof rating

Built-in photocell IR on/off

Related Questions and Answers

Q: 1. can this be plugged in to wireless modem for power?

A: The modem would need to supply a constant and reliable appropriate PoE voltage.

Q: 2. Any lumens rating for this unit?

A: Unfortunately the manufacturer doesn't have a specification for it

Q: 3. would it work with UniFi 6 Long-Range Access Point?

A: The Ubiquiti Networks U-POE-af PoE Adapter BH #UPOEAF will power the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUS.

Q: 4. Will this work with a PTZ camera or an audio controller that uses POE+?

A: The Ubiquiti Networks U-POE-AT PoE+ Adapter is designed to power PoE devices from Ubiquiti specifically. The manufacturer does not advise using this with non-Ubiquiti products, as it may not function correctly.

Q: 5. Without a reset button on the PoE injector, how does the remote reset capability work?

A: When you run the Ubiquiti software, Unifi software will be able to find the unit on the network and then reset the Ubiquiti Networks U-POE-af PoE Adapter.

Q: 6. This will supply POE power to cameras located 800 feet away?

A: If you are speaking about the distance from the VHW-HWPS-C4 to the cameras, then we are looking at 100 meters which is the ethernet standard. However, the distance between the VHW-HWPS-B and the VHW-HWPS-C4 is 300 meters.

Q: 7. Is there a way to mount this on a tripod?

A: The AXTON Nano AT-3M-S 44'-Range Compact Infrared Illuminator with Day/Night Sensor (850nm, 150°),BH # AXAT3MS150, is not natively tripod mountable

Q: 8. Is this 1 line input and POE output to 4 cameras? I have 1 available cat6 cable but need 2 cameras, long range, on the other side.

A: Yes. We also have a LONGSPAN Duo if you are only needing 2 cameras off the one long ethernet run. If you use the base unit on the switch end, VLS-1P-B, with the 57V DC power supply, VPSU-57V-800, you will receive 25 Watts total across the two ports. If you have any questions, please feel free to call us (800) 679-1590 or email into sales@veracityusa.com.

Q: 9. can this be plugged in to a wireless modem for power?

A: The modem would need to supply a constant and reliable appropriate PoE voltage.

Q: 10. HOW DO YOU CONNECT POWER to IRC 99 -A80-024?

A: You run a 12 volt connection through the water resistant connector and connect it to the terminals inside.