The black IRC132-PoE Series Short Range 850nm IR PoE Illuminator from Iluminar is designed to be used with true day/night CCTV cameras. This illuminator is invisible to the human eye but visible to black/white and true day/night cameras, which makes it a covert/non-obtrusive illumination. Also, thanks to its invisibility to the human eye, it does not create the problem of light pollution. It has a longer range than visible light due to the higher wavelength of approximately up to 919’ (280m). The illuminator is designed to provide superior IR lighting for CCTV cameras.

Supplied with an IP66 rating, this illuminator is vandal-proof and designed for both indoor & outdoor use. The tempered glass panel and die-cast aluminum housing provide protection from the harsh weather conditions and rapid temperature variations (-58 to 140°F).

Short range IR illuminator for true day/night CCTV cameras

PoE powered

IEEE802.3af compliant

Distances up to 36'

45° angle

850nm wavelength

IP66 weatherproof rating

Built-in photocell IR on/off

Related Questions and Answers

Q: 1. Does THE bOSCH iir-50850 have a power adapter included?

A: The Bosch IR Illuminator 5000 SR (850nm), BH #BOIIR50850SR, does not include a power supply.

Q: 2. Does this model have PoE?

A: It is designed for Input Voltage 12 to 32 VDC or 24 VAC. Non PoE.

Q: 3. Does this work with 2.5 gbe needed for the UniFi 7 Pro?

A: The Ubiquiti Networks U-POE-AT PoE+ Adapter (BH # UBUPOEAT) will power the Ubiquiti Networks UniFi U7 Pro Tri-Band Wi-Fi 7 Access Point (BH # UBU7PROUS). It features the required 802.3at (PoE+ 30 W) via the RJ45 Gigabit Ethernet port.

Q: 4. Is this suitable for night time filming with infrared cinema camera?

A: The Raytec VARIO2 i16 Long Range Covert Infrared Illuminator (Black, 940nm), BH # RAVAR2I161C, will work with any camera using 940nm IR.

Q: 5. can this be plugged in to wireless modem for power?

A: The modem would need to supply a constant and reliable appropriate PoE voltage.

Q: 6. How do I supply 12V to this Iluminar IR919? The document describes the cable as a 6 wire in different colours - There is only 4 wires on the mounted cable!

A: Hello Bo. The Low voltage IR919-2 series unit has 6 wires. The black and red wire are for power. The other wires are not needed unless you want to bypass the photocell. a href= http://iluminarinc.com/images/pdf/iriluminators/IR919-2-Series-v2.0.pdf target= _blank http://iluminarinc.com/images/pdf/iriluminators/IR919-2-Series-v2.0.pdf/aa href= http://iluminarinc.com/images/pdf/Iluminar-installation-instructions-Series-II-v2.pdf target= _blank http://iluminarinc.com/images/pdf/Iluminar-installation-instructions-Series-II-v2.pdf/aIf you have an IR919-PoE-2 model then you will only have 4 wires. The PoE units will have two cables. One for a CAT5 cable. You need a Hi-PoE injector that can power a unit up to 60W. The second cable is for telemetry, which again, is for bypassing the photocell. a href= http://iluminarinc.com/images/pdf/iriluminators/IR919-PoE-2-Series-v1.0.pdf target= _blank http://iluminarinc.com/images/pdf/iriluminators/IR919-PoE-2-Series-v1.0.pdf/aa href= http://iluminarinc.com/images/pdf/Iluminar-PoE-installation-instructions-Series-II-v1.0.pdf target= _blank http://iluminarinc.com/images/pdf/Iluminar-PoE-installation-instructions-Series-II-v1.0.pdf/aRegards,Eddie Reynolds eddier@iluminarinc.com

Q: 7. can this be plugged in to a wireless modem for power?

A: The modem would need to supply a constant and reliable appropriate PoE voltage.

Q: 8. would it work with UniFi 6 Long-Range Access Point?

A: The Ubiquiti Networks U-POE-af PoE Adapter BH #UPOEAF will power the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUS.

Q: 9. Any lumens rating for this unit?

A: Unfortunately the manufacturer doesn't have a specification for it

Q: 10. Is this garuanteed to work with non-Ubiquiti devices?

A: The Ubiquiti Networks U-POE-AT PoE+ Adapter is not guaranteed to work with non-Ubiquiti products.