Create smooth-motion shots with the heavy-duty GS11 Camera Stabilizer Arm with Suction Mount Kit from CAME-TV. The kit includes a stabilizer arm and a carbon fiber suction cup mounting kit. The arm utilizes hydraulic cylinders for smooth movement, and its solid shock-absorbing construction is designed to carry payloads from 2 up to 22 lb. It is designed to mount on top of your gimbal or camera rig in an inverted orientation.

The arm connects to a 32 to 36mm diameter rod or pipe with a locking clamp, and adjustments are made via knobs at multiple points along the arm's joints to balance up and down movement. The shock-absorbing head provides additional shock absorption and offers a cheese plate with multiple mounting threads to mount a variety of camera or gimbal mounts such as the DJI Ronin 2/S/S2/SC 2, Zhiyun WEEBILL/CRANE, Feiyu, or MōVI.

The included suction mounting kit allows you to mount the stabilizer arm on a car, so you can achieve smooth moving shots. The kit includes three heavy-duty suction cups, 32mm carbon fiber rods, and adjustable joints to mount the camera on a variety of car sizes. The arm's mounting clamp then mounts onto the end of the 32mm carbon fiber rod on the end of the suction mount assembly.

Shock-Absorbing Arm with Cradle Head    Carbon Fiber Suction Cup Mounting Kit    For Smooth-Footage Small Camera Gimbals    Mounts Midsize Rig in Inverted Mode    2 to 22 lb Maximum Load Capacity    Clamps to 32 to 36mm Diameter Rod    Hydraulic Damping System    Aluminum & Stainless Steel Construction

Attach your gimbal to a vest, car, boat, or moving vehicle for a smooth, stable shot

Suction cup mounting kit included with 32mm carbon fiber rods and joints to mount onto a car or vehicle for moving shots

Designed for inverted gimbal mounting

Features a hydraulic damping support system and shock-absorbing springs

Clamps onto a 32 to 36mm diameter rod or pipe

Multiple damping adjustment knobs to fine-tune balance

Shock-absorbing head features hydraulic damping; a cheese head with mounting threads is on the end to mount various gimbal or camera mounts

Suitable for DJI Ronin S/SC/RSC 2/RS 2/M/MX, Moza, Feiyu, ZHIYUN WEEBILLL and CRANE series, and other similar-sized gimbals

Related Questions and Answers

Q: 1. How can I download the manual?

A: According to CAME-TV, they do not have a manual however they suggest using on the instruction video on the CAME-TV web site. They add that if you have any question or problem to contact them directly. americas@came-tv.com

Q: 2. Is there a quick release shoe to mount video camera?

A: A quick release is not provided. Please see the following link for three popular quick releases. http://bhpho.to/1SxP2Lo

Q: 3. on the came tv site it says the low-shooting bracket is Included. Is It? I do not see it on the list of in the box.

A: The low-mode bracket is included. This thing is ready to go! The only thing I wish it came with was a docking plate, so that achieving dynamic balance was easier, but as is, it fits on the top of a c-stand, and is adequate.

Q: 4. It's compatible for DSLR and HD Camera?Do I need special accessories for mounting DSLR and HD Camera?

A: The arms specification is 5.5 to 33.1 lb (2.5 to 15 kg). Most DSLR's barely make that minimum. My experience with Steadicams is that they work best when the weight is in the middle of the arms specifications. You may wish to get an arm that is set up for that light a weight. Otherwise, you can mount any camera you wish physically.

Q: 5. Is there an adapter/accessory that will allow you to mount a Ronin?

A: The CAME-TV post is 16mm. If you get the GyroVu Universal DJI Ronin Armpost Adaptor for Glidecam and Tiffen Stabilizers B&H # GYGVDJIUAP, there is a 16mm adapter included for the CAME-TV post. Then you can mount the Ronin. (Not the Ronin-M)

Q: 6. Can this vest work with the glidecam hd4000?

A: Two considerations here. 1. Since the tube that interfaces the arm to the rig is not a standard, it depends what the two diameters are. Unfortunately, the manufacturer's do not list this information. 2. You need keep the HD4000 and camera set up to 5.5 lbs or over in order for the arm to work. If you are not aware, there is a large Steadicam community out there. There are forums that are available to you that probably have user experience in this combination.

Q: 7. Where can I find the actual metal poll needed for this to clamp? Ideally with a base with 1/4 threaded holes.

A: If you need the mounting rail and suction cups, get the following kit instead of the CAME-TV GS10-RS2 Video Camera Stabilizer Arm with DJI RS 2 Base (2 to 22 lb): the CAME-TV GS10 Camera Stabilizer Arm with Suction Mount Kit (2 to 22 lb Load), B&H # CAGS10SUCTN.

Q: 8. does it come with a traveling bag or what is a good bag to use with the system?

A: This is what comes with this:Steadicam 2.5-15 KGSupport vestSupport ArmHDMI cableBalance weightsBattery mount baseMonitor mountHere is one possibility for case. Porta Brace RIG-4SRKOR Wheeled Rig and Camera Case with Interior Kit B&H # PORIG4SRKOR

Q: 9. I'm planning to buy this mainly because my camera and lens are too heavy for me, I hope this vest will make the camera easier to carry and less heavy, but from what I've read online it's quite a workout. I'm a little worried because I'm on the skinny side. In your opinion, does this vest do a good job at spreading out the weight of the camera more evenly on your body or is even more of a workout considering the weight of the stabilizer and vest itself? Thank you!

A: This is a heavy system, but it will distribute the weight over your body. It will be a lot less strain specifically on your arms.

Q: 10. I’m confused, in the description it says it holds up to 26 pounds but in the Q&A answers many people state it holds up to 33 pounds. Could someone clarify?

A: CAME-TV has the Pro Camera Carbon Stabilizer with Support Vest and Support Arm kit rated for a 4.4-26.4lb payload.