Lengthen your camera rig's top handle or create a custom handle using the 5.4" Handle Extension HEX-5 from ARRI. Designed to attach to an anti-twist 3/8"-16 thread at the end of a compatible top handle like the ARRI CCH-4, this is one of several extension lengths available from ARRI. In addition to the Multi-HEX 3/8"-16 stud, this component offers one rear and five top ARRI 3/8"-16 threads, plus several ARRI 3/8"-16 and 1/4"-20 accessory threads on both the right and left sides.

ARRI-Style 3/8"-16 Stud Handle Extension    ARRI 3/8"-16 Top/Rear/Side Threads    Multi-HEX Screw, 1/4"-20, 5/32" Threads    Connect Multiple Extensions    Create Custom Handle Design    5.4" Length, Anodized Aluminum

ARRI CCH-4 and other top handles with an ARRI-style 3/8"-16 thread

Related Questions and Answers

Q: 1. what windjammer I need to the ae kit?

A: They no longer make a blimp or windjammer for the Rycote Stereo Windshield WS AE ORTF Kit.

Q: 2. Will it reduce the power output of the AD200?

A: No power reduction with the AD200.

Q: 3. Will this work on the Sony a7RV?

A: No, Sony GP-X1EM Grip Extension will not work on the Sony's A7RV.

Q: 4. will a Peak Design Capture Clip fit with this grip extension (and be usable)? Thanks

A: No, when using the Sony GP-X1EM Grip Extension, it is difficult to use the Peak Design Capture Clip.

Q: 5. There are two little "pins" on the grip extension that are supposed to fit into the camera and there's only one receiving hole on my a9 for one of the pins. The other pin which has no hole to fit into seems to prevent a flush fit and I notice a small gap between the grip extension and the camera. Anyone else notice this? Unless I tighten it really tight it can slip a little.

A: this is design for Sony A9 and there is no issue using it

Q: 6. Will this grip also work on the A7R3?

A: Yes, I have the A7R3 and the grip is the right size and locks into position.

Q: 7. What's the WiFi range?

A: According to DJI, the wi-fi range is 10 meters.

Q: 8. what is the total length of the windjammer, I'm trying to fit it to my old rycote which is appproximately 420 mm long ?

A: The Rycote Windjammer #3 has a length of 430mm with a height of 125mm. This is designed to work with Rycote's WS3 windshield which has a total length of 370mm with end caps installed.

Q: 9. Is this for the lamphead and ballest?

A: Both will fit but it is tight.

Q: 10. How lenght it is?

A: The Windjammer WJ4 is designed to fit the Modular Windshield WS4, which has a body length of 330mm, and overall with end caps of 440mm. As per the link below:a href= http://www.bhphotovideo.com/c/product/322534-REG/Rycote_086001_Windshield_Kit_4.html target= _blank http://www.bhphotovideo.com/c/product/322534-REG/Rycote_086001_Windshield_Kit_4.html/a