This Vinyl Sampler 6-Pack from Silhouette is intended for those getting started with creating vinyl projects and who want to try a small variety of colors. Included are six 12 x 12" sheets, each in a different color and texture: matte pink, matte dark pink, glossy pink, glossy dark pink, glitter pink, and metallic silver. The glossy surface sheets have a permanent adhesive and are suitable for indoor and outdoor applications. All the others have a removable adhesive for indoor use. The matte and glossy sheets feature a 75-micron thickness, the glitter sheet is 100 microns, and the metallic sheet is 250 microns.

These sheets are compatible with the Silhouette CAMEO, CAMEO 2, CAMEO 3, and CAMEO 4 cutting machines. They can be loaded directly into the machine and do not require the use of a cutting mat. They're recommended to be used with Silhouette transfer tape to move cut-out images from original material backing onto intended project surfaces.

The surface of these vinyl sheets is not printable.

For Indoor/Outdoor Decorations/Signage    Glossy & Glossy Dark Pink (for Outdoors)    Matte & Matte Dark Pink (for Indoors)    Glitter Pink & Metallic Silver (Indoors)    For CAMEO Cutting Machines

Related Questions and Answers

Q: 1. When this support system is set to it's minimum width (4'2 ) what is the largest sized roll of seamless paper you can use (in terms of width)?

A: Being that the minimum width of the crossbar in this kit is just below 4.5 feet, the widest possible seamless roll that can be used would be 2 ft wide by 36 feet long. An example of such is the Savage Widetone Seamless Background Paper (#66 Pure White, 26 x 36') B&H # SABGP2666. Please see the image below for reference.

Q: 2. What is the thickness of the crossbar?

A: The diameter of the cross bar is about 1 inch.

Q: 3. Can someone tell me the length of each of the crossbar pieces please? :)

A: Three of the bars are 3' 4 and one of the bars is 3' 1 1/2 .

Q: 4. DOES THE TRAVELLING CASE HAVE A BUILT IN BATTERY SO YOU CAN CHARGE THE LIGHTS? OR YOU NEED TO PLUG IT CONTINUOSLY?

A: Each of the four lights in this kit have their own built in 2600mah battery individually.

Q: 5. Will this work with the Olympus ode m1 Mark ii and Mark iii?

A: Yes this bracket can potentially work with the Olympus OM-D E-M1 Mark II/Mark III.

Q: 6. can the light be on while charging?

A: Yes, you can have this connected to power while it is operating.

Q: 7. What remote control range are people reliably getting with a single light? Website stats 80m, wondering if this is accurate.

A: According to Aputure the the Sidus Mesh network can extend up to 1300' with no more than 262' (80 meters) between compatible light fixtures. This would however be under ideal circumstances with minimal interference. The distance may be less if there are other wireless signals in the area.

Q: 8. Can that bag be purchased separately? I lent mine out and the dumb sob lost the bag.

A: Yes, the bag is sold separate. Photek Carry Bag for Background Support System (Black) BH #PHS40104CB • MFR #S-4010-4CB https://bhpho.to/2QrfSNf

Q: 9. How long does it take to fully charge these batteries when using the Panasonic charger? Thanks.

A: Good question, sir. I charge before batteries are fully discharged: 2 hours which typical which suggests a rather fast charge. Batteries are fairly warm afterwards. To get the very most charge, I've found a day after charging, re-install & this tops off a bit more energy. I'm very happy w/ charger. Do not use w/ alkalines (1.5V); NiMH are 1.2V as is the charger. Best wishes, sir.

Q: 10. will this fit a z6 with the ftz adapter?

A: the Vello MFB-12 has three separate camera mount channel options for the 1/4-2" screw mount so there are a variety of of positioning options available for mounting to the base of the Nikon Z6. The Nikon FTZ adapter also incorporates a 1/4-20" socket at its base providing another mounting option - but large speedlights might cause excessive strain on the lens mount, so that configuration is not recommended.