This Vinyl Sampler 3-Pack from Silhouette includes three 9 x 24" sheets, each providing the look and feel of a different type of wood with the flexibility of vinyl. Included are one ebony, one walnut, and one maple sheet for indoor use.

The 9" wide sheets are compatible with the Silhouette Portrait, Portrait 2, Portrait 3, CAMEO, CAMEO 2, CAMEO 3, and CAMEO 4 cutting machines. They can be loaded directly into the machine and do not require the use of a cutting mat. They're recommended to be used with Silhouette transfer tape to move cut-out images from original material backing onto intended project surfaces.

The surface of these vinyl sheets is not printable.

For Indoor Decorations and Signage    Ebony, Walnut, and Maple Wood Sheets    For Portrait and CAMEO Cutting Machines    Permanent Adhesive    150 Micron Thickness

Related Questions and Answers

Q: 1. Can I trigger another camera (Canon 1D/Nikon D5) using 2 triggers? I want to shoot one camera and trigger another same time. If so, I see the provided cables are not for camera but rather for flash unit.

A: To trigger a Nikon D5 and a Canon 1D, you will need a total of three PocketWizards. You will need the kit with two, or the PocketWizard PlusX 2 Pack, and one extra one, B&H # POPWPX (https://bhpho.to/4gdBWFa), and these two cables: B&H # PON10ACC1K (https://bhpho.to/3Xynwbu) and B&H # POCMN3ACC1K (https://bhpho.to/4cRVEn2).

Q: 2. So if the film is expired how bad will the pictures turn? :(

A: I process a LOT of old film, and David is very much correct concerning black and white film. In color film however, the viability depends on film speed (the faster the worse)and as he said, temperature. Heat is sensitized material's worst enemy. We can compensate for a lot of color shift in printing, but the latent image often fades, as well as the film itself becoming fogged, producing lousy pictures. Sometimes, we can salvage images by printing them as black and white, doing away with the color shift. For long storage, even after shooting the film, store it in airtight containers (like the film can it came in)and drop it in the freezer. A day at room temperature is enough to defrost 35mm film for use. Humidity control is also important. For more info, Google Kodak bulletin E-30

Q: 3. What camera is best for this film?

A: Any 35mm film camera. I use it in small and large cameras. It is especially good with cameras that only have a 125 appendure

Q: 4. hello. This film is compatible for a Lubitel 166B? thanks

A: Any 120 film is compatible with it. Yes.

Q: 5. I need a remote shutter release for a Pentax K70 that'll work from up to 200 ft. away Will these work to remotely trigger the shutter on a Pentax K70? If so, is a 3.5mm cable required to connect from a PlusX Pocketwizard receiver (mounted on the K70 hotshoe)to the 3.5mm mic-in port on the K70 body, or is no cable necessary because the shutter signal is routed through the K70's hot shoe? If it is compatible with the K70, what camera functions are supported?

A: I do not own a Pentax K70, so I cannot attest that the Pocket Wizard will work to release the shutter. It should and you will need the 3.5mm cable. I always need the cable to release the shutter from my Pocket Wizards to Canon 1Dx and 5D MKII.

Q: 6. Does the PlusX have auto power off?

A: I'm sorry, no.

Q: 7. I used this film with Nikon FM-10 and Sekonic L-308X-U on a daylight, i sat my light meter to 400 ISO, am following the light meter readings and i still getting under exposed images, what u think is my problem. btw sometimes i push my film but i still not satisfied with the results. (**note** camera is in good condition)

A: Most probably your light meter is off and needs calibration.

Q: 8. What is the expiry of this film?Thank you.

A: Unfortunately, we would not be able to provide the exact expiration date of a specific film stock, as B&H agents do not have access to the warehouse (and wouldn't be able to guarantee the film checked would be the one you received even if we had access). That being said, any film that was within 6 months of its expiration date would be sold as short dated and specifically listed as such on our site.

Q: 9. Can this pocket wizard work with Novatron lights? I ordered this but the sync input on my light does not match the input pin from this pocketwizard

A: You will need a Novatron to Pocketwizard cable specific to each connector. I normally get mine from flashzebra, but I'm sure B&H sells them too. Give them a call.

Q: 10. I am using a Nikon D7000 and a Nikon SB600 flash. Since my SB600 does not have a port on it to plug the Plus X into it, what adapter will I need to get that works with the SB600 which allows me to plug my Plus X into it?

A: You can use this hotshoe to mini cable to plug any hotshoe style flash to your PocketWizard: B&H # WIHSFM3