Enjoy premium sound with the black Bose Professional DesignMax DM5P, a pair of pendant loudspeakers that utilize a coaxial design for better phase accuracy and a refined sound with smooth, rich bass, and clear, intelligible highs. The speaker can handle up to 240W of peak power to drive the 5.25" woofer and 1" neodymium dome tweeter, resulting in an 80 Hz to 20 kHz frequency response (-3 dB) and a peak SPL of 111 dB.

The DM5P features a recessed single-point suspension system for a sleek, attractive appearance. The top panel provides access to the 6-pin Euroblock input/thru connector and the transformer taps for 70/100V operation. A recessed single-point suspension system and four cable ties are included.

Coaxial Design for Refined Sound    Rich Lows and Clear Intelligible Highs    240W Peak Power Handling    65 Hz to 20 kHz Frequency Response    120° Nominal Coverage    111 dB Peak SPL    70/100V & 8-Ohm Transformer Bypass    Includes Suspension Cable System    Includes 4 Cable Ties

• Delivers rich lows and clear, intelligible highs with a coaxial two-way design—no DSP or EQ required. For even better sound, use select Bose DSPs and amplifiers to enable Bose loudspeaker EQ and SmartBass processing, which expands performance and response at any listening level
• Ensure a consistent listening experience throughout the room with the Dispersion Alignment system, which matches the coverage of the woofer to the pattern of the tweeter
• Blend with any room design with elegant form factors, minimum-bezel grilles with removable logos
• Install easily with industry-standard accessories—includes Euroblock connector 
• Provide an open, attractive aesthetic with pendant loudspeakers featuring a recessed single-point suspension system that keeps hardware out of sight and can be used to hold and hide a service loop for easy access
• Compatible with any of the 16 DesignMax loudspeakers for mix and match, including in-ceiling, surface-mount, and pendant form factors, subwoofers, high SPL compression-driver models, compact low-profile models, and outdoor-rated options

Related Questions and Answers

Q: 1. Will the Tamrac T0250 hold a Nikon D850 with a 200 - 500 Lens mounted and a Nikon D90 With a 28 - 300 Lens Mounted?

A: Yes, the Tamrac Professional Series: Anvil 27 Backpack will hold a Nikon D850 with a 200-500mm lens mounted and a Nikon D90 with the 28-300mm lens mounted..

Q: 2. Is the base detachable?

A: 756120

Q: 3. Can the bag hold a Sony FE 400mm f/2.8 GM lens?

A: Yes, the Tamrac Professional Series: Anvil 27 Backpack (Black) is just deep enough to fit the ony FE 400mm f/2.8 GM lens.

Q: 4. How tall does this get with the arm all the way up?

A: It is 80.5 to the top of the Grip head

Q: 5. Does the Logos are printed on both side or just one side?

A: The RODE PSA1+ Pro Studio Boom Arm features the Rode logo printed on both sides of the sleeve.

Q: 6. Can it hold Neat King bee 2 ?

A: Yes, the RODE PSA1+ Pro Studio Boom/Arm can be used with the Neat Microphones King Bee II Large-Diaphragm Condenser Microphone. The PSA1+ can support up to 2.7 lb. and the King Bee II weighs 2.47 lb. As other options for studio arms that can support more weight, you can use the Samson MBA38 Microphone Boom Arm (B&H #SAMBA38) or the Auray BAI-2N Two-Section Broadcast Arm with Internal Springs (B&H # AUBAI2N), which both support up to 5 lb., or the Gator Deluxe Frameworks Desktop Mic Boom Stand (B&H # GADFWDMBS3K), which will support up to 4.4 lb.

Q: 7. Does this bag replace the Tamrac 5588 Expedition 8x Backpack or the Tamrac 5587 Expedition 7x Backpack?

A: As the 5577 and 5588 have the same exterior dimensions, one might tend to say both . Unfortunately, one of the major differences between the two is that the 77 accepts a 15.6 laptop, while the 88 accepts a 17 laptop.The Anvil 27 accepts most 15 laptops and is close to weighing 2lbs. less than both the discontinued models.There may be other variations between the 77 and 88 which might sway the answer to your question one way orthe other, but as the tamrac website suggests no replacement for the 77 and suggests try Anvil for the 88, I would conclude that Anvil 27 is meant to replace the 8x.

Q: 8. does it fit a 15 laptop?

A: I AM NOT SURE . I HAVE A 14.5 .--FIT PERFECTLY

Q: 9. Hows this different from the psa1?

A: The Rode PSA1+ and PSA1 are both two-section boom arms that rotate 360 degrees. The PSA1+ has a maximum reach of 37" horizontally and 34" vertically while the PSA1 has a maximum reach of 32" horizontally and 33" vertically. Additionally, the PSA1+ features an integrated cable management system with external clips and the PSA1 includes touch-fasteners to strap the mic cable to the arm.

Q: 10. What's the Length of Desk Mount Screw?

A: The length of the RODE PSA1+ desk-mount grommet screw is about 2" (threaded portion) and about 3" overall (threaded + unthreaded portions).