The black powder coated WLC99-PoE Series Short-Range White Light Illuminator from Iluminar is designed to provide visible lighting for color network cameras via PoE (Power over Ethernet)-enabled network infrastructure. It employs 6 SMT (Surface Mount Technology) white LEDs that provide illumination up to 13' (4m). This IP66-rated illuminator is vandal-resistant and can be installed both indoors and outdoors. Its die-cast aluminum housing and tempered glass panel provide protection from harsh weather conditions and rapid temperature variations ranging from -40 to 122°F (-40 to 50°C). The illuminator features dual power input (12 VDC or 24 VAC) and automatic light on/off via built-in photocell.

Short-range white light illuminator for color CCTV cameras

Illumination distance up to 13' (4m) and illumination angle of 120°

PoE powered (IEEE802.3af compliant)

IP66-rated weatherproof

Automatic light on/off via built-in photocell

Even illumination

Black powder coated stainless steel wall mount

Related Questions and Answers

Q: 1. HOW DO YOU CONNECT POWER to IRC 99 -A80-024?

A: You run a 12 volt connection through the water resistant connector and connect it to the terminals inside.

Q: 2. Yes can a pressure switch be added to this

A: Not sure maybe if you have tail cap with that

Q: 3. Any lumens rating for this unit?

A: Unfortunately the manufacturer doesn't have a specification for it

Q: 4. Does this stand come with spigots?

A: Hi Guy, It comes with a single (1) removable double-ended spigot.

Q: 5. Does THE bOSCH iir-50850 have a power adapter included?

A: The Bosch IR Illuminator 5000 SR (850nm), BH #BOIIR50850SR, does not include a power supply.

Q: 6. Does the 46.5" folded length include the length of the removeable spigot?

A: The closed length of the Impact Heavy-Duty Light Stand (Black, 13') measures 46.5" / 118.1 cm which include the length of the removeable spigot.

Q: 7. What kind of wood is the chair made of?

A: The Filmcraft Pro Series Short Director's Chair (18", Natural Frame, Black Canvas), BH #FISDCN, is made of Beech Wood.

Q: 8. This will supply POE power to cameras located 800 feet away?

A: If you are speaking about the distance from the VHW-HWPS-C4 to the cameras, then we are looking at 100 meters which is the ethernet standard. However, the distance between the VHW-HWPS-B and the VHW-HWPS-C4 is 300 meters.

Q: 9. Can you attach a ball head and camera to this ?

A: Safest way to attach a ball head to the Impact Air-Cushioned Heavy-Duty Light Stand (Black, 13') is a ball head adapter like one of these, https://bhpho.to/3QD1xLW. And I would use a sand bag on the bottom of stand like, https://bhpho.to/47AKnFm.

Q: 10. How do I supply 12V to this Iluminar IR919? The document describes the cable as a 6 wire in different colours - There is only 4 wires on the mounted cable!

A: Hello Bo. The Low voltage IR919-2 series unit has 6 wires. The black and red wire are for power. The other wires are not needed unless you want to bypass the photocell. a href= http://iluminarinc.com/images/pdf/iriluminators/IR919-2-Series-v2.0.pdf target= _blank http://iluminarinc.com/images/pdf/iriluminators/IR919-2-Series-v2.0.pdf/aa href= http://iluminarinc.com/images/pdf/Iluminar-installation-instructions-Series-II-v2.pdf target= _blank http://iluminarinc.com/images/pdf/Iluminar-installation-instructions-Series-II-v2.pdf/aIf you have an IR919-PoE-2 model then you will only have 4 wires. The PoE units will have two cables. One for a CAT5 cable. You need a Hi-PoE injector that can power a unit up to 60W. The second cable is for telemetry, which again, is for bypassing the photocell. a href= http://iluminarinc.com/images/pdf/iriluminators/IR919-PoE-2-Series-v1.0.pdf target= _blank http://iluminarinc.com/images/pdf/iriluminators/IR919-PoE-2-Series-v1.0.pdf/aa href= http://iluminarinc.com/images/pdf/Iluminar-PoE-installation-instructions-Series-II-v1.0.pdf target= _blank http://iluminarinc.com/images/pdf/Iluminar-PoE-installation-instructions-Series-II-v1.0.pdf/aRegards,Eddie Reynolds eddier@iluminarinc.com