Ideal for stashing in a backpack but functioning like a full-size stand, the 5' Adjustable Light Stand with 180° Tilt Head from Lume Cube rises to a maximum height of 60", has a minimum height of 14", and can support gear weighing up to 6 lb. The stand is topped by a 180° tilt head and folds down to 14" for storage or transport.

Load Capacity: 6 lb, Range: 14 to 60"    180° Tilt Head, 1/4"-20 Screw

Related Questions and Answers

Q: 1. Can the clamp be turned 90º so arca plates are oriented left-to-right instead of front-to-back?

A: Yes. You may use a hex key to reposition the quick release clamp on the Oben VH-A30 Tilt Head so it may be rotated 90 degrees so the head may be used to tilt the camera left-to-right instead of front-to-back.

Q: 2. Is this camera compatible with Windows Hello?

A: No, this camera is not compatible with Windows Hello?

Q: 3. My plate on the camera runs left to right (length wise). Can the clamp be mounted in 90 degree configuration?

A: The clamp can be rotated 90.

Q: 4. Can the quick release head be rotated 90 degrees, so it can be used with an L-bracket and lens without a lens foot?

A: This head can be tilted 90 degress and works with a camera that has an L-bracket attached.

Q: 5. Can the clamp be rotated 90 degrees to accommodate camera on L-bracket?

A: If you have an L-bracket, the connection mechanism is the same whether you are shooting horizontally or vertically. All you do is rotate the camera without changing anything on the monopod. Or if you are using a long lens, you just release the knob that controls the orientation of the foot relative to the lens. In other words, there is no problem.

Q: 6. How long is the USB cord?

A: The cable length is 6' in length.

Q: 7. Unfortunately no. What I suggest is to add a power inverter. a href= https://www.bhphotovideo.com/c/product/479777-REG/Belkin_F5C400_140W_F5C400140W_Power_Inverter.html target= _blank https://www.bhphotovideo.com/c/product/479777-REG/Belkin_F5C400_140W_F5C400140W_Power_Inverter.html/a+a href= https://www.bhphotovideo.com/c/product/228193-REG/Bescor_BES018XLRATM_BES_018XLRA_Shoulder_Pack_Lead_Acid.html target= _blank https://www.bhphotovideo.com/c/product/228193-REG/Bescor_BES018XLRATM_BES_018XLRA_Shoulder_Pack_Lead_Acid.html/a

A: Unfortunately no, but you can make one with a power inverter. See below. https://bhpho.to/2LF2bpQhttps://bhpho.to/2L2B32V

Q: 8. Can the quick release clamp fit using a ProMediaGear base plate ?

A: Yes, the VH-A30 can accept a ProMediaGear Base Plate.

Q: 9. What is the actual weight of the head (not the packaging weight)?

A: The ProMediaGear tilt head:Weight: 14 ounces / 400gHeight from top of Arca Compatible Clamp to Arca Compatible Bottom Plate: 3.5 inchesHeight from top of Arca Compatible Clamp to Ball Adjustment in Neutral Position: 4 inchesWidth with Arca Compatible Clamp Open including knob: 4 inchesWidth with Arca Compatible Clamp Closed including knob: 3.5 inchesArca Compatible Top Clamp Length: 2.5 inches

Q: 10. To use both the webcam and the light at the same time it looks like you'll need a USB2 and USB-C port available, is that correct?

A: The webcam uses USB A (2.0) and the Light uses a USB C, but would included a USB C to USB A cable