Looking to update or replace the custom foam in your Carry Lite case? Check out the Magma Bags Carry Lite Pick & Pluck Replacement Foam, a two-foam set for the Carry Lite XXL Plus. Simply place the new foam set into your case and pluck out the foam for custom fit.

2 Layers, Pick & Pluck Replacement Foam

Related Questions and Answers

Q: 1. Why a glossy finish? I would think matte would be more useful, less prone to picking up reflections.

A: According to DSC: Film-style production schedules dont generally allow much time to shoot a glossy chart and eliminate reflections, but matte surface can be too delicate for field production; DSCs AcuFlect wide dynamic range, washable gloss surface, eliminates unreliable matte chart flare.

Q: 2. Is the mount size compatible with light shaping accessories from the BRX line?

A: I believe so! The elincrhom heads are all the same size, so it should fit without any problem.

Q: 3. How do you keep the modeling lamp on. As soon as I take a photo, the modeling lamp goes off. I'm using the Elinchrom EL19366 Skyport Transmitter?

A: Hi,If you check your instruction book you will see how to control the modeling lamp.Here is the item you are inquiring about.Setup Visual-Flash-Control (VFC) modeProportional modelling lamp setup (PMS) Enter VFC setup :1. Press Prop push button for more than 2 seconds, until the display shows F.X (X is 0 or 1) toenter into the Modelling lamp setup menu.2. Use the Flash-Power up and down button to change setting:- F.0: Visual-Flash-Control = OFF. Modelling lamp remains ON after flash.- F.1: Visual-Flash-Control = ON. Modelling lamp switches off during recharging.3. The display switches back to normal mode after approx. 4 seconds if no button is pressed. Thesettings are automatically stored.4. Standard setting is F.0, VFC = OFFI hope this helps.Regards,Will H

Q: 4. Will this work with a canon eos 250d? Even the hot shoe included?

A: Yes, the Elinchrom Skyport transmitter included with the Elinchrom D-Lite RX 4/4 Softbox to Go Kit would be compatible with DSLR cameras such as the Canon EOS 250D.

Q: 5. What is the color temperature for this unit? Is it the same as the dlite 200ws? And does the temperature change with increase in flash power?

A: According to Elinchrom, all of the current D-Lite RX monolights have a flash tube balance for 5500 Kelvin when the units are set to full power. Unfortunately, there is no information regarding what the color temperature would be at lower power settings.

Q: 6. Is there a portable power pack to go with the D-Lite RX 4? I can't find one anywhere. I'd like to take it outdoors for Senior sessions.

A: No, it uses mains power - for outdoors you would probably need a generator.Alternatively use something like an elinchrom ranger quadra system

Q: 7. Does this deflector plate (2040-DP) is for the Rapid Box Duo 32 or is the (2030-DP)?

A: Given the size of the octal box you are purchasing, I would buy the 2040-DP. I own the Rapid Octa for my profoto light and it's 36 . I also own the rapid box 26 Octa with the 2030-DP plate for my Canon 600 speedlites. That plate would be too small for the Duo 32 . Get the 2040-DP.. Good Luck.

Q: 8. What size bolt is that?

A: I'm not sure what you call the bolt but the center rod adapter which accepts a screw to attach the beauty dish disc to the rapid Box is approx. 1 1/16 long including the threads, approx. 15/32 dim., approx. 11/16 non thread portion. The screw is approx. 3/16 dim. The center rod adapter and screw seem to be for Westcott devices only.

Q: 9. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 10. What is the color temperature in Kelvin of the Elinchrom strobes?

A: The flash are 5600k.