Protect against surges and get battery backup power with the CP850PFCLCD Uninterrupted Power Supply from CyberPower. Featuring line-interactive topology, this Energy Star-qualified uninterruptible power supply sports 10 total electrical outlets. These outlets are supported by 1150 Joules of surge protection which can be extended to a network via two RJ45 Ethernet ports. Five of the outlets also feature battery backup power, providing connected equipment with up to 11 minutes runtime at half load and 2 minutes runtime at full load, with a 4 ms transfer time. Once configured, you can rest assured your devices are safe as CyberPower provides a connected equipment guarantee of up to $250,000.

11 min Runtime at Half Load    2 min Runtime at Full Load    8 Hour Typical Recharge Time    Line-Interactive UPS Topology    120 VAC Input Voltage    Right Angle Plug with 45° Offset    1050 Watt Output    120 VAC On-Battery Voltage    Sine Wave Waveform    1150 Joules Surge Suppression

Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.

Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.

The UPS generates energy that is identical to, or cleaner than the utility company's power grid. Benefits include low total harmonic distortion, minimal electrical noise, and optimal line clarity.

Displays immediate, detailed information on the UPS battery and power conditions. The color display quickly alerts users to potential problems before they can affect critical equipment and cause downtime. Screen tilts up to 22 degrees for easy viewing.

AVR increases the AC power and maintains a safe voltage level without switching to battery mode and conserving battery life.

Prevents power surges that travel through Ethernet lines from causing damage to electronics.

Exists when a line-interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.

This model is an ENERGY STAR-certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.

A patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.

Minimizes noise during operation for a quieter work environment.

This optional software from CyberPower provides a user-friendly dashboard interface for controlling and monitoring the UPS.

CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date.

CyberPower will repair or replace properly connected equipment if it is damaged by a power surge. This guarantee covers amounts up to $250,000.

Related Questions and Answers

Q: 1. I run 2K (SDI) video into this this and it converts (with power) to HDMI 1080p. Do I have this right? With that happening can I loop an SDI monitor to run video out of that as well? Is it too much data to run a 2k Alexa Classic picture through it?

A: Yes, that is right. The converter supports 2K over SDI, but not HDMI. If you feed it a 2K SDI input it'll output 1080 HD on the HDMI output. There is no processing on the SDI Loop Out so that will still be a 2K SDI output.

Q: 2. Can i use both outputs (SDI & HDMI) at the same time with 1 input?

A: Yes, the Blackmagic Design Micro Converter BiDirectional SDI/HDMI 12G with Power Supply is capable of sending an SDI and HDMI signal at the same time with one input.

Q: 3. Would this device work to connect a Pocket 6k via HDMI to a Live U mobile unit that only has SDI (for live broadcast)?

A: Yes the Black Magic converter would work. It would be HD only. The Pocket cameras only output in HD. Also please note the Blackmagic Design Micro Converter HDMI to SDI 12G requires a power supply to work.

Q: 4. I have a CPU that outputs in HDMI, I then am taking it to a SDI input on a newtek 3play system. Will the conversion work HDMI to SDI?

A: No it will not. The Blackmagic Design Micro Converter SDI to HDMI 3G (with Power Supply) is the opposite of what you are looking to do. It takes a video signal from an SDI source and converts it to HDMI. You need a converter that will convert an HDMI source to SDI.

Q: 5. Does this carry closed captioning like 608 and 708?

A: The Blackmagic Design Micro Converter BiDirectional SDI/HDMI 3G (with Power Supply) does not support closed captioning.

Q: 6. I'm just looking for verification on if this would work. I need to split an SDI signal into SDI and HDMI. So it would be Source SDI - audio converter device - bidirectional SDI input - SDI output to capture card.... HDMI output - monitor. It's a weird situation and

A: You could use the Blackmagic Design Micro Converter BiDirectional SDI/HDMI 3G to split an SDI input into HDMI and SDI outputs.

Q: 7. Does anyone know what battery plate is in that example image?

A: The plate pictured in the first image on the Tilta Dual-Handle Power Supply Bracket for Select DJI Gimbals' product page is the Tilta Battery Plate for DJI RS 2 Dual-Handle Power Supply Bracket (V-Mount)(BH #TITGADHBV). See: bhpho.to/3R1cjd0

Q: 8. Is there a difference in performance between the regular or bidirectional micro converter in terms of latency?

A: The Blackmagic Design Micro Converter Bi-Directional SDI/HDMI 3G and the other Mini Converters have very little to no latency. They would both perform the same.

Q: 9. Can this be used to convert the hdmi signal from a satellite TV receiver to coax to a TV?

A: No. Satellite TV content has HDCP (content copyright protection) and will be blocked from coming thru this unit. This will only work with your own generated content (from a camera or other video source that does not contain copyrighted content).

Q: 10. can this be used to convert program output from atem tv pro k switcher?

A: Blackmagic Design Micro Converter BiDirectional SDI/HDMI 12G can convert any signal that is compatible..