Lighting designers looking for a compact road-ready moving head fixture will be impressed with the CHAUVET PROFESSIONAL Maverick Force S Spot, a feature-rich moving head spot that's ideal for installs and mobile DJ rigs in small-to-medium-sized clubs, theaters, houses of worship, touring stages, and event spaces. The Maverick Force S Spot is powered by a bright, 350W, cool-white LED with an 8-slot color wheel, two rotating gobos, as well as motorized focus, 5-facet motorized/rotating prism, motorized frost, and motorized iris effects. Additionally, custom gobos created in collaboration with leading designers (available separately) can be stacked on top of one another for creative effects.

The Maverick Force S Spot can be controlled via DMX, W-DMX, sACN, and Art-Net protocols. It also converts TCP/IP to DMX for shorter data cable runs and offers RDM control over DMX for remote addressing and troubleshooting. The touchscreen LCD display and six buttons let you easily navigate the menu structure by either pressing the buttons or touching the display directly. The universal, autosensing power supply and pass-through I/O allow you to connect a single power cable to the wall and daisy-chain up to 2 units at 120V or up to 5 units at 240V. The Maverick Force S Profile ships with two Omega brackets with mounting hardware and a Seetronic Powerkon IP65 power cord.

Clubs, Mobile DJs, Small/Medium Venues    Compact/Lightweight 350W LED Moving Spot    CMY Color Mixing, CTB Filter, 16-Bit Dim    8-Slot Color Wheel, Split/Scroll    2 Gobo Wheels (Static/Rotating)    4.1 to 43.4° Motorized Zoom    Iris, 5-Facet Prism, Frost    DMX, W-DMX, sACN, and Art-Net Control    3-Pin and 5-Pin DMX I/O, RJ45 Connectors

• Fully featured, compact and lightweight 350 W LED yoke spot fixture including CMY color mixing, a color wheel, zoom optics, and two gobo wheels, one rotating, and one static
• 16-bit dimming of master dimmer for smooth control of fades
• Variable CMY color mixing system to create a wide pallet of colors
• DMX, WDMX, sACN, and Art-Net for full flexibility of control options
• RDM Enabled for remote addressing and trouble shooting
• 3.8° to 43.4° zoom range for variable beam sizes
• Iris, 5-facet prism, and frost for beam control
• True 1 compatible power input
• Three setup menu presets and preset sync for cross loading to multiple like fixtures for easy shop setup
• USB slot for software uploads
• Battery backup display with auto-rotate depending on fixture orientation

• Light Source: 1 LED (CW) 350 W, (2.7 A), 8400 K, 50,000 hours life expectancy
• Color Temperature (at full): 6858 K
• CRI: 68.6
• CRI with CRI filter: 89.6
• Front Lens Diameter: 119 mm
• Beam Angle: 3.8° to 36.5°
• Field Angle: 4.8° to 40.4°
• Cutoff Angle: 5.1° to 43.4°
• Zoom Range: 3.8° to 43.4°
• Lumens - Source: 20,000
• Lumens – Output: 14,407
• Illuminance (3.8°): 62,004 lux @ 5 m
• Illuminance (43.1°): 1,745 lux @ 5 m
• Selectable PWM: 600, 1200, 4000, 6000, 15000 Hz

• Pan and Tilt: 540°/270°
• Pan and Tilt Ranges: 540°, 360°, 180° pan/270°, 180°, 90° tilt
• Colors: 7 (including CRI and CTB filters) + white, split colors, continuous scroll at variable speeds
• Colors: CMY Wheels
• Gobos (1): 7 + open (glass), rotating, interchangeable, indexing, slot-n-lock, continuous scroll at variable speeds
• Gobos (2): 9 + open (metal), static continuous scroll at variable speeds
• Dimmer: Electronic
• Shutter/Strobe: Electronic
• Zoom: Motorized
• Focus: Motorized
• Frost: Motorized
• Iris: Motorized
• Prism: 5 Facets, motorized, rotating
• Strobe Rate: 0 to 20 Hz
• Move-in-Black: Yes
• Dim Curves: 4

Related Questions and Answers

Q: 1. Will this fit with forza 300b ?

A: Godox Spot Lens can be used with a Forza 300b.

Q: 2. Hi, just double check if this head compatible with the 501PL quick release plate? Thanks

A: The short answer to your question is no; the509HD head is not compatible with the 501PL quick release. You may want to consider getting a 504PLONG quick release plate instead. -- B. L. S.

Q: 3. Does the SmallRig PH8 include the handle to level it in a tripod bowl? Photos show bare threaded rod at bottom.

A: Yes, the SmallRig PH8 Professional Fluid Head does include the tie down handle in the following image included. It comes with everything required to attach the head to a 75mm bowl tripod. It is not a flat capable head. The handle is shown in the left image: https://bhpho.to/49q573i

Q: 4. I am hoping to combo this head with a pair of Gitzo sticks. If I get the 100mm half ball adapter and combine it with the Gitzo Series 3 legs, will the 509 mount correctly?(Below are the exact products that Im looking at combining it with) Gitzo Series 3 6X Systematic Carbon Fiber Tripod (X-Long) Gitzo Systematic 100mm Half-Bowl Video Head Adapter Series 5

A: I think the 100mm half ball is an universal system. I use my 509 head with a Benro tripod.Regards,Leif Rune Sundli

Q: 5. The pay load of 509 hd head is 13.5kg and it has a maximum counter balance of 12 kg,so can i use ursa of 7.5 kg,cannon lens of 4 .5 kg and battery ,view finder of 2 kg,(total of 15 kg) ,on this head? Manfrotto repreaentative says it is compatable to upto 25 kg,plse reply,regards dr asok

A: The 509HD has a load capacity up to 29 pounds or 13.1kg. A total of 15kg is above the load capacity. You would need to look at the Manfrotto 526 instead, which has a load capacity of 35 lbs or 16kg.https://bhpho.to/2NbClNJ

Q: 6. Does FF-OF4 have an umbrella receptacle like the Impact 4-socket fluorescent fixture (FF-S4) has?

A: yes it has, right in the middle between the bulbs

Q: 7. Which quick release adapter works with this plate?

A: The plate that comes with this head is model 509PLONG. So the adapter you need would be the 577.

Q: 8. With the half-ball removed, can the head be attached to the Sirui R2204 Carbon Fiber Tripod?

A: Yes, the SmallRig PH8 Professional Fluid Head is compatible with the Sirui R2204 Carbon Fiber Tripod.

Q: 9. Does this works/fit to aputure 600c?

A: No, the Godox VSA-36° spot lens is only rated for 300 watt systems.

Q: 10. Is the half ball removable from the bottom of the had?

A: Yes, the half ball adapter on the SmallRig PH8 Professional Fluid Head is attached to the head with a 3/8"-16 screw, which can be removed.