Expand your listening horizons with the silver A-S501 Integrated Amplifier from Yamaha. Featuring up to 100W per channel of RMS power at 6 ohms, this amp is equipped with digital inputs for connecting devices like televisions and Blu-ray/DVD players. It offers dual stereo outputs, giving you the ability to power two sets of speakers in different rooms and switch between them, or have them both playing at the same time. To increase the bass output of your sound system, there's also a terminal for connecting a subwoofer.

To reduce distortion and degradation and produce the cleanest possible sound, the A-S501 employs Pure Direct Mode. Activated via a button on the front of the unit, this mode causes input signals to bypass unused circuits and cuts off those circuits' power supply. To further ensure quality sound, the amplifier's continuously variable loudness control allows you to balance low and high frequency sounds so you can hear a full tonal range at any volume.

This Yamaha amplifier was built with energy efficiency in mind, and uses a power management system to switch itself to idle mode when not in use. The A-S501's internal circuitry mirrors itself symmetrically to produce higher signal purity and lower degradation. The chassis is reinforced with a solid center bar to reduce vibration and features a brushed aluminum front panel and knobs. The system comes with a remote control for easy operation.

100W x 2 (6 Ohm RMS) Power Output    Optical and Coaxial Inputs    Speaker A, B or A+B Selection    Subwoofer Out    Continuously Variable Loudness Control    Pure Direct Mode    Power Management (Auto Power Off)    Reinforced Chassis    Symmetrical Layout    Brushed Aluminum Front Panel

The Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.

The A-S501 features an analog loudness control on the front panel, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low- and high-frequency sounds, providing full tonal range at any volume level, compensating for the natural loss in the human ear of high and low frequencies at soft levels.

This amplifier's left and right channels are organized in a straight, symmetrical layout for limiting distortion and increasing signal purity.

The base of the A-S501's chassis is reinforced with a solid center bar to increase rigidity support and vibration damping, which limits resonance.

You can connect two separate speaker systems in different rooms and switch between them or have them both play at the same time by switching the dial on the front of the unit.

You can connect a turntable with an MM phono cartridge to play vinyl records, allowing you to enjoy records in addition to modern media sources.

This amplifier puts itself into standby mode when it detects that it hasn't been used in approximately 8 hours, minimizing power consumption.

Control your music from afar with the included remote, finished to match the design of the amplifier. The remote comes with batteries and can also be used to control a Yamaha CD player.

With the optional YBA-11 Bluetooth Wireless Adapter, you'll be able to stream music wirelessly from a Bluetooth capable mobile phone or a PC to the network receiver. This amplifier features a DC-out connection on the rear panel to power the adapter.

The rotary encoder makes it quick and easy to select input sources, and the LEDs clearly show which source is selected so you can easily switch between them, even in a dark room.

Related Questions and Answers

Q: 1. Does this have switchable voltage? I'm an American living in Germany for the time being and I need it to work with 120v or 240v.

A: There is no switchable voltage. This is the North American model which offers 120V AC/60Hz power only.

Q: 2. how do i hook up a subwoofer to this amp, there is no sub-out?

A: The A1200SL is more meant for Music Audio Enthusiasts who are connecting to Higher end Audiophile Grade speakers. It is common among most Higher End Integrated Amplifiers to not include a Subwoofer connection. The Denon PMA-A110 for instance also does not provide a Subwoofer out.

Q: 3. I am considering buying a Yamaha A-S501 Integrated Amplifier (Silver) from B&H. I have only one question:According to the manual (see page 9 ), in the rear of the equipment there are Audio input/output jacks Used to connect external components, such as a tuner,etc. Are they really audio output jacks? or only input jacks? Can I connect, for instance, a stereo transmitter for headphones?or similar equipments?Carlos

A: Input: 5 x RCA1 x Phono for turntable1 x Optical1 x Coaxial -------------------------------------------------------------------------Output: 2 x RCA4 x Speaker terminal1 x Subwoofer1 x Headphone1 x DC (accessory power)

Q: 4. I have a set of 4ohm speakers and a set of 8 ohm speakers I want to listen to at the same time. Do I connect the 4 ohms to the B speaker terminals and the 8 ohm speakers connected to the A side? The info box on page 5 seems to suggest that. And then set the Impedence selector to LOW ?Thanks!Dick

A: You can use whichever speakers you choose, in either the A or B location. Yes. If one pair, either A or B is 4 ohms, you do select Low.

Q: 5. Does this amp support 15" loud speakers.

A: Possibly: 120W x 2 (6 Ohm RMS) Power Output

Q: 6. I want to connect four 8 ohm speakers to the S-501 and listen to them at the sametime.Am I correct in setting the impedence switch to high? Thanks.

A: No. Set the impedance switch to low. Note the instructions on the back panel.

Q: 7. Can you add an equalizer? Does it have a tape monitor function?

A: There is a channel on this integrated amplifier with a record out, so you could connect an equilizer into this system. Oherwise you would have to connect the equilizer between one component, such a CD player, and the amplifier.

Q: 8. I want to connect four 6 ohm speakers to the yamaha a s501 amp and use at the same time.Do I set impedence switch on back of amp to high or low ?

A: Set to low.

Q: 9. My speakers can be bi-amped. Can I do this with this amp.

A: You could bi-amp two speakers with this amplifier, using the second speaker zone as well as the first.

Q: 10. Can you rack mount this unit?

A: The Yamaha A-5801 does not have rack ears, but can be racked using a shelf, such as the Auray RS-V-1U One-Space Vented Rack Shelf (1 RU), B&H # AURSV1U.