The CTA Digital Security Clamp Mount with Universal Holder and Full Cable Management combines adjustments, joints, and pivot points with a convenient clamp that transforms any counter, desk, or table into a versatile digital workspace. The diagonal grip allows easy access to all plugs, headphone jacks, ports, or credit card readers. A convenient lock and key system deters theft; the adjustable grip and exchangeable foam pads allow this universal mount to hold any device you want, with or without a protective case.

This arm installs easily using an adjustable scratch-protected C-clamp. The VESA plate at the top is ready to attach to any of CTA's VESA-mount tablet enclosures or other compatible cases and features a full 90° rotation for use in either landscape or portrait orientation. The spring-loaded elbow joint adjusts 180°. To create the perfect work angle, simply loosen the mid joint with the included Allen wrench, position, and tighten. The base joint rotates 135° to facilitate just the right viewing angle. At the base of the mount, you'll find a handy USB extension port for easy charging while in use. Just plug the attached USB cables into a computer or other power source, then plug your tablet directly into the base of the stand. Interior cable routing gives ample space to keep cords out of sight.

Fits 7 to 13" Tablets    Supports Loads up to 19.8 Pounds    180° Titl & 135 ° Rotation    USB 3.0 Ports

• Universal locking mount with smooth adjustability
• 75 x 75 and 100 x 100mm VESA plate easily connects to a range of devices
• VESA plate rotates 90° for use in both landscape and portrait orientations
• Elbow joint tilts a full 180° and locks in place with the included Allen wrench
• Base rotates 135°
• Four conveniently-sized foam pads to fit tablets with or without a case
• C-clamp adjusts to any table or surface from 0.39 to 3.14" thick
• Interior cable routing system reduces clutter
• VESA mount fits most 17 to 32" devices or monitors
• Supports up to 19.8 pounds
• USB 3.0 ports create convenient charging

Related Questions and Answers

Q: 1. What's the difference between a compact clamp and a full size clamp on the RRS BH40 ballhead?

A: The length of the jaws on the full size clamp is about 1 cm longer than the jaws on the compact clamp. This gives the full size clamp more clamping surface, better for longer lens plates.I got the full size clamp and I'm very happy with it. I use it while hiking and the size is not a problem.

Q: 2. Is this compatible with the Gitzo Systematic series 5 tripod legs? If not, any good recommendation?

A: This head is compatible with Gitzo Series 5 Tripods.

Q: 3. Greeting fellow seekers-of-light. Which lens plate to buy for Nikon 300mm f/2.8?

A: If you visit the really right stuff website, there is an area where where you specify the type of lens and it matches it with the right lens plate. Hope that helps

Q: 4. How stable is it for very precise target alignment at maximum zoom with a large telephoto (e,g. 100-400)? I.e does it sag after tightening?

A: This is a very stable ball head there is no sag

Q: 5. What would be the rationale for purchasing screw knob versus lever release clamp?

A: Both are equally competent at holding the camera in the clamp, and for both lever clamps I own neither has ever slipped. It is possible that the lever could be accidentally hooked on something and it could open without intending to, though it's never happened to me and I've hiked with tripod and camera over my shoulder a number of times. The screw knob would be the most positive and of the two if a person was really worried about accidental opening.What I like best about the lever clamp is the speed of opening, which facilitates quick swap of the camera from portrait to landscape orientation (if you have an L-plate) and fast adjustments of the camera's position in the clamp when adjusting centering.

Q: 6. RRS BH55 can the locking lever be adjusted in any way to suit other QR plates, on the stem of the lever seems to have threads ?

A: As far as we are aware, RRS heads and clamps only accept arca-swiss style plates. Any modification (whether possible or not) to these devices is therefore at your own risk.

Q: 7. Does this compatible with Gitzo GT3543XLS Systematic Series 3 Carbon Fiber Tripod ?

A: I have mine mounted on a GT4533LS. Works great. Why don't you call manufacturer? I think the thread is standard that fits most products but you should call RRS and Gitzo.

Q: 8. Will the BH work with Kirk L-Bracket?

A: Yes, this head will work with the Kirk L bracket.

Q: 9. will this head fit on a Gitzo GK2542 mountain series 2 tripod?

A: Yes it will fit on the Gitzo GK2542 mountain series 2 tripod.

Q: 10. What is the mounting screw used for?

A: The mounting screw would be 3/8" female screw opening.