Lay the foundation of your next PC build with the ODYSSEY X Full-Tower Case from Lian Li. Sporting a unique modular design, the ODYSSEY X allows you to adjust panels and plates to take advantage of larger components, promote airflow, or gain convenient access to your I/O ports.

Designed for advanced builders looking to customize every aspect of their build, the ODYSSEY X supports three configurations each with their own benefit. Steel and aluminum construction support a wide range of motherboards including EEB, E-ATX, ATX, micro-ATX, and mini-ITX form factors. Tempered glass folding panels provide a clear view of your hard work while promoting a unique style. The ODYSSEY X allows you to install up to three 2.5 or 3.5 inch storage drives behind the motherboard tray for a clean look. Eight expansion slots allow you to use a wide range of graphics and utility cards. Enhance your cooling capabilities with either fan, radiator, or custom liquid cooling loops that vary depending on the configuration. A modular I/O front panel module can be relocated to another place depending on the mode and can be oriented in your preferred direction.

EEB, E-ATX, ATX, Micro-ATX, Mini-ITX    Modular Design    Aluminum & Steel Frame    Tempered Glass Folding Panels    3 x 2.5 / 3.5" Drive Bays    8 x Expansion Slots    USB 3.2 Gen 1 Type-A & Type-C Ports    3.5mm Audio Out | 3.5mm Audio In    Radiator, Fan & Liquid Cooling Support    Dedicated Cable Management Area

The ODYSSEY X sports a unique modular design, allowing you to modify the case in various orientations designed to provide various benefits depending on your plans. Each bracket is designed with high end materials comprised of aluminum and steel. Sandblasted anodized aluminum finish adds a sense of customizable style and function to your case, protecting your components while enhancing airflow performance. No matter the orientation, you can clearly see your components through the tinted 4mm-thick tempered glass panels that promote airflow through the various gaps.

Designed to give you unobstructed airflow for enhanced thermal controls, this configuration supports a wide range of cooling options with multi-radiator support. Easily install 480mm and 280mm or dual 360mm radiators, giving you ample room for CPU and GPU liquid AiO coolers. An included adjustable water pump mounting bracket converts from the front I/O mounting bracket to allow the installation of tall water pumps used in custom liquid cooling loops. You can also install up to three 120mm or two 140mm fans on the top bracket, and four 120mm or three 140mm fans on the front bracket for enhanced airflow.

Dynamic mode provides you with the standard configuration, allowing you to install two 360mm radiators as well as small and medium liquid cooling tanks for custom loops. Install three 120mm or two 140mm fans on the top bracket, three 120mm or two 140mm fans on the front bracket, and up to three 120mm or 140mm fans on the side panel.

Dynamic-R (Rotate) mode allows you to change the orientation of your build and relocate your back I/O ports to the top of your system for convenient access while maintaining proper cooling. Install 480mm and 280mm or dual 360mm radiators for CPU and GPU liquid AiO cooling. Install up to three 120mm or two 140mm fans to the front bracket, and up to four 120mm or three 140mm fans to the bottom bracket.

Related Questions and Answers

Q: 1. How to use this monitor with Canon EOS R6II ? HDMI Cable provided does not work.

A: The Canon EOS R6 Mark 2 requires a Micro HDMI to Full HDMI to be operated with the Lilliput A7S 7" Full HD Monitor with 4K Support.

Q: 2. What does the input lag look like. Is there any input lag when using this? On fujifilm, sony etc?

A: I havent noticed any lag at all. I use a Sony a6500, I did have to purchase a separate cable because the one it comes with is hdmi to mini hdmi and most cameras need micro hdmi just a heads up.

Q: 3. If I shot 4k 60p would I still get an image on this monitor or would nothing show up?

A: No, the Lilliput A7S 7" Full HD Monitor with 4K Support (Black Case) does not support 4K 60p.

Q: 4. Will the touchscreen also allow me to navigate the menus on my Canon 5D Mark 3

A: Unfortunately that capability does not pass through the HDMI cable.

Q: 5. Does it come with a Canon lp-e6 battery plate or just the Sony?

A: werty

Q: 6. What dc power cable

A: The Lilliput A7S 7" Full HD Monitor with 4K Support (Black Case) comes with an AC adapter included, however if you need a replacement and do not want to contact the Lilliput for the origional AC adapter, you could get the Watson Pro 12V 2A Power Supply (2.1mm), BH #WAPS12V2A21, to power the monitor instead.

Q: 7. Can this monitor be hand held for a director?

A: Yes, you would need a wireless receiver that connects via HDMI. A wireless transmitter attached to the camera will also be required.

Q: 8. Is it possible to use the advanced features of this monitor such as focus peaking, false color, etc. even if the camera doesn't offer these features (e.g., if I'm using an entry-level DSLR to shoot video that typically doesn't come with these visual overlays)?

A: I apologize, I just purchased this monitor and haven't had time to play with it much.

Q: 9. When I use this monitor the touchscreen on my a6500 turns off. I use the touchscreen to select focus area. What can I do to be able tu use both?

A: The A7S doesn't have touch function

Q: 10. Will this monitor work with a Sony HVR Z7U?

A: YES