Reclaim some of your desktop space with the Gabor Levitouch Single-Arm Desktop Monitor Mount. It features one two-section arm with adjustable spring tension that supports one 17 to 32" display weighing up to 19.8 lb with 75 x 75 or 100 x 100mm VESA patterns. A low-profile clamp and base attaches to desks and tables up to 3.1" thick and will fit into most tight spaces, like a cubicle. With 21" of arm extension, you can place your monitor as close as you like; for deeper tabletops, grommet mounting hardware is included for mid-desk attachment.

This monitor stand provides swivel and tilt adjustment for optimal monitor placement and 180° of rotation for easy switching from landscape to portrait orientation. With 6.9 to 17.1" of height adjustment, you can place your monitor exactly where you want. Integrated cable management helps keep your cables organized and your desktop looking neat.

Supports 17 to 32" Displays    Holds Displays up to 19.8 lb    75 x 75 & 100 x 100mm VESA Support    Mounts to Desk Edge or Through Grommet    Provides ±40° of Tilt Adjustment    Provides 180° of Rotation Adjustment    360° of Swivel & Pivot Adjustment    Height Adjustment from 6.9 to 17.1"    Quick-Release VESA Plate    Integrated Cable Management

This mount features rugged aluminum construction and a heavy-duty desk clamp that supports 17 to 32" monitors weighing up to 19.8 lb. Moving your monitor off the desktop can free up valuable space and reduce clutter.

A quick-release VESA plate lets you mount and unmount your monitor with ease. This is a handy feature if you need to break down your workstation or change monitors.

The desktop mount's spring mechanism makes positioning your monitor effortless and provides optimum viewing comfort. There are no locking knobs to wrestle with; just reach out and move your screen wherever you want.

The mount offers 360° swivel & pivot and ±40° of tilt adjustment so you can precisely position your screen and easily rotate between landscape and portrait orientation. The arm tension can be adjusted to prevent your monitor from shifting out of place.

Even with a large desk or tabletop, you won't need to strain to see your monitor. The monitor arm reaches over 21" so you can sit comfortably to view your work, videos, or a Zoom call.

The locking VESA receiver lets you mount and unmount monitors with ease, further simplifying the process of breaking down your workstation or changing monitors.

The mount is thoughtfully designed with cable channels that let you route your cables and keep them organized; rather than hanging loosely, your cables stay bundled together and out of sight in these channels.

Related Questions and Answers

Q: 1. Can this be used to mount an AD200 strobe with a 1'x3' strip box? Does it articulate horizontally and vertically?

A: If you purchase the Impact 5/8" Stud with 1/4"-20 Female Threads, B&H # IMSRP112P, the Godox S2 Speedlite Bracket for Bowens, B&H # GOS2, and your softbox with a Bowens speedring adapter, and the setup weighs less than 11 lbs, then yes, the Godox AD200Pro TTL Pocket Flash Kit should be compatible for use with the Manfrotto Double Articulated Arm - 3 Sections With Camera Bracket. The articulating arm will only adjust in one plane of motion; either horizontally or vertically, but not both (depending on how the arm is orientated in the clamp/grip head you are using to hold the articulated arm).

Q: 2. A quick question; the product description talks about the item having a 1/4 thread but is it referring to the connection on the bottom of the arm or the top? I want to connect it to a Manfrotto 241FB.

A: One end of this arm has a 1/4 thread, the other end has a 3/8 thread. Since the arm is totally symmetrical it can be mounted on either end to fit the appropriate mount.

Q: 3. Will this work with a baby pin wall plate?

A: It could be used with a baby receiver.

Q: 4. I have a dell 24" monitor and the stand is difficult to remove and the base is 6" wide. Can the monitor be inserted upside down with the stand sticking out yet still close the flap over the stand?

A: If the monitor with the stand is within 18" of height and the portion of the base that is 6" wide is not higher than about 1.5", it should fit in this way.

Q: 5. Will this Manfrotto 196AB-2 Articulated Arm support a Atomos Shogun without batteries attached? If so, does it come with the proper screws, etc to attach to my Mafrotto N8 Fluid Video Head and tripod? Thank you.

A: This arm would not be recommended. It would be better to use one of these arms. https://bhpho.to/3bxSztP

Q: 6. What tripod / dolly combination should be used with this jib?

A: Please review the following items Proaim Heavy-Duty 150mm Tripod Legs with Mid and Ground Spreaders (Silver) BH #PRPCST150 • MFR #P-CST-150 https://bhpho.to/3PAnlWc PROAIM Agile Heavy-duty Floor/Track Studio Dolly for Spiked Tripods sku:DL-0AGLE-01 contact sales special item

Q: 7. Each end has a threaded female fitting. What size are EACH of the fittings? 3/8 , 1/4 , both or one of each?

A: On one end the fitting is 3/8 and on the other end it is 1/4 .

Q: 8. Would the Manfrotto 396 be suitable to hold a 5.6 lb studio flash (specifically the Godox DP400III) including modifier (gridded reflector or snoot)? It would be mounted to a tabletop with a Manfrotto super clamp.

A: The arm is rated to 11 lbs and would be fine for that light and modifier.

Q: 9. Which one would be the best for Asus ProArt 27"? Looking for the best fit...

A: The Arco LCD Transport Case for 27-32" Displays would be appropriate for a 27" display.

Q: 10. I have connected the arm to the tripod head. The tripod head is NOT removable. Unfortunately, it has a quick release plate and the weight of the camera (attached to the arm) causes this part to lift out of the tripod and threatens to break. What do you suggest I do to attach the camera arm securely to the tripod? Thank you.

A: Clamp it to a leg or the center shaft. Given the weight you need a real sturdy tripod.