Samsung Led Series 3 Monitor Power Cable

Led Science Series 6 Battery Pack Kit

Product Code: ga20622
Availability: In Stock

$417.00 $646.35

Qty

6 reviews Write a review

Description
Reviews (6)

The Series 6 Battery Pack Kit was put together by LED Science to provide a DC power source for all Series 6 Accubeam on-camera LED lights. The kit includes a 3,500mAh NiMH battery, multi-voltage charger, power cable and a nylon bag with shoulder strap to transport and store it all. The run time for a Series 6 light is six hours at full power and eight hours at the commonly used 1/2 power setting.

3,500mAh NiMH Battery Universal Charger Power Cable Shoulder Bag with Strap

Parameters
Power	NiMH battery: 3,500 mAh
Compatibility	LED Science Series 6 lights
Run Time	6.0 Hours @ full power, 8.0 hours @ 1/2 power
Dimensions	Kit: approximately 6.5 x 3.5 x 2.0" (16.5 x 9.0 x 5.0 cm)
Weight	Battery: approximately 3.0 lb (1.36 kg)
Packaging Info
Package Weight	3.235 lb
Box Dimensions (LxWxH)	9.85 x 5.45 x 3.25"

NiMH (Nickel Metal-Hydride) provides 3,500mAh

Will operate your Series 6 LED light for 6 hours at full power or 8 hours at half power

Safe and reliable

Nylon case with adjustable shoulder strap

Uses industry standard center positive 2.5mm DC Plugs

Has a MCU control to electronically detect when the battery is fully charged

The red LED will automatically turn green when the battery is charged and the

1,000 milliamp charging current will electronically switch to a 200 milliamp holding current

Related Questions and Answers

Q: 1. Hey the picture in the product gallery says 4000mAph, but in the description says 5800mAph, whats is the real spec?

A: My battery says it is 5870 milliamp hours.Gene W.

Q: 2. What type of mounting clip do I need for this bulb?

A: You can find a variety of mounting adapters on the product page for the Quasar Science Crossfade X Linear Bi-Color LED Light (US, 2') (QU9212302), under the Accessories tab and the Mounting Adapters sub-tab.

Q: 3. Does this work on a Sony fs 7?

A: Don't think so. I use it on my EX1 so I can't say for sure.

Q: 4. Which cable do I need to power it on? Do you have a link?

A: Laird Digital Cinema Neutrik TRUE1 powerCon to NEMA5-15P 20A Power Input AC Cable (10'BH #LATR1ACIN010 https://www.bhphotovideo.com/c/search?q=%20True1%20AC%20power%20Cord&sts=ma

Q: 5. Any photometrics available?

A: While the manufacturer does not list any photometrics, they do list this panel as being the equivalent of 300 watts in terms of light output and having a CRI of 90+.

Q: 6. how heavy is the fixture with battery?

A: 2.3 pounds including metal frame, cloth filter, and battery (the battery is 1.3 pounds) there is a .3 pound carry handle for the frame

Q: 7. Does it work in Europe with 50hz 230 V ?

A: Unfortunately, this is only compatible with 120VAC.

Q: 8. Will the 12 volt Powertap out work with the D-Tap power cable of the Zylight Newz LED On-Camera Light BH #ZYNEWZLEDLT?

A: Yes, since the Zylight Newz LED takes 5 to 20 VDC, a 12V D-tap cable will work.

Q: 9. can i use it for print matching?

A: This light would have a cooler color temperature than what is recommended for print matching, therefore it would not be as ideal to use it for this purpose. The GTI PDV-1e/SW Professional Desktop Viewer B&H # GTPDV1ESW would be a more suitable option if your prints are smaller.

Q: 10. Can this run off batteries?

A: I have two Bescor FM-256 LED Lght mats. There is a battery designed to power two units but I have not purchased the battery yet. I have used the two LED units with AC power in my home and have been pleased with the convenience and quality of the light. Low cost and no frills. The availability of the battery was a reason I purchased these units.

Scott	04/09/2024
everyone needs these in their kit 5

Joshua	26/08/2024
This light is Mind-blowing for the price! Worth every dollar! 5

Troy	19/08/2024
I needed a small cordless (battery powered tube kit for special situations. Great and Pow! B & H delivers much more than just the product 5

Zack	17/07/2024
Working great so far! 5

Kevin	07/06/2024
These fit the larger tubes, T12, 1/2 diameter. These are great brackets. They mount with 10-32 machine screws and nuts. The bracket has a molded-in pocket to hold the nut while you tighten the machine screw, cutting down on the number of hands you need to install these. They have little numbs and holes molded into them too, to line them up with each other if you want to mount mnore than one tube right next to each other. These do NOT fit the Quasar Science Q30 T8 Dimmable 5600K Linear LED Lamp (4'). Make sure you order the correct size bracket for the tube you have. This came in a set of two (2), which is what you need to mount one (1) LED tube. 5