Monitor an indoor or outdoor area with the IB9369-F2 2MP Network Bullet Camera from Vivotek. This unit uses a 1/3.1" progressive scan CMOS sensor to capture 1920 x 1080 resolution video at 30 fps. An IR LED provides up to 98' of night vision. The camera's 2.8mm fixed lens delivers a 118° horizontal field of view. A memory card slot accepts microSD/SDHC/SDXC cards up to 1TB (available separately). Integrated PoE technology simplifies connectivity by enabling the transfer of power and data through a single cable.

This camera complies with ONVIF profiles G, S, and T, making it compatible with a wide range of surveillance devices. It is housed in an IP66- and IK10-rated enclosure for outdoor use in areas at risk of vandalism.

1920 x 1080 Resolution at 30 fps    IR LED for Night Vision up to 98'    2.8mm Fixed Lens    118° Horizontal Field of View    Supports microSD Cards up to 1TB    RJ45 Ethernet with PoE Technology    Complies with ONVIF Profiles G, S & T    IP66 Rated for Outdoor Use    IK10-Rated Vandal Resistance

Multimedia SoC CPU

Smart IR

Removable IR cut filter enables day and night functionality

ePTZ with 18x digital zoom

90° tilt range

180° rotation

H.265, H.264, and MJPEG video codecs

Smart Stream III optimizes bandwidth efficiency

Dual streaming

Wide dynamic range

59 dB S/N ratio

Image settings include; video title and time stamp overlay, video orientation (flip, mirror, rotation), day/night settings, illuminators, anti-overexposure, white balance, image adjustment (brightness, contrast, saturation, sharpness, gamma curve), defog, 3D-DNR, exposure, BLC, HLC, exposure control (exposure level, exposure time, gain control), AE speed adjustment, WDR, privacy mask, scheduled profile settings, and pixel calculator

Five-window video motion detection, people detection, and time filter

Event triggers include; camera tampering detection, manual trigger, motion detection, periodic trigger, recording notification, microSD card life expectancy, and system boot

Signed firmware security

100M RJ45 Ethernet

Compatible with Windows 10, 8 & 7, macOS 10.12 (Chrome only), Internet Explorer 10 & 11, Chrome 58 or higher, VLC 1.1.11 or higher, VAST VMS, Shepherd, and VADP package

Live viewing for up to ten clients

System power and status LED indicators

CE, FCC, RCM, VCCI, UL, CB, BIS, and BSMI certified

Related Questions and Answers

Q: 1. The Boundary Microphone: I have a delightful number of Shure MX 391/O Boundary Microphones. If I use an adaptor, would I be able to use that microphone with the Zoom F2?

A: If you used an adapter that provided phantom power yes. The Zoom will not provide the power needed for you mics.

Q: 2. Will this fit Nikon d750?

A: Sadly there is no location to screw this into the shutter button on the D750.

Q: 3. can the tripod collar be removed?

A: No, the tripod collar and/or tripod foot on the FUJIFILM XF 200mm f/2 OIS WR Lens with XF 1.4x TC F2 WR Teleconverter Kit, B&H # FU2002WRS, is not removable. You may rotate the tripod collar on the lens, but it cannot be removed.

Q: 4. would this be able to record off a dj soundboard?

A: The Zoom F2 Ultracompact Portable Field Recorder is intended for use with a microphone for recording mic level signal. A mixer's output signal is line level. In order to connect a mixer to the input of the F2, you will need to use adapters as well as a line-to-mic attenuator. Since the F2 has a locking 3.5mm TRS input, you can use the Sennheiser CL-1 Cable (B&H # SECL1), which has a locking 3.5mm TRS male connector on one side and a standard non-locking 3.5mm TRS male connector on the other side. Then, you can attach a coupler like the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter (B&H # HOASMFSMF). Since many DJ mixers have RCA output, you can use the Sescom Attenuating Line to Mic Level Cable - TRS Male to Male RCA, 18" (B&H # SES43DBMZ2P), which has a built-in attenuator to convert the line level signal from the mixer to mic level while also providing connections to the mixer's RCA output.

Q: 5. Fujifilm Fujinon XF 200mm f/2 OIS WR Lens With 1.4X XF TC F2 WR Teleconverter For X-Mount work on xt3

A: Yes this lens can take a Fuji X-Mount Teleconverter and it will in fact work on a Fuji X-T3

Q: 6. Will this fit on Nikon FM?

A: Yes, it will.

Q: 7. I already have the 50-140 with the teleconverter. Any thoughts on how to justify buying this lens as well?

A: The FUJIFILM XF 200mm f/2 R LM OIS WR Lens with XF 1.4x TC F2 WR Teleconverter Kit has a longer focal length and wider aperture than the 50-140mm f2.8 lens.

Q: 8. Will the Fuji 2X teleconverter (which I already have with the 100-400) work with this lens?

A: Yes, the FUJIFILM XF 2x TC WR Teleconverter would be compatible for use with the FUJIFILM XF 200mm f/2 OIS WR Lens.

Q: 9. Can the included UV lens be used for taking shots of the sun? Like the upcoming eclipse?

A: No, the UV lens that comes with th FUJIFILM XF 200mm f/2 R LM OIS WR Lens with XF 1.4x TC F2 WR Teleconverter and UV Filter Kit cannot be used for the solar eclipse, it is only used to protect the lens from scratches and other damage. Try: https://bhpho.to/3Ef2DYv

Q: 10. Will this fit on FM2?

A: No, unfortunately it will not. You would want a threaded soft release button that screws into the shutter release thread.