Take the strain of your camera's weight off your shoulders and arms and transfer it to your back with the Basic Flowline Stabilizing Support Vest with 180° Rotation from FLYCAM. Ideal for any handheld camerawork, this support vest is compatible with gimbals and camera rigs from 6.6 to 16.5 lb. A suspension line with a maximum length of 60" threads through a top bar measuring 22" and is capable of rotating 180° to execute pivoting and tracking shots with ease.

The suspension line's additional point of contact reduces vibrations to keep your handheld shots steady and smooth. Its tension can be adjusted with the knob positioned on the back of the vest, and the camera's position along the top bar can be adjusted forward or backward for better balance. The apparatus collapses down to 23.6" to fit in an included carrying case for portability.

Reduces Strain on Arms, Neck & Shoulders    6.6 to 16.5 lb Load Capacity    22" Top Bar with 180° Rotation    Adjustable Line Length, 22" Maximum    Vest Fits Variety of Body Sizes    Carrying Case

Camera hook compatible with most camera and gimbal setups

6.6 to 16.5 lb load capacity

Tightening knobs to adjust line length and camera positioning along the top bar

Line extends to 60" fully stretched

Top bar rotates 180°

Adjustable waist strap made of breathable material

Related Questions and Answers

Q: 1. Hello! My camera is a Blackmajick 6G2 , my cage for my camera is TILTA cage handle I want to buy this support bar and I would like to know if the can fit very well

A: Yes, the FLYCAM Flowline's lockable camera hook can attach to any handle and will fit on your setup.

Q: 2. is it suitable to use it with a camera setup less than 6.6 Ib ?

A: No, the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will not work effectively with cameras/camera rigs that weight less than 6.6lbs.

Q: 3. That's can fit for a Blackmagic 6K G2 with Tilta Cage ! Lens sigma and matebox tilta 4x4?

A: Yes the Flycam Flowline Master Stabilizing Support Vest for Camera Gimbals would be appropriate for a Blackmagic 6K G2 Camera rig if the entire rig weighs between 8.82 to 26.46 lb / 4 to 12 kg. It would also need a sturdy top handle on the rig, for the Flowline clamp to connect to.

Q: 4. Does it support RS 3 Pro with Blackmajick 6KG2 and TILTA cage ??

A: Yes, the FLYCAM Flowline Starter Support Vest and Spring Arm can support an RS3 Pro, Blackmagic 6KG2, and Tilta Cage.

Q: 5. Is it possible to mount a camera rig that is lighter than 33 lbs? Will there be any problems in doing so?

A: It will not work properly. These systems are designed on load capacity and are specific to that capacity. The camera rig will need to be between 33 to 41.9 pounds.

Q: 6. Hi, I want to replace the clamp with a more solid option. Any recommendations?

A: We are not aware of any other "clamps" that would work with this product. These are especially designed to work fluidly and with the weight specifications defined. Any changes to that layout would alter the operation of the unit.

Q: 7. Is there an option for 30" inches or less of waist?

A: The FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) is only recommended for persons with a waist size of 34.3-55.9" (87-142cm). However, you may want to consider the FLYCAM Galaxy Arm and Vest Stabilizer (B&H# FLGLXYAV) as it can fit on waists 28-60" (71-152cm): https://bhpho.to/35eLb8w

Q: 8. Is it possible to lock the support arm so that I wouldn't be moving?

A: On this device the hook may be locked at the end of the support arm.

Q: 9. difference with this https://www.bhphotovideo.com/c/product/1483097-REG/flycam_flcm_fln_mstr_flowline_master_stabilizing_body.html the arm is more short?

A: Yes, the major difference is that this item, the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) has a 13" (33cm) top bar with a 5" (12.7cm) extension whereas the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals (B&H# FLCMFLNMSTR) has a 17" (43cm) top bar with a 5.5" (14cm) extension.

Q: 10. Belt or waist size is about 34" inches minimum at stays in specs. My waist is about 31" inches. Would I be losing a tight fit?

A: Yes, The minimum waist size is 34" for the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals the fit would be very loose with your waist size.