Take the strain of your camera's weight off your shoulders and arms and transfer it to your back with the Basic Flowline Stabilizing Support Vest with 180° Rotation from FLYCAM. Ideal for any handheld camerawork, this support vest is compatible with gimbals and camera rigs from 6.6 to 16.5 lb. A suspension line with a maximum length of 60" threads through a top bar measuring 22" and is capable of rotating 180° to execute pivoting and tracking shots with ease.

The suspension line's additional point of contact reduces vibrations to keep your handheld shots steady and smooth. Its tension can be adjusted with the knob positioned on the back of the vest, and the camera's position along the top bar can be adjusted forward or backward for better balance. The apparatus collapses down to 23.6" to fit in an included carrying case for portability.

Reduces Strain on Arms, Neck & Shoulders    Interchangeable Tension Springs    Vest with 6.6 to 16.5 lb Load Capacity    High-to-Low Adjustable Spring Tension    22" Top Bar with 180-Degree Rotation    Isolates Vibration    Vest Fits Variety of Body Sizes    Compatible with Most Cameras & Gimbals    Included Storage Case

Camera hook compatible with most camera and gimbal setups

6.6 to 16.5 lb load capacity

Tightening knobs to adjust line length and camera positioning along the top bar

Line extends to 60" fully stretched

Top bar rotates 180°

Adjustable waist strap made of breathable material

Related Questions and Answers

Q: 1. Belt or waist size is about 34" inches minimum at stays in specs. My waist is about 31" inches. Would I be losing a tight fit?

A: Yes, The minimum waist size is 34" for the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals the fit would be very loose with your waist size.

Q: 2. difference with this https://www.bhphotovideo.com/c/product/1483097-REG/flycam_flcm_fln_mstr_flowline_master_stabilizing_body.html the arm is more short?

A: Yes, the major difference is that this item, the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) has a 13" (33cm) top bar with a 5" (12.7cm) extension whereas the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals (B&H# FLCMFLNMSTR) has a 17" (43cm) top bar with a 5.5" (14cm) extension.

Q: 3. is it suitable to use it with a camera setup less than 6.6 Ib ?

A: No, the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will not work effectively with cameras/camera rigs that weight less than 6.6lbs.

Q: 4. hi...will the placid arm work as an stabylizer? thanks

A: Yes it will. The FLYCAM Flowline Placid Two-Axis Spring Arm. It is well suited to help create smooth walking or running shots, the Flowline Placid supports cameras and rigs from 11 to 44 pounds and works to help minimize both vertical and side-to-side vibration.

Q: 5. Would this work on a Movi pro ?

A: Yes, the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals can clamp the FREEFLY MōVI Pro Essentials Bundle, but the arm length on the FLYCAM doesn't protrude enough to distance the gimbal from the body to make it that comfortable of an operating experience.

Q: 6. Does it support RS 3 Pro with FX3?

A: Yes, the FLYCAM Flowline Steady Camera Support Vest can support a DJI RS3 Pro and Sony FX3.

Q: 7. Height Adjustment up and down

A: The line of the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will allow you to lower the payload you are working with to ground level. The line is tensioned and will retract.

Q: 8. That's can fit for a Blackmagic 6K G2 with Tilta Cage ! Lens sigma and matebox tilta 4x4?

A: Yes the Flycam Flowline Master Stabilizing Support Vest for Camera Gimbals would be appropriate for a Blackmagic 6K G2 Camera rig if the entire rig weighs between 8.82 to 26.46 lb / 4 to 12 kg. It would also need a sturdy top handle on the rig, for the Flowline clamp to connect to.

Q: 9. Is this the FLCM-FLN-MSTR-03 version ?

A: The Flowline Master 2 Professional Support Vest for Cameras & Gimbals, is MFR SKU: FLCM-FLN-MSTR-02. For FLCM-FLN-MSTR-03, please see the following link: https://bhpho.to/3yeh243

Q: 10. Hi! is the placid arm included in this kit for 797? thanks!

A: Oh yes, the FLYCAM Flowline Starter Support Vest and Spring Arm for Camera and Gimbals (B&H# FLCMFLNPA01) comes with the FLYCAM Flowline Placid Two-Axis Spring Arm (B&H# FLCMFLNPLA) and also with the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation (B&H# FLBFLCMFLN01).