This 7-stop, 95mm Vaxis VFX IRND Filter for Tilta Mirage Matte Box offers true color reproduction with no loss of sharpness, darkening the entire image to allow for creative choices with aperture for depth of field and shutter speed for capturing movement. Its full spectrum coverage features a 99.8% cutoff rate for infrared ultraviolet light. The drop-in style VFX 95mm IRND filter is made of K95 optical glass with double-sided 12-layer coating and weighs just 1 ounce.

2.1 Optical Density    Double-Sided 12-Layer Coverage    K95 Optical Glass    Full Spectrum Coverage    Lightweight at 1 oz

Related Questions and Answers

Q: 1. Will this support 4x4 filters?

A: I just tried a 4x4 filter and it technically fit, but it doesn't cover the whole area so it only works at roughly the full-frame equivalent of 35mm and longer. And even then, there could be issues. There's a little dimple on the adapter rings so you can't just move the matte box/filter closer to the lens.

Q: 2. Can you use 77mm circular filters with this matte box? (I'm concerned about the double reflection when a 4x5.65 filter is used). Thank you.

A: Yes you can but it may still result in double reflections. it depends on the type of filter the coating and the position of light sources.

Q: 3. can I use it with my Canon EF 50mm f/1.4 USM and a step up ring?

A: Yes, one can use a step-up ring on the Canon EF 50mm f/1.4 USM Lens to adapt to the Tiltaing Mini Matte Box. An alternative is purchasing the Tilta 58mm Adapter Ring for Mini Clamp-On Matte Box. See link below: https://bhpho.to/3hVvIwT

Q: 4. Should I buy something else to fit it to the cage ?

A: There are many alternative matte boxes but the Tiltaing Mini Matte Box is a very portable matte box option that does not interfere with camera cages.

Q: 5. Would this matte box fit on the Sigma T1.5 FF High-speed prime cine lenses?

A: Most of the lenses in that series will work. However, there are a few wide angle lenses that have an outer diameter larger than 95mm. If the outer diameter is larger than 95mm, it will not be compatible with the Tiltaing Mini Matte Box.

Q: 6. Is this Adapter Ring for Lenses with an 80mm Outer Diameter compatible with this mattebox? https://www.bhphotovideo.com/c/product/1580292-REG

A: Yes, this adapter ring is compatible with the Tilta Mini Mattebox.

Q: 7. Can it be mounted on rods?

A: Yes there is a 15mm Single Rod Clamp that comes with the Tiltaing Mini Matte Box.

Q: 8. Would there be a problem using this Matte Box on the Sony fe16-35mm zoom lens? There is a small inner barrel extention at the 16mm end of the zoom range... would the weight of the Matte Box potetially cause damage to the zoom barrel? Thanks

A: There should be no issues using this with either the Sony 16-35mm F/2.8 or F/4. The F/2.8 has an 82mm filter thread and the F4 has a 72mm thread, which are both adapters that come in the box with this product.

Q: 9. Will this work on the Canon RF 24-70 2.0 Lens?

A: The Tiltaing Mini Matte Box (B&H# TIMBT15) will not fit on the f/2 aperture Canon RF 28-70mm f/2 L USM Lens (B&H# CA28702LRF) -- not to be confused with the f/2.8 aperture Canon RF 24-70mm f/2.8 L IS USM Lens (B&H# CA2470RF) with which it can be used -- because it cannot accept a lens with a filter thread over 82mm.

Q: 10. Is it possible to have a variable ND filter in front of the lens and behind the mattebox? Perhaps using adapters and/or step up and down rings

A: Yes it is possible. You will have to consider the size of the lens, the filter and the matte box adapter rings.