Power your Obsidian Pro 360 VR camera using batteries with this Dual V-Mount Battery Enclosure from Kandao. The enclosure fits two standard V-mount batteries to provide long-lasting power to the camera without the need for mains power. Any V-mount battery can be installed into the enclosure, and it requires two batteries to be installed to power the camera. For example, two separately available 135Wh V-mount batteries could run the camera for up to two hours. A cable is included to connect the unit to the camera.

Power Obsidian Pro Camera with Batteries    Enclosure for 2 x V-Mount Batteries    Fits Any V-Mount Battery    Requires 2 x Batteries for Usage    Power Connector Cable Included

Obsidian Pro VR camera

Two standard V-mount batteries

Related Questions and Answers

Q: 1. How I can mount this plate on a Ronin M and use it with a regular v-mount battery? Can someone recommend me mounting options how to mount this plate to a ROnon M? Any adapters available? I was looking at GyroVu V-Mount Battery Carbon Fiber Mount & D-Tap to LP-E6 Adapter Cable for Ronin M/MX, MoVI B&H # IDPV257 but I don't see this GyroVu plate from the back and don't know if there any possibility to mount it on the 25mm Ronin M tube?Thank you

A: Please look at our Gimbal Battery Bracket as a solution for this setup.

Q: 2. The product photo shows IDX. Is this the same item as BH#IDPV2?

A: IDX does make this plate for Wooden Camera, but it is not the same product as BH#IDPV2. IDPV2 has a single D-Tap connection, this plate has a two D-Tap connections.

Q: 3. Would this work with Hedbox NPF97 mounted on the SmallRig 3204 to power my Blackmagic Pocket 4K and Portkey PT6 monitor?

A: The Nanlite 15V Dual NP-F Battery Adapter with V-Mount has not been tested in this specific situation. But it should work with Hedbox NPF97 mounted on the SmallRig 3204 to power my Blackmagic Pocket 4K and Portkey PT6 monitor.

Q: 4. What light is this suitable for? Will it work with PavoTube 30C?

A: This is for the Nanlite Forza 60/60B lamp heads. For the Pavotube 30C, you may use the Nanlite D-Tap to 5.5mm Male DC Barrel Power Cable, BH # NACBDTDC which connects to any V-mount or Gold Mount battery that has a D-Tap connection. https://bhpho.to/30pooEi

Q: 5. Does the plate have enough clearance if you use in tandem with IDX 98 BP-U batteries?

A: This is for one V mount battery.

Q: 6. Does this camera support external trigger?

A: Yes. The The Kandao Obsidian Pro 12K 3D 360 Cinematic VR Camera with 16TB SSD Kit connects to the Kandao Obsidian Pro and App through Wi-Fi to achieve remote access and external triggers.

Q: 7. Hi! I need to power my new BMPCC 4k. Would it work along with this d tap cable and have no issues with power intensity? https://www.bhphotovideo.com/c/product/1448814-REG/lanparte_bmpcc_dtap_bmpcc_4k_d_tap_12v.html

A: Yes that is correct. It can operate on the battery voltage range without regulation.

Q: 8. Is this identical to this - a href= http://www.bhphotovideo.com/c/product/730636-REG/IDX_P_V257_P_V257_Endura_V_Mount_Plate.html target= _blank http://www.bhphotovideo.com/c/product/730636-REG/IDX_P_V257_P_V257_Endura_V_Mount_Plate.html?/a

A: No, the WC plate doesn't have that switch you can see in the side view that regulates the voltage for different devices. The WC plate is unregulated, but I personally have never used or needed a P-tap device that didn't work with standard v-mount battery voltage ranges. The WC plate is cheaper, but it depends if you need to regulate power or not.

Q: 9. Does it come with the cable to plug to the camera?

A: Yes, the cable is included.

Q: 10. Does this plate connect to and power the Blackmagic Ursa Mini Pro G2?

A: The proper Wooden Camera battery plate for this application is this model: https://bhpho.to/36sNRMp - which has a dedicated Molex connector for the BM camera.