Integrate any of the Fujinon Premista cine-style lenses into your ENG, broadcast, multicamera, and remote head workflows with the Chrosziel Full Servo Drive for Fujinon Premista Zoom Lenses Mount the hand control on your lens and gain ENG-like control over your zoom, with full servo control of the lens' focus and iris as well. The servo drive unit incorporates three precise cine motors that engage the lens gears on either of the three Premista zoom lenses you mount it on. This avoids the need for support rods and individual motor brackets and adjustments.

A built-in zoom rocker gives you the ENG feel you are used to working with, while the servo unit also incorporates all the connections you need to use it with a broadcast-style digital focus, iris, and zoom demands, such as the Chrosziel Magnum wireless FIZ unit (not included). A 20-pin Hirose connector allows you to use this with remote heads or robotic camera applications. The unit also passes Cooke /i and Zeiss eXtended data, useful with VR and AR production.

Standard Broadcast Controls    3 x Internal Cine Drive Motors    Electronic Engage/Disengage    Passes Cooke /i and Zeiss eXtended Data

• Demand input focus (analog/digital 16-bit)
• Demand input zoom (analog/digital 16-bit)
• Standard Fujinon Digipower control protocols
• External power recommended for maximum performance
• /i and eXtended data pass-thru

Related Questions and Answers

Q: 1. Can I use this with my Angenieux 30-90mm and control it through a Blackmagic ATEM 4M/E Switcher software?

A: If the interface can work with a Canon CineServo or Fujinon Cabrio the MSU-1 will work. The MSU-1 has a standard 20 Pin interface.

Q: 2. Usable from E mount AND X mount Fujinon MK ?

A: This products allows you to change the native E-Mount on the Fujinon MK 18-55mm and 50-135mm lenses, B&H # FUMKSET, to an MFT mount. With this product you remove the E-Mount on that lens and replace it with MFT. It is not for X-Mount.

Q: 3. What are the filter threads for this lens? If there are any?

A: The Fujinon Premista 19-45mm T2.9 Large-Format Cine Lens (PL) does not have filter threads. The front of the lens is designed to work with 114mm Mattebox solutions. Example Matte Box https://bhpho.to/3upODYc

Q: 4. Will this work on my Angenieux Optimo Style 16-40?

A: Sorry, no. The Angenieux MSU-1 Universal Cine Servo with 3 Motors with Built-In Wireless Module B&H # ANMSU1 can only work with the new EZ line of Angenieux lenses. See the following link. https://bhpho.to/2nOmlBs

Q: 5. Between this les and the canon 70mm to 200 servo lens which one handles low lighting better at full zoom ?

A: The Fujinon LA16X8BRM-XB1A 2/3" 4K Lens with Servo for Blackmagic URSA Broadcast would be better in low light settings as the aperture will be able to open up to a f/2.8 when zoomed all the way in, where as the Canon CN-E 70-200mm has a constant aperture of f/4.

Q: 6. Sometimes extenders/teleconverters allow APS-C lenses to be used on full-frame cameras. Does this extender, combined with an adapter, allow the S35 Alura lenses to cover FF sensors and thus be used on FF cameras?

A: While it may increase the area of coverage, no, the ARRI Alura LDS Extender 1.4x Lens for ARRI/Fujinon Alura Zoom Lenses & More (B&H# ARAE1.4XLDS) does not effectively allow an APS-C (Super 35) lens to cover a full frame image sensor with a high quality image circle.

Q: 7. Can I use this lens with the URSA MINI 4.6K? With B4 adapter? Thanks!

A: Yes you can however there are notable drawbacks to doing this. This lens is not designed to cover a Super35mm sensor therefore If you attempt to use this lens in the 4K recording modes it will create a large vignette on the image. The only way to avoid the vignette is to use the HD crop mode.

Q: 8. I have the E-Mount version. How could I change it to L mount? if Micro 4/3 Mount for Fuji MK Lens available why not to L mount? Micro 4/3 Flange focal distance 19.25 mm L mount Flange focal distance 20 mm

A: We are not aware of an option to check the E-mount lenses to L-Mount. This is only available to change to MFT mount.

Q: 9. Can I connect this via LBUS to Arri cameras/RIA-1 to make use of the run/stop feature?

A: The Angenieux MSU-1 Universal Cine Servo with 3 Motors & Wireless Module for EZ-1/EZ-2 Lenses (B&H# ANMSU1) does allow for start/stop, and the ARRI Radio Interface Adapter RIA-1 Set (B&H# ARRIA1S) does offer start/stop control. However, no cable is included for making a connection to the 4-pin LBUS port on the RIA-1.

Q: 10. Is this alura 1.4 X extender comparable with Zeiss lwz 3 21-100 mm t/2.9-3.9 lens

A: no this will not be compatible with the Zeiss Light weight zoom