The KLX-RX500 Chainable DVI/VGA KVM Receiver from Smart-AVI receives DVI/VGA, KVM, and IR signals up to 500' via LAN. It is designed for use with the KLX-TX500 Transmitter. You can set up you own extension cabling or utilize the pre-existing LAN infrastructure you have access to.

The KLX-RX500 Receiver compresses data to utilize Cat5e/6 cables, but you will see no degradation of signal when using one Gigabit Internet connections and up. When utilizing pre-existing LAN connections, implementing a one Gigabit switch allows for full resolution extension. If you use smaller bandwidth, you will experience compressed signals, if you choose to forgo the additional switch.

With no software or driver required, you can easily extend DVI/VGA, KVM, and IR signals. The KLX-RX500 Receiver supports USB emulation and Full HD 1080p video at 60 Hz, and can be controlled with an IR remote control (not included). The receiver is a compact unit that is suitable for use in pre-configured work environments.

Receives KVM signals up to 500' feet via LAN (CAT5e/6 cables)

Chainable for thousands of feet of extension

Supports DVI and VGA monitors

Supports full USB emulation

Audio input and output

Dual control operation with both local and remote use of KVM

Supports high resolution Full HD 1080p up to 1920 x 1080 resolution at 60 Hz

Can be controlled with an IR remote control (not included)

Plug-and-play ready

No software or driver required

Related Questions and Answers

Q: 1. Does this monitor have a stand for table top?

A: The package comes with a table stand.

Q: 2. Will this play one input like a blue ray player to output 4 displays is this how this devise works?

A: This product from Smart-AVI is both a Video Wall Controller and a Matrix Switcher. It has 4 inputs and 4 outputs. When used as a Video Wall you can set it so one of the inputs is split across 4 screens set up as a 2x2 Video Wall. As a Matrix Switcher you can assign any input to go to any output. Since this product is HDCP compliant it will work with a Blu-Ray Player as well.

Q: 3. Hi, does the Smart AVI need a PC to run alongside it? Or is it self contained?

A: This system is basically a PC in a black box and does not require connection to another computer. It will operate and stand alone.

Q: 4. Can I rotate the image on the top two TVs through this switch? I installed the top two TVs upside down.

A: The Smart-AVI 4K-Wall Video Wall Controller and Matrix does not support image flip or rotation.

Q: 5. Will this support a USB common access card (Smart card) reader?

A: You should be able to power a access card. You will need to make sure the extender is being powered.

Q: 6. Do these monitors accept an outgoing SDI signal?

A: Hello WOA. I apologize for the confusion- Despite the 16:9 ratio, these units do not support SDI input or output, just Composite, VGA and DVI. Thank you!

Q: 7. installation?

A: IOGEAR says: The GCS42UW6 is a plug and play KVM . For help with installation please call support at 866-946-4327. Thank you for choosing IOGEAR

Q: 8. i have 4 55 inch nec screens do i need to buy for players?

A: This could very well be the right solution for you. Feel free to call or e-mail us with your particular model monitors and configuration and application. Sales@bandh.com or 800.606.6969 / 212.444.6615

Q: 9. I'm trying to move my cable box to a closet in another room. would like to install a IR remote eye to my tv in order to have no cable wires showing. is that possible?

A: This item may or may not work with your cable box. So that we may find a solution for you, please email us. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 10. Will this support an older Mac Cinema display being driven by a 13 Macbook Pro?

A: yes