The HKM-Pro 3-Port HDMI KVM Switch from Smart-AVI allows the user to control three computers using a single monitor, USB keyboard & mouse, and stereo speakers / headset. The output section for the user features an HDMI port, two USB 2.0 type A ports (for keyboard and mouse), two USB 3.0 type A ports, a stereo audio jack, and a mic jack. It also offers an MHL 1.1 port to connect compatible Android smartphones. Each of the three input sections features an HDMI port, a USB 3.0 type B port, a stereo audio input jack, and a microphone jack.

This KVM switch supports hotkey switching, which makes it easy to switch between computers. In addition, emulation of keyboard and mouse functions allow connected computers to boot normally without keyboard error. The HKM-Pro 3-Port HDMI KVM Switch comes with a power supply, an HDMI-to-micro USB cable for MHL function, and two sets of USB 3.0, HDMI, and Audio Cables.

KVM operation, with HDMI inputs and USB 3.0 ports

HDMI 1.4a with 1080p HD video

MHL 1.1 for compatible Android smartphones

Supports DDC/DDC2B, hot-plug detection (HPD) and HDCP functions

Supports default EDID and select EDID modes

Supports hotkey switching

Full USB keyboard and mouse emulation

Firmware upgradeable

Easy to install, no software required

Related Questions and Answers

Q: 1. Are the auxiliary cables necessary for the input devices sound? It should accept sound from inputs through HDMI, right?

A: Yes, the IOGEAR 2-Port 4K Dual View HDMI KVMP Switch with USB Hub and Audio can accept audio via HDMI.

Q: 2. Can the RS-232 control and infrared control be used at the same time? I have experienced matrix switches where you start entering your from and to with infrared, and when a command comes in on RS232 it resets the infrared command and you have to start over.

A: The RS-232 and the IR can be controlled at the same time on the HDR-8x8-Plus.

Q: 3. Is this compatible with DP 1.4?

A: The IOGEAR 2-Port 4K Dual View DisplayPort KVMP Switch with USB 3.0 Hub and Audio supports DP 1.2.

Q: 4. Would I be able to use this KVM switch to have audio playing out my studio monitors? I use the scarlett 2i2 interface to connect to a pc via USB. Would it be possible to connect both PC towers to the KVM switch and use the same Scarlett USB audio interface to switch playback for the studio (audio) monitors from each pc tower?

A: While the Focusrite Scarlett 2i2 2x2 USB Audio Interface could be connected to multiple PCs using the IOGEAR 2-Port 4K Dual View DisplayPort KVMP Switch with USB 3.0 Hub and Audio, it would not be able to serve as an audio source for two separate software programs running on two PCs at the same time. It could be used with software on one PC and then, if that software is closed or the Scarlett is disconnected from it, could be used again with another software on a separate PC.

Q: 5. Is this KVM compatible with G-Sync?

A: IOGEAR says: Thank you for choosing IOGEAR. The GCS1932 is not compatible with G-Sync .

Q: 6. Is the IOGEAR 2-Port DisplayPort 1.2 KVM Switch (GCS1932) compatible with two Dell U2413 monitors in series?

A: Yes, this would work with 2 Dell U2413 monitors.

Q: 7. is this hdcp 2.2 compliant?

A: Yes, this model would be hdcp 2.2 compliant.

Q: 8. I wants use for dual monitor from single laptop its possible to use it ?

A: That will not work for what you are trying to archive.If you already have a monitor connected and need to add a second one the easiest way to do that is by using an external graphic card like https://a href= http://www.bhphotovideo.com/c/product/945143-REG/startech_usb32hde_usb_3_to_hdmi_dvi.html target= _blank www.bhphotovideo.com/c/product/945143-REG/startech_usb32hde_usb_3_to_hdmi_dvi.html/a

Q: 9. Is the 4th hdmi a true video port? I have one sun that needs to keep it's keyboard, but video would be fine switched though kvm

A: The 4th port is for a MHL device like a compatible smartphone, or tablet.

Q: 10. Is this device rack-mountable?

A: Yes, the Smart-AVI HDR-8X8-PLUS-S 4K 8x8 HDMI Matrix Switch with IR Remote is rack-mountable.