The IFBlue IFBR1C is a compact, single-channel bodypack IFB receiver compatible with transmitters available from Lectrosonics including the IFBT4 or any Digital Hybrid Wireless transmitter in IFB-compatibility mode. It provides simplicity and flexibility in a tough package that is intuitive for untrained users to operate. The receiver is ideal for talent cueing and crew communications, or for directors who need to monitor program audio in broadcast and motion picture production.

The IFBR1C features a rugged, injection-molded ABS housing that's comfortable to wear and easy to conceal. It runs up to twelve hours on two rechargeable AA NiMh batteries (included). The unit's LED indicator changes color from green to red as the battery voltage declines to provide plenty of warning before operation ceases. Up to four IFBR1C can be simultaneously dock-charged with the companion CHSIFBR1C battery charging station (available separately).

The receiver's 3.5mm output drives a wide variety of earbuds, headphones, and induction neck loops—with loads from 16 to 600 ohms—at substantial levels. Monaural earpieces are automatically accommodated with no loss of audio output or battery life. The output jack is also the receiver's antenna input, with the earphone cord acting as the antenna.

A single power/volume knob and intuitive controls with a backlit LCD screen keep operation simple. 10 presets are available, allowing you to store frequencies in memory for quick setup on set. The included wire belt clip makes it easy to secure the receiver on a wide variety of belts, pockets, and fabrics.

In spite of its tiny size, the cost-efficient IFBR1C offers excellent performance on par with all Lectrosonics IFB products.

IFB Monitoring for Talent and Crew    Works with Lectrosonics IFB Transmitters    Works with Lectrosonics Digital Hybrid    Use with Earbuds, Headphones, Neck Loops    Compact Design, One-Knob Operation    12 Hours on Rechargeable AA Batteries    Dock-Chargeable    Stores up to 10 Frequency Presets    Rugged Injection-Molded ABS Housing    LCD Interface for Programming/Operation

• The IFBR1C uses ±20 kHz FM deviation for efficient use of the bandwidth. The compandor noise-reduction circuitry delivers an excellent signal-to-noise ratio. A supersonic Pilot Tone signal controls the audio output squelch to keep the receiver silent when no transmitter signal is received. The incoming RF signal is filtered and amplified, then mixed down to the IF frequency using a microprocessor-controlled synthesizer.
• The receiver's high-sensitivity design provides extended operating range both indoors and outdoors.

• The IFBR1C provides simple, one-knob operation for on/off and audio level, and easy, on-the-fly programming with fast frequency adjustments. Basic operation is simply a matter of rotating the knob to turn power on and adjust the volume level.
• On the side panel, membrane switches and a backlit LCD interface let you quickly select frequencies and save/recall presets.

• There are 10 presets available for programming the IFBR1C. The stored frequencies remain in memory during power Off and even with the battery removed. Use the Up and Down arrows to scroll through the previously selected frequencies stored in the IFBR1C and quickly change frequencies for quick communication.

• USB port for firmware updates.
• Attached battery door.
• Battery life: 10 hours (Alkaline), 12 hours (NiMh), 20 hours and 40 minutes (Lithium).
• Side contacts allow for recharging the NiMh batteries without removing them from the the IFBR1C—requires the optional CHSIFBR1C battery charging station (works with NiMh batteries only).

Related Questions and Answers

Q: 1. Is this compatible with mx5500 keyboard?

A: Hello, no this is not compatible with the MX5500. That keyboard uses a USB Bluetooth mini receiver that we no longer make. -Danielle from Logitech

Q: 2. Will work with Manfrotto 055XPROB?Thank's

A: Yes. It should work fine.

Q: 3. Will spiked tripod feet work if they have the manfroto rubber shoes on them?

A: This is a universal dolly that can fit with a wide variety of tripods. It is geared more towards round feet though.

Q: 4. Is there a recommended bag that will fit the Dolly with the Track wheels installed?

A: ShooTools Dolly 360 Carrying Bag BH #SH81030076 • MFR #SH81030076. May be a bit large but it is a good option to consider.

Q: 5. how do i know which tripods are compatible with this device ?

A: Pretty much any tripod with out the metal dual spike, if it is round and flat your ok, if they have a spike but you can spin the rubber part over it then it will work. I would also invest in a 5 pound sand bag it will keep your track and tripod more stable and not so bouncy

Q: 6. does this come with a track?

A: No, this kit contains the tripod roller bracket and the track wheels. I also bought a section of their rubber track but you could use various items to ride on (like PVC or even larger diameter garden hose if rigid enough).

Q: 7. This compatible with Kessler K-Flex Dolly Track?

A: Yes

Q: 8. will this work with flexible curving track?

A: The Glide Gear SYL-960 is not designed to work with Flexible track. The Track option for this dolly is BH #GLSYL101. An idea for a Flex track model is Dolly B&H # DIOD and Track B&H # DIODFWS.

Q: 9. Can the track wheels ride on 3/4 PVC pipe?

A: I have not tried it, but i think might work as long as the wheels fit on it. This dolly works really good. I reccomend using the track from the same glide gear products, as it is strong and can bu used on not leveled ground.

Q: 10. Is there an idle arm for this product?

A: There is not.