Extend the monitor away from the body of your Sony FX6 or FS5 cinema camera with this 15mm LCD Extension Mount from Niceyrig. The durable aluminum mount attaches to the 8T connector on your camera using a thumbscrew, and it features a 15mm rod that mounts your monitor up to 1.5" away from the camera body. The rod also features an M12 thread on the end so you can add an optional 15mm threaded rod and connector screw to extend it further. The mount can support a monitor weighing up to 4.4 lb.

Extend LCD Display 1.5" from FX6/FS5    Mounts onto Sony 8T LCD Mount    Mount Your LCD onto 15mm Rod    4.4 lb Load Capacity    15mm Rod Has M12 Threads on End    Durable Aluminum Construction

Sony FX6 and PXW-FS5 cinema cameras with LCD

Compatible with but not limited to:

M12 threaded 15mm rod

Niceyrig connector screw 085

Related Questions and Answers

Q: 1. Can you use this with Nikon F mount 105 mm lens using FTZ adapter?

A: Hi, using two different adapters together usually causes problems--you can mount the 105mm F-mount lens to the FTZ adapter and attach it to this extension tube, but it's doubtful that it would perform optimally.

Q: 2. Does this also work with the EVA1 version Z-Finder?

A: Yes it does.

Q: 3. Will the Fotodiox extension tubes fit in front of the Sony 1.4x or 2.0x teleconverters? The opening in the Vello tubes is to restrictive.

A: I tried this combination using the Sony 90mm ƒ2.8 Macro. These extension tubes allow the Sony SEL14TC to physically mount, but the shutter and all electronic functions of the lens are disabled. In theory, the combination should work with a non-electronic macro lens. I've tested mechanical lens mount adapters with the 1.4X TC and had good results. If you do attempt this, I recommend using both tubes. The 16mm is slightly too short, causing the rubberized tip of the teleconverter to touch the baffle in the lens mount.

Q: 4. Does this come with the rods? It doesn't list them in the description but I saw that the same plate from amazon comes with them.

A: The Tilta Battery Plate for Sony FX6 Type II (BH #TIEST20BTP2V • MFR #ES-T20-BTP2-V) does not come with rods.

Q: 5. Can this item power a Panasonic BGH1?

A: The Wooden Camera WC Pro V-Mount for Sony FS7/FS5 & Panasonic EVA1 (B&H# WO261000) is not designed for use with the DC port of the Panasonic Lumix BGH1 Box Cinema Camera (B&H# PADCBGH1) and we do not recommend it. Rather, use a Sony L-series battery directly in the camera's battery plate or a dummy battery connected to a V-mount battery plate (with a V-mount battery), if desired.

Q: 6. Does this work with the FX6 Z-Finder? Do the screws line up?

A: Yes, the Mounting Bracket attaches to either the Sony adapter or any 15mm rod.

Q: 7. Does the aperture control work with the $44.95 fotodiox extension tubes?

A: Yes it does, but as the previous answer indicates, attaching the are very clumsy.

Q: 8. Hi there! Are these tubes weather sealed? Thanks!

A: They are not weather sealed.

Q: 9. Hi, I lost a thumb screw for this, Can you please tell me what screw/product would I purchase as a replacement please? Thanks

A: The thumb screws on the Tilta Battery Plate for Sony FX6 Type II (V-Mount) are M3 (6mm) screws.

Q: 10. Can this power Sony PXW Z190 ?

A: There is no support information saying this plate with the Sony PXW Z190.