Dust, crush, and waterproof, this graphite 950 Wheeled Hard Case from Nanuk has a 51.9L capacity to protect your equipment during travel. A durable and secure transport and shipping solution for your sensitive and valuable gear, it comes with a padded divider insert plus an egg crate foam lid insert. Eight small and two large non-marking, nylon-covered polyurethane dividers have touch fasteners so you can adjust them to best suit your needs.

The case is made from UV-protected NK-7 resin for resistance to impacts, extreme temperatures, discoloration, and material degradation over time. The patented PowerClaw latching system uses compressive force to keep the case securely closed until you open it. The integrated slide locks further prevent the case from accidentally opening, even if dropped, and accept user-supplied padlocks for added security. Carry the case using the folding soft-grip handle or roll it with the retractable pull handle.

NK-7 UV-Protected Resin Case    2 PowerClaw Latches    IP67-Rated Dust and Waterproof    Impact Resistant and Crushproof    Automatic Pressure Release Valve    Integrated Lid Stay for Easy Access    Stackable with Same-Size Cases    Retractable Pull Handle & Wheels    Egg Crate Lid Foam    Padded Divider Insert

• UV-protected NK-7 resin resists discoloration and material degradation
• Interior measures 20.5 x 15.3 x 10.1"
• Lid depth: 2.1"
• Base depth: 8"
• IP67-rated dust and waterproof
• Submersible to 3.3' for up to 30 minutes
• Buoyant up to 110 lb maximum total weight
• Broad operating temperature of -20 to 140°F
• ATA 300 tested to be crushproof and impact resistant
• Automatic pressure release valve prevents vacuum caused by changes in altitude and geographic location

• Egg crate foam lid insert
• Case insert with adjustable dividers
• Eight small and two large adjustable dividers
• Dividers made of nylon-covered polyurethane foam
• Dividers held in place with touch fasteners for easy removal and positioning

• Soft-grip folding carry handle
• Retractable pull handle
• Polyurethane wheels

• Accepts user-supplied padlocks
• Patented PowerClaw latches with slide locks
• Corrosion-resistant stainless steel hardware

Related Questions and Answers

Q: 1. will Contax Zeiss Lenses fit into this case?

A: The pre cut hard foam on the Nanuk 918 Case with Foam Insert for Set of Six Lenses (Black)will fit lenses with 100mm diameter. The length is adjustable. you can fit lenses upto 140mm long.

Q: 2. Would Zeiss CP.3 lenses fit in here?

A: Yes. While they may be slightly snug, the ZEISS Compact Prime CP.3 Lenses should fit inside the Nanuk 918 6-Lens Case with Foam Insert.

Q: 3. How deep is the 4" section of the hole? Is the lower section exactly 3"? Would a 3.15" lens be able to squeeze in?

A: The pre-cut foam dimensions included with Nanuk 918 6-Lens Case are 6.5 x 9 x 10.5 inches. each lens cavity has 2 removable foam disc to fit long or short lenses. The first session is 2 inches deep. the first foam disc is 1.5'' tall and the second disk towards the bottom of the insert is 2.5 inchees tall. If you remove all foam disk the insert would reach a 6 inche depth. The width of the insert on the top section is 4 inchess, the botton sections is only 3 inches. I wouldnt't recommend this inserts if your lens circumference is winder then the insert because of the pressure you'll be putting on your lenses.

Q: 4. Will this fit Canon 5D Mark III With battery grip?

A: Yes, the 5Diii with grip will fit in the 935 case.

Q: 5. Can this fir the Sirui Night Walker cine lenses?

A: Yes, the Nanuk 918 Hard Case with Foam Insert for Six Lenses (Black, 20.L) will fit the Sirui Night Walker Cine Lens series. The lens dimensions are 79mm wide, and 85.4mm tall. The lenses inserts on the pre cut foam that comes with the case are 103mm wide by 113mm long.

Q: 6. Can you tell me if this will hold a set of Rokinon Cine DS lenses? ( 16, 24, 35, 50, 85, 135mm).

A: Yes this case can hold those Rokinon lenses.

Q: 7. Can the Meike ff cine prime lenses PL mount fit in ?

A: Yes, the Meike Full-Frame Cine Prime PL-mount lenses will fit in the Nanuk 918 6-Lens Case with Foam Insert (Black).

Q: 8. Is this case going to accommodate DZO Arles lenses?

A: The Nanuk 918 Hard Case with Foam Insert for Six Lenses (Yellow, 21L) would not be a good choice for the DZOFilm Arles lenses. The DZOFilm Hard Case for Arles 5-Lens Set, BH #DZOCASEAP5, would be recommended to use with the Arles series of lenses.

Q: 9. Would the Canon EF 70-200 f/2.8 fit there? Its length is 8.5 inches, but I read that 24-105 f/4 would be the largest, which is much smaller ...

A: The Canon EF 70-200mm f/2.8L IS USM lens would be just a bit too long to fit this case.

Q: 10. Does this case come with customizable foam?

A: The Nanuk 918 Case (Black) does not come with customizable foam