Use this Power Supply from Lumens to provide continuous power to any Lumens PTZ camera. The adapter's power cable plugs into a wall outlet and provides 12V power to the camera via its coax connector.

Powers All Lumens PTZ Cameras    Standard AC Input    12V Output    Coax Camera Power Connector

Related Questions and Answers

Q: 1. Would this be reliable long-term to be powered on 24/7?

A: The Blackmagic Design Micro Converter SDI to HDMI 3G can be used for continuous long-term operations.

Q: 2. Is there a P-tap/D-tap power option for this? I see a few cables out there, but I don't know if any of them work.

A: You could use something like the regulated Kondor Blue D-Tap to USB-C Power Delivery Cable for Mirrorless Cameras to power the Blackmagic Design Micro Converter BiDirectional SDI/HDMI 12G with Power Supply.

Q: 3. Can this be powered off of a Cat5 to USB C converter where the Cat5 has PoE?

A: The Blackmagic Design Micro Converter SDI to HDMI 3G (with Power Supply) can be powered with USB-C that has at least 5V.

Q: 4. I have a CPU that outputs in HDMI, I then am taking it to a SDI input on a newtek 3play system. Will the conversion work HDMI to SDI?

A: No it will not. The Blackmagic Design Micro Converter SDI to HDMI 3G (with Power Supply) is the opposite of what you are looking to do. It takes a video signal from an SDI source and converts it to HDMI. You need a converter that will convert an HDMI source to SDI.

Q: 5. Does this come with a USB-C cable for power?

A: This SKU does not come with a power supply or cable. The Blackmagic Design Micro Converter SDI to HDMI 3G with Power Supply (BH #BLCMCSH3WPSU • MFR #CONVCMIC/SH03G/WPSU) does include a power supply with USB-C on one end and an AC plug on the other. It is not a USB-C to USB-C cable.

Q: 6. Can you use this to take an output feed from a Blackmagic Design Teranex Mini SDI 12G Distribution and use the hdmi to send it to a monitor?

A: Yes you can as long as the Teranex mini is outputting a resolution/frame rate that is supported by the micro converter.

Q: 7. I run 2K (SDI) video into this this and it converts (with power) to HDMI 1080p. Do I have this right? With that happening can I loop an SDI monitor to run video out of that as well? Is it too much data to run a 2k Alexa Classic picture through it?

A: Yes, that is right. The converter supports 2K over SDI, but not HDMI. If you feed it a 2K SDI input it'll output 1080 HD on the HDMI output. There is no processing on the SDI Loop Out so that will still be a 2K SDI output.

Q: 8. Is there a difference in performance between the regular or bidirectional micro converter in terms of latency?

A: The Blackmagic Design Micro Converter Bi-Directional SDI/HDMI 3G and the other Mini Converters have very little to no latency. They would both perform the same.

Q: 9. Will this work solely as a LUT box for calibrating a TV? I do not intend on hooking up a camera or computer to the box.

A: Yes, you can load 33-point a LUT for color calibration in a stand alone configuration when using the Blackmagic Design Micro Converter SDI to HDMI 12G with Power Supply.

Q: 10. Use this to connect tv antenna COAX cable to HDMI input on TV?

A: Yes, it should be able to convert your COAX signal into HDMI so long as the COAX has BNC style connectors and the signal it carries is NTSC or PAL, as well as DCI 2Kp60 or lower.