The TSB-110 Softbox for Taiko 2x1 LED Light from Luxli diffuses and softens the output of the Taiko 2x1 LED Light, reducing shadows and creating a warm-glow effect on subjects. It easily wraps over the panel and secures using touch-fastener straps, making setup and teardown a breeze. With the larger softbox over the Taiko's bright LEDs, the wide light dispersion provides a warm wraparound effect and eye-pleasing images.

The full-coverage diffuser easily attaches to the frame of the large softbox and offers an interior silver lining that helps disperse light output. The softbox has a metal frame that quickly pops out and collapses down. It folds flat to fit in the included carrying case.

The TSB-110 accepts the TSBG-120 Softbox Grid (available separately) to add directionality, focusing the light with a controlled beam.

Removable Front Diffuser    Silver Interior    Ripstop Nylon Fabric    Touch-Fastener Straps    Collapsible Metal Frame    Optional Fabric Grid    Includes Carrying Case

• Ripstop nylon fabric
• Sliver interior
• Flexible wraparound fit
• Removable front diffuser
• Reduces output approximately one f-stop
• Collapsible metal frame
• Includes carrying case

Accepts 40° Softbox Grid for Taiko 2x1 (available separately)

Related Questions and Answers

Q: 1. This light is rated at 3190 LUX at .9m. The GVM 560as is rated at 3800 LUX at 1m. So this Impact light produces fewer lumens than the GVM, is that correct? I have the GVM lights.

A: This Impact Forever Ready Cool 4 LED Tube Light Panel would have a lower lux rating as compared to the GVM 560AS panel.

Q: 2. Can the Taiko be connected to and the firmware updated on a Mac?

A: Yes, you can update the light's firmware on a Mac or PC.

Q: 3. Will the IndiPRO Tools Micro-Series 98Wh Li-Ion V-Mount Batteries work for the LUXLI TAIKO 2X1 RGBAW LED LIGHT? And does the light need battery plates?

A: Yes, Two IndiPRO Tools Micro-Series 98Wh Li-Ion V-Mount Batteries will give a end-user a 2hr run, we usually suggest higher WH for a better run-time to meet production needs.

Q: 4. Is there a solution to the incredibly short length of cable from the power supply to the light?

A: You may use an extension between the power supply and the light such as the HIVE LIGHTING 4-Pin XLR Extension Cable for Bee 50-C, Wasp 100-C & Hornet 200-C (M/F, 15'), BH # HIVECXLR4P15. https://bhpho.to/3yA9yaE

Q: 5. What’s the best arm to use to boom this light safely?

A: This boom arm is recommended BH #AVD600 with a 15 lb Sand bag hanging from the rear B&H # IMSBFB15

Q: 6. Does this come with a case?

A: No. The following unit does not come with a case. Please review the following item Luxli Travel Case for Taiko 2 x 1 LED Light (Black) B&H # LUORCTAIKOC MFR # ORC-TAIKO-C https://bhpho.to/3MOzPJi

Q: 7. will this work with the luxli 1x1?

A: No it's too small, We recommend Angler Collapsible Softbox for 1x1' LED Lights B&H # ANLEDSB1818

Q: 8. Is the Arri Light Intensifier for the Skypanel S60-C compatible with this?

A: Unfortunately, the Arri Light Intensifier for the Arri Skypanel S60-C is not compatible with the Luxli Taiko 2 x 1 panel. If the diffuser on the Luxli Taiko is removed, you would have 15,500 lux at 1m versus only 13, 525 lux on the Arri S60-C with the intensifier at the same working distance.

Q: 9. can the power be reduced to less than 1%? I thought the Fiddle could do .1 to .9% power

A: Yes it can however there are a couple of caveats. First: You need to connect the light to the app on a smartphone or tablet. The screen on the back will only display whole numbers therefore you need the app to set the brightness level as a decimal. Second: not all colors will support brightness levels less than 1%. for example if you set the light to daylight or tungsten color you can get all the way down to 0.1% however, if you dial in a custom color you may find that the lights will not turn on until it his a certain threshold. It could be 0.4% or 0.7% or even 1% depending on the color you choose.

Q: 10. Can the Bluetooth be turned off so that it is not transmitting/recieving any signal at all?

A: For the Luxli Fiddle Pocket RGBAW LED (Red) light, a Bluetooth pairing mode will need to be triggered to activate the Bluetooth signal, otherwise, signals should not be active.