The QLB-60 Quick Release Clamp by FLM is an open channel Arca-style lever clamp that receives different size quick release plates. It has safety pin cutouts so that plates with safety screws will not slide out of the clamp when it is loose. Two built-in bubble levels help align your camera vertically and horizontally. Large lever-actuated locking system, with one adjustable jaw that can accommodate various Arca-type plate sizes.

Arca-Type Quick Release Clamp    2x Bubble Level    Large Locking Lever    Adjustable Plate Size Capacity

Related Questions and Answers

Q: 1. Is the Sunway MAC-14 compatible with the Manfrotto befree tripod (MKBFRC4-BH)?

A: The Sunwayfoto Arca & Manfrotto Compatible Clamp is compatible with the head on the Manfrotto Befree Tripods. You would attach it to the tripod head's quick release plate do you could use Arca-type plates.

Q: 2. Is there a way to adjust the friction tension? If I were to release the tension to reposition what prevents moving?

A: The FLM 47GX Centerball Tripod Head with SRB-40 QR Clamp has a friction tension knob. You can adjust the friction tension by tightening or loosening the friction tension knob. If you open the friction tension knob all the way, the main ball adjustment knob will be the only knob that will prevent the head from moving.

Q: 3. I have a 3265 Manfrotto ballhead and want to convert into arca swiss system, what do I need? Will Sunwayfoto Arca & Manfrotto Compatible Clamp fit? Thank you

A: You can screw your existing plate to the bottom of this clamp and then you can use it. Keep in mind having a qr stacked upon qr might reduce stability.

Q: 4. Will this clamp modify a FLM CB-32 head to have a Quick Disconnect system?

A: Hi,Yes it will, but you should observe that the safety pin is for FLM plates and not necessarily compatible with other Area-Swiss plates. I own a RSS L-plate for the Oly OM-D E-MII and the pin is annoying. Perhaps the pin could be knocked out. You could also consider a RSS QR instead. Google that combination. Either way you should apply a locking glue to keep it securely in place. FLM has a guide for that.

Q: 5. Can I use this to convert a non-arca compatible tripod such as the Sunpak Ultra 7000TM by attaching this on top of the QR plate on the Sunpak?

A: Yes, you can but it is not ideal, attaching a quick release on top of another quick release maybe creating more problems than its worth.

Q: 6. Is able to hold Manfrotto RC2 plate ?

A: As the RC2 is not Arca-compatible, it will not work with the FLM QLB-80 Quick Release Clamp.

Q: 7. Where can you get the small notched pin that goes under the Arca Swiss plate? It did not come with my plate.

A: I'm sorry but we don't carry pins for plates separately. You will have to purchase a plate that already has pins attached.

Q: 8. Which of Manfrotto's many Quick Release systems does this support? RC2, RC4 etc. I want something that will allow me to use my Arca Swiss-style camera and lens plates with a Manfrotto pan & tilt, or gear heads. Is this it?

A: No, Manfrotto doesn't have arca swiss-style quick release plates. You will have to buy an adapter

Q: 9. Will this mount to a Sachtler Sideload Plate S/Ace Tripod QR Plate (BH #SAWPDV1)? If so, does the retaining pin engage underneath the Sunwayfoto MAC-14 to prevent rotation?

A: Yes. This can be attached to that plate. It has a 3/8"-16 threaded hole with a 1/4"-20 bushing adapter to thread onto the plate. The Register Pin on the Sachtler would reduce rotation.

Q: 10. How wide is the clamp in its narrowest dimension? i.e., what are the dimensions of the clamping surfaces?

A: The FLM SRB-40 QR Clamp measures 56mm x 38mm (excluding the knob). The fixed side of the jaw of the Arca-compatible clamp is 38mm long and the adjustable side of the jaw is 32mm long.