The stone blue Synco P2L is a miniature, digital wireless microphone system offering an easy-to-use, cost-effective, and all-inclusive solution for recording two on-camera personalities to an iPhone or iPad equipped with a Lightning port. It delivers considerably improved sound quality compared to the built-in mics on your iPhone, supplying clear, intelligible speech for shooting videos on Instagram, YouTube, and TikTok or for live streaming and online meetings.

The P2L includes two tiny, lightweight clip-on transmitters, each with its own built-in omnidirectional microphone, along with a compact dual-channel receiver featuring a Lightning connector that plugs directly into your iPhone. A 3.5mm jack on the receiver lets you plug in headphones for monitoring while you're recording. The requisite USB charging cable for the transmitters is included as well as a charging case with a built-in battery that allows you to store and recharge your components.

The system uses a Syncoder Encrypted Transmission Algorithm (FHSS) transmission scheme to ensure reliable operation with clear sound at a line-of-sight distance up to 492'. The transmitters' built-in rechargeable batteries provide up to 5 hours of operation and recharge via the USB Type-C ports. The dual-channel receiver is powered by your iPhone and needs no battery to operate. When the receiver is plugged into your phone, the receiver's USB Type-C port allows you to recharge your phone while in use, allowing you to record for numerous hours on a USB power pack or indefinitely, if you have access to AC.

For Podcast, Vlog, Streaming, Meetings    2 Tiny Clip-On Transmitter/Microphones    1 Tiny Plug-In Receiver (Lightning)    Easy to Use, Automatic Pairing    9 Voice Effects    DSP Noise Cancellation    5-Hour Rechargeable Battery + USB Power    Charging Case with Cable Included    492' Range Line-of-Sight

• The transmitters can be clipped on clothing without having to wire yourself or your talent, providing a fast, truly wireless setup.
• DSP noise-cancelling technology provides clearer audio.

• The super-compact and lightweight dual-channel receiver is equipped with a Lightning connector for direct mounting on your iPhone.
• A USB port on the receiver allows you to power your iPhone while in operation for virtually unlimited shooting time.

• The transmitters and receiver come pre-paired from the factory. Just turn on your system and you're ready to go!
• The receiver and the transmitters have LEDs that indicate power, battery life, and pairing status.
• Each transmitter is powered for up to 5 hours via a built-in rechargeable battery.
• The battery recharges in 1.5 hours; a charging case and cable are included.
• For single-person shoots, you can use both transmitters and the charging case to get up to 15 hours of shooting time.

• If your iPhone doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.

• The transmitter features a microphone Voice Changer function that offers nine creative voice effects.

• To avoid interference from TV and radio waves, the P2L digital system operates in the 2.4 GHz frequency band—far away from television, radio, and UHF wireless microphone transmissions.
• The system automatically changes transmission frequency to mitigate noise and dropouts at a line-of-sight distance of up to 492 feet or up to 164 feet when some obstacles are present.
• For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.

Related Questions and Answers

Q: 1. Assuming this would work with an iPhone using a lightning to 3.5mm converter? thanks!

A: Yes, you can use this wireless system with any iPhone, using the Apple adapter cable: https://www.bhphotovideo.com/c/product/1280795-REG/apple_mmx62am_a_lightning_to_3_5mm_headphone.html

Q: 2. hi there! Does anyone know what exactly comes in the box? Are there lab mics included? Thanks:)

A: Yes lavalier mics are included. You can find the full list of items listed in the 'In The Box' section of the product page, located on your far right-hand side of the Overview Tab. 2 x Transmitters (TX) Receiver (RX) 2 x Lavalier Microphones 2 x Microphone Wind Muffs 3.5mm TRS to TRS Output Cable 3.5mm TRS to TRRS Output Cable for Smartphones USB Type-C Charging Cable Limited 1-Year Warranty

Q: 3. Hello, are these work with Samsong galaxy not or not?

A: Yes, the Synco WAir-G1-A1 Ultracompact Digital Wireless Microphone System for Mirrorless/DSLR Cameras will work with the Samsung Galaxy Note line of smartphones. Use the included 3.5mm TRS to TRRS Output Cable for Smartphones and a TRRS to USB-C adapter such as BH #BOBYK9: https://bhpho.to/3rf0ztz

Q: 4. Does it need some sort of phantom power can I plug it into a mixer or sound system without it?

A: The Synco WAir-G2-A1 Ultracompact Digital Wireless Microphone System for Mirrorless/DSLR Cameras (2.4 GHz) operates on its own battery power. Phantom power or plug-in power from the mic input is not required. The rechargeable battery is built in, and a charging cable is included in the box.

Q: 5. I know theres a new one coming with the screen that would show levels and battery level. I think it will be the same but does this have a way to mute one?

A: No, the Synco WAir-G1-A2 transmitters do not have a mute switch to mute the audio while the wireless system is in use.

Q: 6. Can I use that mic with iPhone?

A: Yes, you can use the Blink 500 Pro wireless mic system with an iPhone. The system includes two receiver outputs cables for cameras and mobile devices. Use the 3.5mm TRS to TRRS cable combined with a Lightning adapter like the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) which will convert the TRRS plug to Lightning and allow the receiver to connect with your iPhone.

Q: 7. Would you recommend this cable to use when both mics are being used? If so, would the audio be mixed together or will they be on separate channels? B&H #HOHMX003Y

A: You have the option to switch between mono or stereo on the receiver: Recording in mono combines both microphones on both the left and right side of your audio track. Recording in stereo puts one person on the left and the other person on the right, allowing you to isolate each person's dialog and adjust each level individually later in post.

Q: 8. How can you charge the motor if it uses a D-TAP male as the end of the charging cable?

A: The D-tap port of a battery recognizes the cable and will output power through the cable to the motor.

Q: 9. With the right connector does this work well with newer iPhones?

A: Yes, the Synco WAir-G1-A2 wireless microphone system is compatible for use with newer iPhones. Use the included 3.5mm TRS to 3.5mm TRRS receiver output cable with an Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) attached to the TRRS end and it will work well to record audio with your iPhone.

Q: 10. Is it possible to set up the record function with a BMPCC 4K?

A: No the CAME-TV Astral 2.4 GHz Wireless Follow Focus System does not seem to support the Black Magic Pocket 4k camera. However the Tilta NANO II does support start stop recording with the Black Magic Pocket 4k. Tilta Nucleus Nano II FIZ Wireless Lens Control System BH #TIWLCT05