With the TP-Link TL-FC311B-20 Gigabit WDM Media Converter, you can convert between Gigabit Ethernet RJ45 electrical signals and optical signals through a Gigabit SC fiber port. Designed to support long-distance video surveillance and other data transmissions, the TL-FC311B-20 has a range of up to 12.4 miles over a 9/125µm single-mode fiber cable while using up to 328' long Cat 5/5e Ethernet cables with the RJ45 port. The TL-FC311B-20 transmits at a frequency wavelength of 1310nm and receives data at 1550nm, which complements the TP-Link TL-FC311A-20 WDM Media Converter. Half- and full-duplex modes are automatically negotiated.

1 x Gigabit SC Fiber Port    1 x Gigabit RJ45 Port    1310nm TX / 1550nm RX Wavelength    Up to 12.4-Mile Range    Auto-Negotiation of Half- / Full-Duplex    Supports 9/125µm Single-Mode Fiber    Supports Cat 5/5e Ethernet Cables

Related Questions and Answers

Q: 1. Would I'll be able to connect to my Fujifilm xt30 ll camera?

A: You could from the camera connect to a smart phone and from the phone use bluetooth to print. You need the phone in between to tell the printer which image to print.

Q: 2. Can I extend the range of Cat6 cable using some kind of signal amplifier or i will be always limited to 70m max?

A: When outputting over Cat6 cable from the Blackmagic Design Studio Converter, the maximum supported cable run would be 100m or 328 feet.

Q: 3. How many TP-4R lights does this hold?

A: The Godox TP-S4 Softbox for KNOWLED TP4R Tube Light BH #GOTPS4 holds 2 TP-S4 lights.

Q: 4. on nikon f lenses, do i use the lens aperture ring of the adapter ring? if the adapter, do i set the lens wide open? tks, /guy

A: If the lens that you have has a manual aperture ring, for controlling it on the adapter, set the aperture to A. However if you want to control the aperture on the lens you can.

Q: 5. Will this work with a 24-120 G lens?

A: If you are referring to the Nikon AF-S NIKKOR 24-120mm f/4G ED VR Lens, yes, you may use the Nikon AF-S NIKKOR 24-120mm f/4G ED VR Lens on the FotodioX Pro Lens Mount Adapter for Nikon G-Type F-Mount Lens to Leica T/SL/TL-Mount Camera. Do note that this is a manual adapter and does not support electronic communication with the camera body. As such, you will have to focus the lens manually and you will have to set the aperture using the aperture ring built into the lens adapter.

Q: 6. Are you able to print any photo from your camera roll ?

A: Yes the FUJIFILM INSTAX MINI LINK 2 Smartphone Printer can print any photo from a smartphone.

Q: 7. Can 1 transmitter connect to 2 or more receivers at the same time?

A: No, the Shimbol TP Mini 600' HDMI Wireless Video Transmission System's transmitter can only transmit to a single receiver.

Q: 8. What it my light such as the amaran p60c or x has a female 1/4 20 on the bottom? Do I need a male 1/4 20 to female 1/20 pin?

A: The Amaran P60C has 1/4 female input on the light, in order to use Impact TL-SA Umbrella Tilt Adapter you will need https://www.bhphotovideo.com/c/product/1646302-REG/camvate_c2704_light_stand_mount_with.html or equivalent.

Q: 9. I am looking at integrating this with the BMD studio Pro camera over ethernet. The video tour and other documentation state that everything can be communicated via Cat6 ethernet. How does the "talkback" ethernet port out of this converter integrate into an intercom? What box would it plug into? Thanks!

A: As per Blackmagic Design: Cat6A or higher would need to be connected to camera. The Talkback RJ-45 outputs balanced analog audio to the camera headset system. It will connect to a 4-wire interface on the intercom.

Q: 10. Which filter color, black or silver looks best on this lens?

A: A silver ring filter would be a better match for the Leica APO-Macro-Elmarit-TL 60mm f/2.8 ASPH. Lens .