The SHAPE Half Cage with Wooden Handle protects your Sony FX3 camera while extending its mounting capabilities with a cold shoe, seven 3/8"-16 threads, and multiple 1/4"-20 threads, enabling versatile customization of your run-and-gun setup for field applications with additional monitors or microphones. An ARRI rosette on the left side of the cage allows you to attach the included adjustable wooden handle to the rig for a more ergonomic handgrip. To ensure unencumbered operation, the cage's design maintains access to the camera's controls and ports.

Attaching the factory handle of your camera is easy, thanks to the top plate's threaded ARRI hole patterns. An included HDMI protector can be secured to the camera to prevent damage to your cable or connector port. Fitting the cage to a quick release plate or DELTA adapter increases compatibility to tripods or shoulder mounts for further stabilization in the field.

Aluminum Half Cage for Sony FX3    Two 360° Rotating Handles    Comfort-Padded 15mm Mount Shoulder Pad    Removable Back Pad    Two 18" 15mm Rods    Swing-Away Matte Box System    Follow Focus Wheel with Crank and Whip    1/4"-20 and 3/8"-16 Threads    ARRI Rosette for Accessories

Related Questions and Answers

Q: 1. Does this fit a Lumix S5?

A: The form factor of the Panasonic Lumix GH4 is very different of the S5 body, so the YELANGU C500 Camera Cage with Matte Box and Follow Focus will not be able to fit the Panasonic Lumix S5.

Q: 2. What accesories do I need to mount a Bestview S7 7" On-Camera Monitor (BH #BES7-MFR #S7) in this cage?

A: An articulating arm such as the Pearstone 7.5" Articulating Arm (PEAA42), would work well for attaching a monitor while utilizing on of the cage's 1/4-20 screw holes to mount it. This arm can be mounted with a removable shoe mount or can be mounted with 1 of 2 1/4-20 screw heads.

Q: 3. Will this accommodate a Sony A7rIV?

A: This will not accommodate an A7R IV.

Q: 4. Is this model a better fit for the FS7 than the SHAPE FS5 shoulder rig?

A: Hello Nickolas,Thank you for your question! Actually, this unit was designed to fit the Canon C200, as its title says. If you're looking for a similar unit to fit the Sony FS7, we recommend you take a look at our FS7 lightweight plate. a href= https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs7-camera-supports/sony-fs7-lightweight-plate_585.aspx?id_page_parent=1181 target= _blank https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs7-camera-supports/sony-fs7-lightweight-plate_585.aspx?id_page_parent=1181/aFrom this baseplate, you can easily combine the same accessories to end up with a shoulder rig. Our lightweight baseplate was designed to respect the camera's optical center for the FS7. Which will not be the case with the unit you're asking about. We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 5. Will this fit the Sony A6500? If not which follow focus with matt box and camera cage alt works best for SonyA6500? Thanks so mu

A: Yes, the YELANGU C200 Camera Cage with Matte Box & Follow Focus for DSLR/Small Cameras will fit the Sony a6500 Mirrorless Camera.

Q: 6. Hi. Can I use it with a Sony a6300? Is it compatible?

A: Yes, this is a universal system for smaller mirrorless cameras. It will work well with the Sony A6300.

Q: 7. does this work with the c100?

A: No. It is specifically designed for the C200.

Q: 8. Will this work with a Sony A7Sii?

A: It will not as the Sony A7SII uses a different battery over the A7RIII and A7III. Instead you will need BH #SHBXNPF which is the same kit, only with the proper dummy battery for the A7SII. https://bhpho.to/2w8AUcq

Q: 9. Will this cage/shoulder mount/matte box etc. with the Sony Alpha a7R IV?

A: The A7R IV will have a slightly different design than past models. It will not fit properly in the cage.

Q: 10. could my Canon 6D fit in this cage?

A: We're afraid not. This is a form fitting cage specific to the A7RIII and A7III cameras, it will not work with a 6D. Instead we suggest you look at building a system around the SHAPE DSLR Kirk Neff Baseplate + Cage 2.0, B&H # SHDSLRKN20, which is a Universal Cage that will work with the Canon 6D. https://bhpho.to/2RGnZbl