Designed with a short length, a large objective, and a wide zoom range, EOTech's 5-25x50 Vudu Precision Riflescope is an ideal optic for your mid- to long-range hunting and shooting needs that gives you precise shot placement with the room to stack it with thermal and NV devices on your rail. The combination of exceptional glass and optical coatings ensures views remain bright and clear, with sharp contrast, accurate color transmission, and crisp clarity at all powers and in any light condition. Its MOA-based first focal plane reticle is optimized for shooting at all distances and is complemented by 1/4 MOA impact point correction and wide adjustment ranges on both turrets.

First Focal Plane Reticle Placement    Partial Red Illumination with 10 Levels    34mm Diameter 1-Piece Maintube    1/4 MOA Impact Point Correction    100 MOA Elevation, 80 MOA Windage    Locking Elevation Turret with Zero Stop    Anodized Aluminum Construction    AR-Coated XC High-Density Glass    Nitrogen-Filled, Water and Fogproof

• Wide and powerful 5-25x zoom magnification is ideally suited for long-range shooting and hunting
• Large 50mm objective lens provides the light-gathering capacity required to keep views crisp and bright when viewing the smallest targets at extreme distances on maximum magnification; it also keeps views bright in challenging light conditions such as during the pre-dawn and late-dusk hours when game is most active
• XC High-Density glass delivers clarity, resolution, and contrast
• Broadband anti-reflection coatings for better image brightness, clarity, and detail
• 23.3-foot field of view at 100 yards on 5x; 4.7 feet on 25x

• First focal plane placement is ideal for long-range precision hunting and shooting. The reticle size changes in proportion to the magnification and maintains consistent subtensions throughout the zoom range
• Modified crosshair reticle optimized for long range use
• Simple illuminated center aiming dot is easy to see in all light conditions without covering small targets
• Short posts on outside horizontal axis
• Long thin hairs on horizontal and lower vertical axes ensures small and/or distant targets won't be obstructed
• Stadia lines on hairs improve shot accuracy by providing aiming points at various distances and for providing wind corrections
• Upper half of view left completely open for maximum view
• 10 brightness levels ensure the aiming point can be seen in bright daylight or in challenging light
• Automatically enters "sleep mode" after 2 hours of inactivity
• Runs on one included CR2032 coin cell battery

• Throw lever of power adjustments makes transitioning between magnifications easy and precise
• Exposed EZ-Clik tactical turrets allow easy and fast adjustments in the field
• Elevation turret has a push/pull locking system and the EZ-Chek zero stop that doesn't require you to take your gaze away from the eyepiece to return it back to zero
• Precise 1/4 MOA impact point correction
• Wide 80 MOA windage adjustment range
• Exceptional 100 MOA elevation range is optimized for long-range shooting
• Parallax adjustment for long-range use

• Short design gives you room to stack it with an NVD or thermal device in front of it
• 34mm one-piece maintube provides the room required for the wide turret adjustment range and to maximize light throughput
• Aluminum alloy housing is lightweight and strong
• Black scratch-resistant Type III hard anodized finish
• O-ring sealed and nitrogen filled for waterproof and fogproof performance
• Sunshade included to reduce lens flare and glare when the sun is close to where the scope is being aimed
• Made in Japan

Related Questions and Answers

Q: 1. Will the Century Precision Optics 0HD-55WA-SH6 work with a Cannon fx 400?

A: Hi, no that lens will not work on the Canon XF400 camera. Alternatively, I recommend the Raynox HD-6600 Pro 58mm 0.66x Wide Angle Converter Lens BH #RAHD6600P58 - https://www.bhphotovideo.com/c/product/219741-REG/Raynox_HD_6600PRO_58_HD_6600_Pro_58mm_0_66x.html. Thank you for shopping at B&H!

Q: 2. Does it work with my Century Optics 1.6x HD Telephoto Conversion Lens for Panasonic AG-HPX170/AG-HMC150?

A: You are correct, the Century Precision Optics 0VS-TCSS-00 will indeed work with the Century Precision Optics 1.6x HD.

Q: 3. will is devise check for a broken wire?

A: This multimeter can test for continuity, broken wires, and open circuits or switches.

Q: 4. Will this lens work with the Panasonic AG-DVX200?

A: Unfortunately, it is not compatible. That is because the DVX200 has a 4-tab bayonet mount and the DVX100A has a 3-tab bayonet. Schneider may be able to modify the tele to a 72mm threaded attachment. If you have this item, please contact them to see if they can do so. a href= http://www.schneideroptics.com target= _blank www.schneideroptics.com/a

Q: 5. Does this fit on Panasonics new DVX200?

A: This model is not compatible with the DVX200. Most of the 72mm thread lenses from Century will work with the exception of: OHD-75CV-72.

Q: 6. Does it fit on Panasonic AJ-PX270?

A: I only know it fits an ex3

Q: 7. Can this fit on other Sony cameras?

A: It is made for the Sony FX1 and Z1U bayonet mount. If you have a different camera you need a lens for please email a href= http://askbh@bhphoto.com target= _blank askbh@bhphoto.com/a for a recommendation.

Q: 8. Does the picture stay in focus down the zoom range

A: This is best for for shooting situations in which zooming need is minimized for this is a partial zoom adapter. It will allow zooming only from wide angle to mid-range and you must use auto focus mode. Also note: it has a bayonet mount meant for attaching it directly to the lens of the Sony HVR-Z7U and HVR-S270U.

Q: 9. Hi, I'm using Sony PMW350K, the Fujinon kit lens do the back focus digitally which can be chosen from the menu. There is no way to do it manually. Can this adapter be used ?

A: This is a tele-extender that is solid and not adjustable. You cannot adjust back focus with it.

Q: 10. Can the Sony EX-1 adapter ring be removed from this unit and the Century Precision Optics 72mm Screw-in Adapter Ring B&H # CE0FA7X7200 MFR # 0FA-7X72-00 be attached instead?

A: We have not tried this configuration and knowing what we do about the fine Century Precision product line, we would doubt this is possible. To find out for sure, we would have to contact Century Precision. Send us an email for us to do so. provideo@bhphoto.com If you do not have the lens, we would then suggest Century Precision Optics 0HD-16TC-72 1.6x Tele-Converter for Camcorders with Integrated Zoom Lenses and 72mm Thread B&H # CE0HD16TC72 as a viable substitute.