Expand your office, business, or network with fast and reliable links with the 14' Pearstone Cat 7 Double-Shielded Ethernet Patch Cable. Available with a yellow PVC jacket for easy identification, this slim yet durable commercial-grade cable features a 600 MHz transmission speed that supports 10 Gigabit Ethernet networks. Additionally, each twisted pair of bare copper conductors is shielded with an aluminum-mylar wrap while all four pairs are covered by an aluminum braid, which helps to minimize crosstalk while protecting your data transmissions against electromagnetic interference from nearby devices and electrical equipment. The gold-plated RJ45 connectors provide high conductivity and resist corrosion while the molded snagless boot design helps to prevent them from getting caught on other cables, even in dense installations.

Gold-Plated RJ45 Connectors    Double-Shielded    600 MHz Transmission Speed    10GbE Network Support    Molded Snagless Boot    PVC Jacket

The gold-plated RJ45 connectors help to ensure maximum performance while resisting corrosion, thereby extending the cable's life.

Supporting a 600 MHz transmission speed, this Cat 7 cable is ideal for 10G Ethernet networks. It is also backward compatible and using this cable with lower speed networks allows you to scale up your network when you're ready without having to replace the wiring.

This 26 AWG cable features bare copper conductors that are tightly twisted to help reduce crosstalk and minimize both RF and EM interference.

Avoid the frustration of getting your RJ45 connectors caught on other cables and objects, especially in packed rackmount installations. The Pearstone Cat7 Ethernet Patch cable has a molded boot that covers the gab, allowing you to easily unplug it from the switch.

By shielding each twisted pair with an aluminum-mylar wrap, and all four pairs with an aluminum braid, this cable helps to significantly reduce crosstalk, radio frequency, and electromagnetic emissions to deliver optimal data transfer speeds. Each connector is also shielded, providing you with protection at all points of the cable.

Related Questions and Answers

Q: 1. Minimum Elevation9.5 (241.3 mm) Is that from the screw? Is that .../ I want to use it with a macro lens. Not sure of these numbers

A: Yes, I believe it is the distance from the table to the camera mounting screw. I checked mine - it's closer to 8.75 table to screw (mine was purchased June-2014).

Q: 2. Can CF bulbs be used in these light fixtures? I don't want hot bulbs.

A: While compact fluorescent lamps can sometimes have the same threading as a tungsten flood lamp would, the base on the fluorescent lamps are much larger and would not fit the narrow opening on these sockets.

Q: 3. How do I get the copylight onto the holder that slides onto the horizontal bars? It appears the round piece should slide all the way into the round section on the edge of the copylight and then the knob secures it, but I can't get it to go past the edge of the inside hole (if that makes any sense). Thanks for your help.

A: If you are still having an assembly problem, try to completely remove the tightening nob on horizontal bar, that may give you the clearance you need. If all else fails, try getting Tech Support at Beseler You may replacement parts. Their Number is 800-237-3537

Q: 4. Is this lens compatible with Canon VIXIA HF R72 ?

A: Yes it is compatible with the 43mm threading of the Canon HFR700,70 and 72 cameras.

Q: 5. Will the Avenger's column pin fit a Matthews Turtle Base?

A: You can use a Avenger column in a Matthews Turtle base.

Q: 6. will the avenger riser fit a kupo runway base?

A: Risers for turtle base Cstands use a standard Junior pin so they are cross brand compatible It will work with a Kupo Runway base https://bhpho.to/2QtGM7S.

Q: 7. Where is best to put sandbags for a stand like this? Have only been able to find advice for c-stands not bigger stands like this

A: Placing the bag on the leg in the space between the wheel and where the brace connects is ideal. The closer you get to the wheel without interfering with its operation the better. You want to make sure the bag is hanging and is not resting on the ground.

Q: 8. what is the load capacity? Its strange not to list that.,

A: It really depends what you are attaching the riser to. It is normally part of the Avenger C stand and that supports up to 22 lbs.

Q: 9. Is this lens compatible with the Canon Vixia HV30/40? Both camcorders have a 43mm-46mm lens mount

A: Yes the Pearstone DVP-WA07-43 0.7x Wide Angle Lens Attachment is compatible with both Canon Vixia HV30 and 40 due to both having 43mm threading.

Q: 10. What types of bulbs work well or are recommended with the Beseler CS-14 Copystand Kit?

A: Suggested bulbs are shown in the Accessories tab.