Quickly extend the coverage of your home's 802.11ax Wi-Fi network by plugging the RE600X AX1800 Range Extender form TP-Link into a wall outlet near where the signal is weakest. The RE600X pairs with your TP-Link OneMesh compatible router with the touch of the WPS button to create a unified mesh network that operates using a single network ID (SSID), providing uninterrupted 4K video streaming, online gaming, and video chat experiences as you move from room to room. Use the TP-Link Tether mobile app to configure your RE600X range extender, including the strength of its Wi-Fi coverage, to suit your needs and home size.

Wi-Fi 6 (802.11ax)    Up to 1775 Mb/s Throughput    2.4 GHz / 5 GHz (Dual-Band)    2 x Internal Antennas    1 x Gigabit Ethernet Port    TP-Link OneMesh Compatible    Access Point Mode    Works with TP-Link Tether App

With its two powerful internal antennas, the RE600X transfers up to 1201 Mb/s over the 5 GHz band and 574 Mb/s over the 2.4 GHz frequency, providing a total bandwidth of up to 1775 Mb/s.

OFDMA (Orthogonal Frequency-Division Multiple Access) technology improves your wireless network with high throughput, low latency, and efficient power consumption.

The RE600X uses beamforming technology to concentrate the Wi-Fi signal toward devices to create a strong, far-reaching connection.

Connect wired devices such as computers, smart TVs, to the range extender's Gigabit Ethernet port to give it wireless connectivity.

Provide your network switch or other wired device with Wi-Fi capabilities by connecting it directly to the RE600X's Gigabit Ethernet port.

Use the Tether app to configure the RE600X's Wi-Fi coverage to maximum, intermediate, or minimum to match the size of your home.

The TP-Link Tether app for iOS and Android devices allows you to setup, manage, and monitor your RE600X range extender alongside TP-Link routers and devices.

Related Questions and Answers

Q: 1. Can I use this extender on a Canon 50D body with a 100-400mm f/4.5-5.6 IS USM lens?

A: The 1.4 Extender does fit on the 100-400mm lens.I have used it with both the 7D MKII and 5D MKIII.

Q: 2. will the 1.4 EF Extender III work with an EF 70-300mm 1:4-5.6 IS USM lens (non-L series). If not, why not. What issues are involved.

A: The Canon 1.4x EF Extender III is not designed to be used with that particular lens. Issues that arise with non recommended lenses can be that the lens physically will not mount to the teleconverter because the rear element is protruding too far or that it simply cannot function properly and will not be able to maintain features such as auto-focus.

Q: 3. Is this lens compatible with cannon T2i and EF 70-300mm F 4-5.6 IS USM lens and with autofocus?

A: This extender is not compatible with the Canon EF 70-300mm f/4-5.6 lens. For a compatible 1.4x extender, please look at the Kenko TelePlus MC4 AF 1.4X DGX Teleconverter for Canon, B&H # KE14X4DGXC.

Q: 4. Does the Canon 1.4x EF Extender III work well with the Canon EF 70-200 f/4 IS USM Lens?

A: Yes, the Canon 1.4x EF Extender III is fully compatible with the Canon EF 70-200 f/4L IS USM Lens. It would then have the appearance of a 98-280 f/5.6 lens and would still retain autofocus on all Canon EOS SLR and DSLR cameras.

Q: 5. Does this work with the Raveneye and enable the LiDAR, Raveneye,and focus motor to all work together?

A: Unfortunately, the DJI LiDAR Range Finder to Transmitter Cable Hub is not for use with the DJI Ronin RavenEye Image Transmission System for DJI Stabilizers. The DJI LiDAR Range Finder to Transmitter Cable Hub is designed for use with the DJI Transmission Combo. See the link below: https://bhpho.to/43rBHzL

Q: 6. Is this the right one for Focus Pro?

A: The DJI LiDAR Range Finder to Transmitter Cable Hub was intended to be used with the older DJI LiDAR Range Finder for RS 3 Pro, which communicated with the DJI High Bright monitor via the DJI Wireless Video Transmitter. Because the origional intention was to use the DJI Wireless Video Transmitter for those products, if you use it with the DJI Focus Pro LiDAR there may be some extra cables that you will not use since you may not be using the DJI Wireless Video Transmitter. But that being said, you could still use the DJI LiDAR Range Finder to Transmitter Cable Hub to power the DJI Focus Pro LiDAR from a d-tap power source.

Q: 7. Does this extender (ef 1.4x iii) come with a case or protective bag for when not in use? Maybe protective lens caps at least? Thanks for replies.

A: This converter comes with caps and a case.

Q: 8. What extender will work with Canon 18-200 IS lenses

A: No, the Canon 1.4x EF Extender III is not compatible with the Canon 18-200mm f/3.5-5.6 EF-S IS lens. The Canon 1.4x EF Extender III is only compatible with a small sub-set of Canon EF lenses, listed on the Compatibility Chart list under the Overview of the teleconverter listed above. http://bhpho.to/mNuEtF

Q: 9. canon 1.4 extender

A: What is the question...?

Q: 10. Will this allow me to add a lidar to a camera system that will never be on a gimbal?

A: The DJI LiDAR Range Finder to Transmitter Cable Hub is meant for integration with the RS3 and requires such for it to do its job.