Shooting in the wind with a light reflector poses many challenges when taking a position for the right light. This Wind-Resistant Collapsible Reflector from Angler is made of a silver mesh material that lets the wind pass through the fabric, allowing for a more stable light reflector on breezy days. The silver mesh surface provides maximum light reflectivity without the harshness of solid-fabric reflectors. Two easy-grip handles are ergonomically designed to make holding the reflector comfortable and easy, especially in windy conditions. Attach the reflector to a light stand or clamp with the threaded 3/8"-16 socket on either handle. This 22" reflector has a spring steel-loop frame that pops open for use, and collapses down to approximately one third its size for storage and transport.

Collapsible 22" Silver Reflector    Woven Aluminum Mesh Fabric    Windproof Woven Material    Two Easy-Grip Handles    3/8"-16 Threaded Socket for Mounting    Includes Storage Bag

• Woven material for wind pass-through
• 22" circular reflector
• Silver color produces maximum light reflections
• Two easy-grip handles
• Folding, collapsible design
• Spring steel loop frame
• 3/8"-16 threaded sockets for stand mounting
• Lightweight and portable

This woven material permits the wind to pass through the reflector and allows you to keep the light where you need it. Traditional reflectors catch wind like a boat's sail, which can cause the reflector to move and result in inconsistent lighting. This reflector can remain on the subject and capture the right light on a windy day.

The silver reflector provides maximum reflectivity and offers high contrast to your imagery. With the woven surface, the light is less intense and more pleasing than a traditional solid fabric reflector.

Two large ergonomic handles permit a better grip on the reflector than grabbing the reflective fabric, so the reflector can be easily held in position on the subject. There's an integrated 3/8"-16 mount on each easy-grip handle so that the reflector can be attached to a light stand or clamp.

The flexible steel frame folds down to 9", approximately one third of its opened size. When you take it out to use it, the spring-loaded frame pops open in a flash.

This collapsible reflector is lightweight and portable, and easily fits into the included carrying bag to keep it compact and handy for transport.

Related Questions and Answers

Q: 1. Does the Angler Grid for Collapsible LED Softboxes (LCSB-GRID) fit with the Angler Collapsible Softbox for 8x8" LED ?Light Panels (LCSB-88) ?

A: Yes it will fit.

Q: 2. Can the Impact Telescopic Collapsible Reflector Holder be easily mounted to a standard C Stand?

A: Yes it can. But I will also let you know the I've moved on from using this piece. I kind of hate it. Simply put, it has too many knobs that can come off or loosen on the road. I'm always shooting on location (everyday), I lost two knobs and bent a clip within the first couple of months. I knew that by replacing the missing pieces it would just happen again. So I purchased an Illuminating Arm instead. Less moving parts, less to worry about and hassle free.

Q: 3. Will this work on the LitePanels SnapBag?

A: Yes it will

Q: 4. Description describes backdrop can be bent into a cove for tabletop. Will this bend and damage the "wire springs" the fabric?

A: No, the Angler 5x7' collapsible background kit frame can handle lots of play and is durable.

Q: 5. Is Angler Beauty Refelctor 22 Bowen mount? I dont like extra adaptors between my Bowen mount strobe and light modifier. More attachments, more problems. I want to buy it only if it is built for Bowen mount,

A: You can purchase a Bowens mount. Very easy to use.https://a href= http://www.bhphotovideo.com/c/product/1148669-REG/angler_egd_lps_beauty_reflector_adapter_impact.html/pageID/accessory target= _blank www.bhphotovideo.com/c/product/1148669-REG/angler_egd_lps_beauty_reflector_adapter_impact.html/pageID/accessory/a

Q: 6. How do I set up with the stand? I got the backdrop open but I'm not sure how to attach it to the stand.

A: setup stand and boom arm to desired position set and slide the two pinch-clamps into position for either a horizontal or vertical backdrop installation set and forget. Would suggest a sandbag if being used outdoors.

Q: 7. Hi! Can I use it with my Canon Speed light? Also, is the diffuser sock included, or how to add it (it says optional)?

A: NO. This is a beauty dish that attaches to a standalone monolight which is entirely different than Canon Speedlight. If you wanted to attach a Speedlight, which is a small handheld portable flash that can be mounted on a camera or a special hotshoe you would need an adapter that accommodates your speeligt and has a special ring onto which the beauty dish will mount. What is and not included should be on the listing.

Q: 8. Is it the same boom as in Impact Multiboom Light Stand and Reflector Holder B&H # IMLSRH MFR # 3218? I have a light stand, can it be mounted on to the stand?

A: Yes, I use them in my studio with Impact heavy duty light stands

Q: 9. What is the beam angle that this grid achieves? 30, 40, 60? Most grids will specify this information.

A: The manufacturer does not specify a beam angle for the Angler Grid for the Collapsible Softbox for 1x1' LED Lights BH #ANLEDSBG1818.

Q: 10. Will this fit seamlessly on a Chimera Pop Bank 1x1 for Astra?

A: This grid has only been tested with the Angler Collapsible Softbox for 1 x 1 LED Lights.