Guitarists looking to expand their cabinet IRs for the TH-U SuperCabinet modeling software will be impressed with Overloud The Amp Factory TAF JACK, an IR library that extensively captures the full-sounding guitar tone of a Fuchs 1x12 with Eminence Private Jack speakers.

The TAF JACK provides the sound of the '60s and '70s, offering a softer low-mid that produces a smooth midrange. The Private Jack is great for anything organic like modulation and delays as the lack of low end makes these cut through a mix. This library features IRs systematically captured with 14 mics for over 100 total impulse responses. The mics recorded IRs in 8 positions each with two distances using a Neve 1073/VR preamps.

Quality IRs for TH-U SuperCabinet    Fuchs 1x12 Cabinet    Eminence Private Jack Speakers    14 Mics and Over 100 IRs    8 Positions Per Microphone    Captured with Neve 1073VR Preamp    Supports WAV IR File Export    Export IR WAVs for 3rd-Party Modelers    SuperCabinet IR Processor Required

SuperCabinet IR processor makes it easy to blend and create custom cabinet tones and export IRs in WAV format for use in external IR loaders and modelers. Created by Andy from TheAmpFactory in his Orangetreestudios HQ, who captured a Fuchs 1x12 with Eminence Private Jack speaker that has less low-mid volume, producing a smoother midrange, great for anything organic like modulation and delays, as the lack of low end makes these cut through the mix a lot easier.

• Graphically browse the IRs in the library
• Blend them together
• Craft new cabinet tones with the unique Multiband mode
• Use the IR in the software
• Export the IRs in WAV-file format, compatible with software IR loaders and all the major hardware modelers

The microphones used during the capture sessions for this IR library are:

• AKG C414
• Audix i5
• Beyerdynamic M160
• DPA 4011
• Electrovoice RE20
• Neumann U47
• NeumannU87
• Peluso R14
• Royer 121
• Sennheiser MD421
• ShinyBox 46MXL
• Shure 545 SD
• Shure SM7B
• Shure SM57
• Sony C800G

Every microphone has been moved to 4 different horizontal positions (Cap, Cap Edge, Cone, and Cone Edge), two distances each, for a total of 8 IRs each. All the measurements have been created with the Neve 1073/VR preamp. All IRs in the library are phase aligned, so they can be blended without phase cancellation.

Related Questions and Answers

Q: 1. Could this be used as a basic controller to operate a series of flashes in manual mode for a Fuji X-e2? Not interested in TTL capabilities, but the ability to use it as a basic controller/trigger.

A: No, that is designed to be used for Canon cameras and flashes that have the IR TTL system.

Q: 2. Does this work with the Nikon SB 28 DX?Do I have to attach anything to the Nikon Flash or does it receive signals from the remote automatically by IR out of the box?Do I understand it correctly that the unit will control my flash remotely including power control, TTL and also in Manual mode?

A: Since the Nikon SB-28DX is not compatible with the Nikon CLS system nor does it use i-TTL communication, it would not be compatible with this product. When using the product with a Nikon i-TTL compatible flash, you would need to set the flash to remote mode in order to control the power, TTL, and to use the flash in manual mode.

Q: 3. I have a Nikon D700 camera & a Nikon SB700 speed light. Will this work with this camera/flash combination?

A: I have only used on a Canon. It works as advertised.

Q: 4. Can we trigger the 470EX AI with this on a Canon R6?

A: Yes, the Vello FWIRC-C FreeWave IR TTL will drive the following units. Canon 470EX-AI Canon 600EX II-RT Canon 600EX-RT Canon EL-1 Canon MR-14EX Canon MT-24EX

Q: 5. Will this allow access to the Flash Control Menu on Nikon D500?

A: All the flash control will be done from the commander only.

Q: 6. Will this remote work with the Olympus M10 Mark IV?

A: Unfortunately, this remote is not compatible with the OM-D E-M10 Mark IV.

Q: 7. Will the "commander" function on the Canon EOS Rebel SL3?

A: This unit is not compatible with a SL3.

Q: 8. I have both a Nikon D700 & D610 DSLR cameras both using a Nikon SB700 flash. Will this work with these combinations?

A: You can use this transmitter with those cameras and flash.

Q: 9. will this work with the Canon 50D ? I also have a Canon 580EXII which I want have work with my 50D instead of my Pocket wizards

A: This flash commander can work with the Canon 50D to fire the 580EX II.

Q: 10. Does this work with nikon 7000 and sb 800 flash?

A: Yes, however if you utilize the flash control "Commander Mode" function of the D7000 you don't actually need it. Check your camera's user manual for more information.