Simultaneously stream your content to several platforms using the NDI20X NDI PoE PTZ Camera with 20x Zoom from FeelWorld. Ideal for video conferencing, live events, and houses of worship, this camera features a 1/2.9" CMOS sensor, both HDMI and 3G-SDI outputs, and audio input. NDI|HX streaming protocols and PoE (Power-over-Ethernet) are supported over a single cable, saving both cost and time.

The camera uses H.264 and H.265 compression formats and offers low-light correction and autofocus functions. You can save 10 presets using the included remote control or up to 255 presets via the WEBSERVER software.

1/2.9" 2.07MP CMOS Sensor    Simultaneous 3G-SDI, HDMI & NDI|HX Out    Supports up to 1080p60 Video    20x Optical Zoom, 3.3 to 54.7° FOV    ±170° Pan, -30 to 90° Tilt Range    PoE Support    Embedded Audio & 3.5mm Stereo Analog In    MJPEG/H.264/H.265/NDI/NDI|HX Streaming

PTZ camera with up to 1080p60 output and 20x optical zoom

Simultaneous NDI/IP, 3G-SDI, and HDMI video streaming via LAN

Wide 3.3 to 54.7° field of view

• Accurate, smooth, and silent pan and tilt moves
• ±170° panning, -30/+90° tilting

Supports PoE (Power-over-Ethernet)

• Advanced 2D/3D noise reduction
• High signal-to-noise ratio

• Up to 255 position presets using WEBSERVER software
• Up to 10 presets using the remote control

Related Questions and Answers

Q: 1. What tripod head quick disconnect systems work best with g-20x and the Peak Design Tripod?

A: If you want to quickly connect/disconnect the Sirui head from the Peak tripod, you could use this QR plate on the bottom of the Sirui head: https://bhpho.to/48kZH9Q

Q: 2. Is this ball head compatible with a Gitzo GT2542T Series 2 Traveler Tripod?

A: Both Gitzo and Sirui heads and tripods use a 1/4-20 thread screw mount so I would say the answer is Yes .

Q: 3. Is the plate on the g-10kx compatible with the Sirui E-20 ball head which is on the et-2004 tripod?

A: All Sirui plates for the ball heads are aArca compatible and are all interchangeable

Q: 4. Hi:What is the difference between the Sirui G20X and G20KX?Thanks

A: The Sirui G20X and G20KX are the same ball head.

Q: 5. What is the difference between the Sirui G-20X Ball Head and the Sirui E-20 Ball Head?

A: The Sirui G-20X Ball Head supports 44 lb (20 kg). The Sirui E-20 Ball Head with TY-50E Plate is a smaller head that supports 26.5 lb (12 kg).

Q: 6. I have an SR-3004 tripod will this fit and I have Acra Swiss L bracket for my Nikon will this work as well?

A: Yes, the Sirui G-20X Ball Head is compatible on the Sirui SR-3004 SR Series Tripod.

Q: 7. Can I use this head on Sirui P-424SR Monopod Carbon Fiber?

A: Yes, the K-20X Ball Head will work on a P-424SR Monopod.

Q: 8. Will a sirui TYC10 quick release plate work with the sirui 20x ball head?

A: Yes. I have the TY-C10 on my camera for use with the 20X ball head.

Q: 9. Is the plate that attaches to the camera made out of plastic or metal?

A: The quick release plate included with the Sirui G-20X Ball Head is metal.

Q: 10. Will this ball head fit the Induro CT213?

A: I thik yes, its standard mount