You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Odyssey Industrial Board Case For 12" Dj Mixer And Two Pioneer Cdj-3000 (all Black)

Odyssey Industrial Board Case For 12" Dj Mixer And Two Pioneer Cdj-3000 (all Black)
  • Product Code: ga211072
  • Availability: In Stock

$1,049.85 $1,406.80

Looking for a case to protect and transport your 12" DJ mixer and two CDJ-3000 media players? Check out the all-black Odyssey Innovative Designs Industrial Board Case, a professional carrying case that can accommodate most 12" DJ mixers such as the Pioneer DJM-900NX2 and two CDJ-3000 media players or similar sized equipment.

The case is constructed from laminated hexagon industrial board with dense foam lining and features heavy-duty ball corners, built-in corner wheels, recessed handles and latches, and removable front-access V-cut panels for easy access. This case is equipped with plenty of ventilation pits and cable-access ports to keep your gear operating with a clean appearance.

All-Black Hardware    Fits Most 12" DJ Mixers    Holds Two CDJ-3000 Media Palyers    Hexagon Industrial Board Laminate    Convenient Removable Front Panels    Removable Stackable Lid    Butterfly Latches    Recessed, Spring-Loaded Handles    Steel Corners and Aluminum Edging    Low-Profile Corner Wheels

Key Specs
ColorBlack
Carry/Transport OptionsWheels (Recessed), Handle
  • Number of Wheels: 2
Type of ClosureLatch
DimensionsExterior
44.5 x 23 x 9.8" / 113 x 58.4 x 24.9 cm
Interior
15.8 x 13.5" / 40.1 x 34.3 cm
Accessory Pocket
16.8 x 12.8" / 42.7 x 32.5 cm (Each)
Weight45 lb / 20.4 kg
Parameters
Carry/Transport OptionsWheels (Recessed), Handle
  • Number of Wheels: 2
Type of ClosureLatch
Removable PanelsFront
General
MaterialsExterior: Plastic, Plywood
DimensionsExterior
44.5 x 23 x 9.8" / 113 x 58.4 x 24.9 cm
Interior
15.8 x 13.5" / 40.1 x 34.3 cm
Accessory Pocket
16.8 x 12.8" / 42.7 x 32.5 cm (Each)
Weight45 lb / 20.4 kg
Packaging Info
Package Weight50 lb
Box Dimensions (LxWxH)45 x 23.5 x 10.88"

  • All-black hardware with hexagon industrial board
  • Foam-lined interior
  • Foam-lined lid
  • Removable front-access panels
  • Heavy-duty ball corners
  • Heavy-duty recessed handle and latches
  • Fits most 12" DJ mixers and two CDJ-3000 media players
  • Corner wheels
  • Rubber feet
  • Limited lifetime warranty

 

Related Questions and Answers

Q: 1. The audio recorded on each track is Raw audio (pre faders and or EFX) or is recorded after process? Thanks

A: The recording is pre-fader and pre-effects. It can also be pre-compressor, there is a setting for that. So yes, it is RAW . The other person who answered is wrong.

Q: 2. Is a warranty included with this?

A: Yes, this product has a 1-year limited warranty from the manufacturer.

Q: 3. Do the Magnus 3000 and 4000 use the same quick release plate?

A: The quick release plates are different between the two.

Q: 4. will this work with an ipad?

A: The Magnus VT-3000 Tripod System with Fluid Head is compatible with an iPad when using an appropriate tripod adapter such as the Glide Gear Tablet Mount Adapter linked below. https://bhpho.to/3txcWRB

Q: 5. Can you store the SD cards in their supplied jewel case?

A: You can fit SD cards into this case.

Q: 6. How long do you think this unit will last with moderate use? I read a review stating 1-2 years (and resulting in a leaky ball head and poor legs), but wanted to hear what some other people had to say.

A: I've had mine for about a year and have punished it severely. So far, so good. Check back in a year and I'll tell you if I had problems.

Q: 7. Can the inserts be purchased separately ?

A: I'm sorry, no.

Q: 8. is the polycarbonate resin archival qualtity?

A: This is an excellent card case holder - memory cards are very safe, secure, and protected from environmental elements.

Q: 9. Can you pad the master output signal down to mic level?

A: Yes, you can pad the master output signal from the Zoom LiveTrak L-12 Digital Mixer & Multitrack Recorder by using an attenuator like the Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel (B&H # HOATT448) and setting the attenuation level for -30 or -40 dB to reduce the line level signal to mic level. The ATT-448 can be used on each of the XLR outputs with XLR cables.

Q: 10. If I just have the standard size memory card, can I use all the slots for that one SD size?

A: Yes. All slots are compatible with two different sizes. The bigger slots in this case for the standard SD card.

03/09/2024

This case does the job. The cards don't fall out. It opens easily.

Over the years I have tried several different SD card holders. The hard cases all have areas for the cards. Different materials have different properties when it comes to holding the cards in place. The inside of this one is made of foam with cutouts that are a little smaller than the cards. Putting the cards in the first time I needed to make sure that the foam surrounded all sides of the card. Once done the cards stayed in place. It's easy to get the cards out because there is a little notch where I can insert my fingertip. My only concern is whether the foam will hold up well over time. Only time will tell.

I have another case where the inside is made of rubber. I was constantly finding cards falling out when I would open the case. Not a good thing. I had to hold the case level all the time because otherwise there would be a card or two on the ground.

5
27/08/2024

Easy to view your cards and keep them safe and organized.

5
03/08/2024

Getting into the camera hobby/professional photography, one of the biggest accessories that I have been noticing is a memory card protector for your memory cards. Whether it be a plastic bag, original single plastic case or this wonderful pelican case. As a photographer, your most precious piece of gear to protect are your memory cards. This product does not disappoint especially carrying the pelican brand. Holds 12 memory cards perfectly, protects them from the elements, and if you drop the case, you will won't gasp for air the moment it hits the floor. If you are just getting into photography and are looking for accessories for your kit, this should be the first thing you should be buying. Don't worry that you don't have enough memory cards to begin with, you will be collecting memory cards the more you are shooting. Just buy this product and never look back!

5
26/07/2024

This case is great yo transport or store your SD cards.
Holds 12 SD, 6 mimiSD, and 6microSD cards.
Nice case. Highly recommended

5
21/07/2024

Hard Case that can organize AND protect your SD & Micro SD cards.

5
16/06/2024

It works great. It is the second one I have purchased for my SD cards. With my photography, I am around water often and I like the fact these cases are water sealed.

5
08/06/2024

Best Brand out there, this case is no exception

5
01/06/2024

Perfect solution for me. 12 SD cards, plus 6 microSD and now 6 CF Express slots. Hardy case with rubber gasket seal.

5
01/05/2024

good protection

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Moment Magsafe Case For Iphone 14 (black)

$120.00 $189.60

Nomatic Tech Case

$299.97 $395.96

Skb Tom Case (12 X 14", Black)

$509.97 $678.26

Skb Tom Case (12 X 12", Black)

$509.97 $617.06

Products You May Like

Samsung M70b 32" 16:9 4k Smart Monitor (white)

$1,199.97 $1,847.95

Avantone Pro Atom Dynamic Tom Microphone

$357.00 $564.06

Cambo Pcs Heavy-duty Controlled Geared Head

$5,235.00 $6,700.80

Nisi 49mm Pro Protection Filter

$96.00 $147.84