The Focal Alpha-65 Evo Monitor is all about one thing: giving any engineer access to a stellar sound at a relatively wallet-friendly price point. With its bass-reflex rounded cabinet, versatile filtering, clean class-D amplification, and its bevy of connection points, this monitor can suit a wide variety of mixing rooms, giving mixing and post-production engineers a sound they can rely upon.

Between its frequency response of 40 Hz to 22 kHz, the monitor is neutral and accurate. You can drive it with unbalanced or balanced audio and adjust the sensitivity to match. Mount it against the wall, or on the wall itself for multichannel immersive audio formats. An IEC power cable is included, as is a protective grille for the woofer.

Pro-Level 2.1 Studio Monitoring System    2 x Alpha 65 Evo Active 6.5" Speakers    1 x Sub One Active Dual 8" Subwoofer    Slatefiber Cone Woofers    Class-D Amplification    Ported Cabinets    XLR, 1/4" TRS & RCA Inputs on Monitors    Adjustable Bass and Treble on Monitors    Variable Phase & Crossover on Subwoofer    Footswitchable Mute on Subwoofer

Stocked with Focal's exclusive, French-manufactured Slatefiber woofer, the Focal 65 EVO provides an excellent presentation of dynamic range. You'll also notice that the speaker is quite balanced: you'll get the same sonic picture throughout your monitoring environment, not just in the sweetspot; and, the monitors have been engineered to give you the same frequency balance at any loudness.

This monitor is built to be used in a variety of ways. Mount it on a stand, in a traditional nearfield setup, or use the built-in insert to mount the speaker to a wall for immersive formats, such as Dolby Atmos.

Dedicated XLR, 1/4" TRS, and RCA inputs are on hand, so you're covered for pretty much any professional or high-end consumer analog connection.

Adjust the low-midrange or the high end to better suit your environment. You'll note a filter adjustable between 0 and 300 Hz (±6 dB), as well as a treble-centric one selectable between 4.5 and 22 kHz (±3 dB).

Related Questions and Answers

Q: 1. Can the battery be replaced?

A: The Pluto Trigger with Shutter Release Cable Kit for Cameras with 2.5mm Sub-Mini Connections has a built-in rechargeable lithium-ion battery. The battery is not user-replaceable. You would have to return the unit to the manufacturer to replace the battery in case of battery failure.

Q: 2. Will this adapter charge the battery in the camera (A77 & A77M2)?

A: The AC-PW10AM will not charge the battery, but rather provide continuous power to the camera. If you are looking for a battery charger, for the A77, check out the Watson Compact AC/DC Charger for L & M Series Batteries: http://bhpho.to/1nBNLSl

Q: 3. Will the Pluto trigger with a Pentax K3, III?

A: Yes. Will work with the following Pentax models Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D

Q: 4. Could this be used to trigger a camera based on the flash from a second camera?

A: The MK Controls Lightning Bug Plus & Vello Cable Kit for Panasonic Sub-Mini Cameras can trigger a camera from another camera's flash.

Q: 5. Will this work for the canon r7?

A: Yes, the Pluto Trigger with Shutter Release Cable Kit for Cameras with 2.5mm Sub-Mini Connections is compatible with the Canon R7 mirrorless camera.

Q: 6. Can this power adapter work with the Sony alpha a7 iv?

A: The Sony AC-PW10AM AC Adapter Kit is for Sony DSLR cameras--it is not compatible with mirrorless cameras like the A7 IV. This kit is compatible with the A7 IV: https://www.bhphotovideo.com/c/product/1660613-REG/ikan_str_pwr_ac_fz100_stratus_power_systems.html

Q: 7. Is this kit compatible with the Shinobi 2 (5 inch latest model 5 inch Shinobi monitor)?

A: The Atomos 5" Accessory Kit for Select Shinobi and Ninja Monitors (Version II) is not compatible with the Shinobi II.

Q: 8. does this work with the sony zve 10

A: No, the Sony AC-PW10AM AC Adapter Kit for Select Sony Alpha SLR Digital Cameras is not compatible in the Sony Sony ZV-E10 Mirrorless Camera. The Sony AC Adapter for Select Sony Cameras, BH #SOACPW20 • MFR #ACPW20 is compatible, https://bhpho.to/3uukllH .

Q: 9. Looking for the trigger with cable Pluto calls E3 for use with Canon 80D and Fuji X T2????

A: The Vello 2.5mm Remote Shutter Release Cable for Cameras with 2.5mm Sub-Mini Connections, B&H # VERCCC125, would be the correct cable for connecting the Pluto Trigger to both the Canon EOS 80D DSLR camera and the Fujifilm X-T2 Mirrorless Digital Camera.

Q: 10. Which drop down selections equate to the E3 and S2 on the manufacturer’s website? I need to order for a Canon 80D and Sony A7RII. Thanks

A: The Canon EOS 80D DSLR Camera uses the 2.5mm E3 sub-miniphone remote connection terminal. The Sony Alpha a7R II Mirrorless Digital Camera uses the USB 2.0 Micro-B Multi-Interface remote terminal. As such, the Pluto Trigger with Shutter Release Cable Kit for Cameras with 2.5mm Sub-Mini Connections, B&H # PLTRIGGERRCC, would be compatible for use with the Canon EOS 80D DSLR camera, while the Pluto Trigger with Shutter Release Cable Kit for Select Sony Cameras with Multi-Terminal, B&H # PLTRIGGERRCS, would be compatible for use with the Sony Alpha a7R II Mirrorless Digital Camera.