The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is cocoa and comes with a 2mm diameter Duramax cable. It terminates to a 1/8" (3.5mm) Mini connector for use with Azden wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    1/8" (3.5mm) Mini Connector    Interchangeable Frequency Response Caps    Optimized for General Speaking

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a high sensitivity that is ideal for general speaking applications

Related Questions and Answers

Q: 1. Does this battery work with a Marshall V-R70P-HDA?

A: That monitor uses V-Mount batteries. It will work if you have an adaptor from gold mount to v-mount.

Q: 2. Can a AA battery be put inside the Rode NTG4?

A: The NTG4 (no +) is only phantom powered. In theory the mic could be powered via a AA battery operated source like a Tascam or Zoom recorder for instance but the mic does NOT take batteries whatsoever. I own an NTG4+ and it is my favorite mic. It is super versatile and the rechargeable battery inside lasts forever.

Q: 3. Is there an IDX battery available with a higher maximum load? More than 14amps? We want to power an Aputure 600d.

A: When powering the Aputure 600d, there is a requirement of using a 26 volt battery. IDX doesn't make a 26V option, however you can use the Nanlite 14.8V / 26V V-Mount Battery Adapter (NAMP150BA ) on a standard 14.8V battery or go with an option like the Fxlion BP-7S270 26V 270Wh Lithium-Ion Battery (V-Mount) (FXBP7S270 ) in powering the light.

Q: 4. Does this have split screen? Two SDI ?

A: No, there is no split-screen option on the OSEE 21.5" High-Bright Field Monitor with Battery Plate.

Q: 5. Do you also sell the gimbal bracket, and the vlock plate?

A: The Lilliput HT10S 10.1" High-Bright 1500 cd/m² On-Camera Touchscreen Monitor battery plates are available at B&H. Please contact Lilliput for the the stand.

Q: 6. i have this batteries, suddenly they wont work with anything (cameras, plates, d-tap), but they do charge, any ideas how to fix this?

A: Yes, Please contact our liv-chat team for support.

Q: 7. Can this be charged from a MacBook Pro USB-C charger?

A: You cannot charge the IDX System Technology DUO-C150P 145Wh High-Load Li-Ion V-Mount Battery from a USB-C charger. There is not enough power. Use a proper charger like this.IDX System Technology D-Tap Advanced Port Battery Charger BH #IDVLDT1 • MFR #VL-DT1

Q: 8. Would this be a good battery to power the Aputure LS300x?

A: Yes, the IDX System Technology DUO-C198P 193Wh High-Load Li-Ion V-Mount Battery would be a perfect fit for the Aputure LS300x (V-Mount) Bi-Color LED Monolight.

Q: 9. Can it be plugged in zoom H1?

A: Yes you will need a xlr cable to do that.

Q: 10. How can this microphone claim so much greater directionality (down 14 dB at 60 degrees off-axis) than other shotgun microphones of similar physical length. Is it a typo?

A: The physical length alone does not determine directinality. It is the overal design and engineering that achieves this specification. Ful Specification per RODE: NTG1 SPECIFICATIONS Acoustic Principle Line Gradient Active Electronics JFET impedance convertor with bipolar output buffer Capsule 0.50" Polar Pattern Supercardioid Address Type End Frequency Range 20Hz - 20kHz Output Impedance 50Ω Maximum SPL 139dBSPL Maximum Output Level 6.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 18dBA Power Options +24V phantom power+48V phantom power Weight 105.00g Dimensions 219.00mmH x 22.00mmW x 22.00mmD Output XLR Output https://cdn1.rode.com/ntg1_datasheet.pdf Warranty 1 year with free extension to 10 years following registration RØDE USA: PO Box 91028, Long Beach CA 90809-1028 Ph: +1 562 364 7400 Fax: +1 888 412 4664