The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is cocoa and comes with a 2mm diameter Duramax cable. It terminates to a 4-pin Hirose connector for use with specific* Audio-Technica wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    4-pin Hirose Connector    Interchangeable Frequency Response Caps    Optimized for General Speaking

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a high sensitivity that is ideal for general speaking applications

Related Questions and Answers

Q: 1. Can the device clock be synchronized with the clock from a computer?

A: No. This will not accept an external sync or clock source.

Q: 2. Does it have gain control? The DR-07 has it, but I can't find it in the DR-07X.

A: To adjust the recording level (mic gain) for the TASCAM DR-07X, you would use the fast-forward and rewind buttons. Instructions can be found on page 9 of the manual here: https://bhpho.to/3UKZSaw

Q: 3. I have 1 sdi camera that connects this capture card https://a href= http://www.bhphotovideo.com/c/product/766050-REG/Blackmagic_Design_BDLKULSASDI_UltraStudio_SDI.html target= _blank www.bhphotovideo.com/c/product/766050-REG/Blackmagic_Design_BDLKULSASDI_UltraStudio_SDI.html/aHow would I connect audio from my mixer board to this device and then into capture card ?

A: Connect your SDI camera to the input to the Mini Converter. Connect your audio console analog audio to the audio inputs to the Mini Converter. The output of the mini converter connects to the Ultra Studio

Q: 4. I can make convert the video by using Blackmagic Design SDI to Audio Mini Converter but there is no sound( I mean I cant hear the voice on my tv what shall I do ?

A: Make sure you've got your dip settings correct for the type of audio, aes/ebu or analog and you're decoding the correct channels your audio is on. You should play around with your dip switch settings and try different configurations.

Q: 5. Can you use a splitter to listen on headphones while recording from the DR-07X to an external device such as a Canon SL2?

A: Yes you can. If you are losing too much level you can get a small headphone amp.

Q: 6. If I use two separate audio inputs can I separate them to right and left channels?

A: Yes, you can separate them.

Q: 7. Compatible with Sony PXW-FS5M2K?

A: No it is not compatible.

Q: 8. Does this item suffer from interference when near other electronics such as phones?

A: Yes, it is possible that the TASCAM DR-07X Portable Audio Recorder could be affected by RF when placed in close proximity to devices like smartphones, routers, computers, and other appliances that can generate RF. It is always best to avoid placing the recorder near devices like these and to do test recordings as well as monitor the audio while recording to ensure that noise is not being picked along with the audio signal.

Q: 9. Do you also sell the gimbal bracket, and the vlock plate?

A: The Lilliput HT10S 10.1" High-Bright 1500 cd/m² On-Camera Touchscreen Monitor battery plates are available at B&H. Please contact Lilliput for the the stand.

Q: 10. Does this battery work with a Marshall V-R70P-HDA?

A: That monitor uses V-Mount batteries. It will work if you have an adaptor from gold mount to v-mount.