Celestron Regal Premium Tripod
- Product Code: ga21127
-
The Regal Premium Tripod from Celestron features four-section aluminum legs with three angle adjustments and a two-way pan fluid head with one handle and a 1/4"-20 quick release adapter.
The two-way fluid pan head has a single handle and two tension knobs for easy movement, pan-and-tilt adjustment, and securing the position. A quick release plate has a standard 1/4"-20 adapter for attaching your spotting scope, binocular, camera, or a small telescope.
The aluminum legs are adjustable in length and have three angle settings. Each leg has four sections and can be shortened or lengthened with the flip of a simple lever lock. Two of the legs have padded handles for a comfortable grip in any weather and protection for your shoulder during carrying. To secure your tripod in one place, there are interchangeable rubber or spiked feet.
With the center column fully extended, the maximum height is nearly 69". With the column down, the height is 59". The bottom of the column holds a retractable ballast hook that can hold additional weight to add stability. When it is not needed, you can retract it into the center column and keep it out of the way.
8.8 lb Maximum Load Height Range: 18.3 to 68.8" Two-Way Fluid Pan Head Quick Release Plate with 1/4"-20 Thread Padded Handles on Two Legs Legs with Three Angle Settings Interchangeable Rubber / Spiked Feet Retractable Balance Hook Two Bubble Levels
Key Specs | |
---|---|
Camera Mounting Screw | 1/4"-20 Male |
Quick Release Plate Type | Proprietary |
Head Type | Fluid Head |
Load Capacity | 8.8 lb / 4 kg |
Maximum Working Height | Not Specified by Manufacturer |
Minimum Working Height | 18.3" / 0.5 m |
Closed Length | 24.8" / 63.0 cm |
Materials | Aluminum Alloy |
Weight | 6 lb / 2.7 kg |
Leg Lock Type | Flip Lock |
Leg Sections | 4 |
Foot Features | Spiked |
Camera Attachment | |
Camera Mounting Screw | 1/4"-20 Male |
Quick Release Plate Type | Proprietary |
Head | |
Head Type | Fluid Head |
Bubble Level | 2 |
General | |
Load Capacity | 8.8 lb / 4 kg |
Maximum Working Height | Not Specified by Manufacturer |
Max Height without Center Column | 59" / 150 cm |
Minimum Working Height | 18.3" / 0.5 m |
Closed Length | 24.8" / 63.0 cm |
Materials | Aluminum Alloy |
Weight | 6 lb / 2.7 kg |
Legs | |
Leg Lock Type | Flip Lock |
Leg Positions | 3 Positions |
Independent Leg Spread | Yes |
Leg Sections | 4 |
Bubble Level | Yes |
Foot Features | Spiked |
Detachable Monopod | |
Maximum Working Height | 68.8" / 1.75 m |
Leg Sections | 4 |
Monopod Foot Features | Rubber, Spiked |
Packaging Info | |
Package Weight | 7.2 lb |
Box Dimensions (LxWxH) | 28 x 5 x 5" |
- Maximum load is 8.8 lb
- Tripod weight is 6 lb
- Maximum height is 68.8"
- Maximum height with column down is 59"
- Minimum height is 18.3"
- Minimum height when folded is 24.8"
- Two-way fluid Pan Head with single handle
- Quick release plate has 1/4"-20 adapter
- Two bubble levels
- Four aluminum sections with lever flip locks
- Three angle adjustments
- Two legs padded handles
- Interchangeable rubber and spiked feet
Related Questions and Answers
Q: 1. Does the 25x70 ceslestron work with this tripod?
A: Yes the Celestron SkyMaster 25x70 Binocular would fit on this tripod with the Tripod Adapter that came in the box with the Binoculars.
Q: 2. Can this scope be used with a Sony A6000. Is a T adapter available?
A: That is not a problem. All you would need is the Vello T-Mount Lens to Sony E-Mount Camera Adapter. Website link: https://bhpho.to/2crVPMn
Q: 3. A common criticism of this scope is that the mounting foot is too far forward. It appears that if the foot/support ring were turned around, the overall balance would be better. Can this be done by the user?
A: Unfortunately, the foot/support ring cannot be turned around.
Q: 4. If used with Nikon D810 (FF) and appropriate adapter, what would be the effective focal length at the widest (20x) setting? Thanks.
A: Like using a 1,000mm lense at 20X
Q: 5. Do you sell a solar filter that fits this spotting scope (for viewing the solar eclipse)?
A: Unfortunately we do not.
Q: 6. Which adapter would you recommend for the Regal M2 80ED to use with Nikon D810? Thanks
A: I would recommend the Novagrade Digiscoping Adapter for Nikon DSLR Cameras BH #NOUA00NI01 • MFR #UA-00NI-01 https://www.bhphotovideo.com/c/product/1007579-REG/novagrade_ua_00ni_01_nikon_camera_universal_adapter.html
Q: 7. Will this support Celestron 25x100 Binoculars without wobbling?
A: The Regal Premium Tripod will support the SkyMaster 25x100 binocular. However, the surface you set the tripod on, such as grass, can help to minimize vibrations or wobbling compared to other surfaces.
Q: 8. Would these be suitable or good for boating viewing over water?
A: So these would somewhat work on Land. However on a Boat might not be the choice since there will be a lot of movement. I would recommend going with a 7X50 Binocular for the Boat. The Nikon 7x50 Action Extreme ATB Binoculars would be a great option. Link: https://bhpho.to/3m0rzas
Q: 9. Would these be good for boaters & viewing over the water?
A: Yes they are Nitrogen Filled, Water & Fogproof
Q: 10. Do these come with a harness?
A: In the Box: Celestron 8x42 Regal ED Binocular Lens Cloth Neck Strap Carrying Harness Hard Carrying Case with Strap Ocular Rainguard 2 x Objective Lens Cap Limited Lifetime Warranty
Top Bestselling Products
Mount-it! Single Motor Electric Standing Desk Base (black)
$599.97 $827.96
Mount-it! Single Motor Electric Standing Desk Base (white)
$599.97 $857.96
Peerless-av 3-5' Adjustable Extension Column (black)
$329.85 $458.49
Peerless-av 8-10' Adjustable Extension Column (white)
$457.50 $603.90
Eureka Electric Height-adjustable Computer Desk
$1,079.97 $1,511.96
Mount-it! Electric Sit-stand Desk With 55" Tabletop (white Frame, Oak Tabletop)
$1,379.97 $2,111.35
Quiklok Z-70 Adjustable Single-tier Z-style Keyboard Stand
$869.97 $1,287.56
Cinegears Single-axis Standard Motor
$3,465.00 $5,024.25
Negative Supply Basic Riser Mk3
$897.00 $1,112.28
Mount-it! Electric Mobile Standing Desk
$869.97 $1,331.05
Cardellini Tri-hat With Mitchell Mount
$3,174.75 $4,127.18
Flexispot Height-adjustable Desk
$923.25 $1,264.85
Atdec Pos Height Adjustable Desk Display Mount
$506.97 $760.46
Mcs Brushed Aluminum Frame (gunmetal, 16 X 20")
$137.85 $190.23
Products You May Like
Listen Technologies Advanced Intelligent Dsp Rf Receiver Package 1 (72 Mhz)
$1,077.00 $1,637.04
Flm Cp10-tabletop Tripod And Cb-24 E Ball Head Kit
$369.00 $560.88
Pyle Pro Pdicbt67 6.5" Bluetooth Ceiling/wall Speakers (pair)
$255.27 $372.69
Litepanels Gemini 2x1 Domed Diffuser
$470.25 $743.00
Dji Intelligent Flight Battery For Mavic Quadcopter
$285.00 $342.00
Dry Lam Ep210 Electric 2-hole Punch
$430.98 $564.58
Tiffen 95mm Coarse Thread 3 Antique Suede Solid Color Filter
$1,424.85 $1,809.56
Smdv Mount Adapter For Broncolor 80.5 Flash Heads
$87.00 $133.98
Linhof Quickfix Ii Large Quick Release Adapter With Plate & Bubble Levels
$1,340.97 $1,810.31
Aquatica Led Flash Trigger (replacement) For Ad500 Housing
$717.00 $1,089.84
Horseman 55mm F/4.5 Apo-sironar Digital Lens Unit For Sw-d Ii Pro
$12,753.00 $18,491.85
Tiffen 95mm Coarse Thread Fog 1/2 Filter
$952.50 $1,409.70