The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is tan and comes with a 1mm diameter cable. It terminates to a Switchcraft 851 connector for use with Lectrosonics wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    1mm Diameter Cable    Switchcraft 851 Connector    Interchangeable Frequency Response Caps    Optimized for General Speaking

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 1mm diameter cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a high sensitivity that is ideal for general speaking applications

Related Questions and Answers

Q: 1. is it includes these microphone wind shild

A: It actually comes with the foam windshield. It will the do the job inside, but it's not very effective outside. I recommend buying a separate windshield.

Q: 2. When mounted on the SONY RX10 via the shoe this microphone disables the manual audio levels. Am I therefore correct in assuming that the RX10 is now recording with auto levels? But when I plug-in the included connecting cable in addition manual levels are once again usable. So when mounted to the shoe, with connecting cable plugged-in is the only way to use manual audio levels with the RX10?SONY offer no explanation as to what's actually happening here!

A: The way the mic works is correct and the only controls if using via the shoe are just what are on the mic itself. To get the other controls from the camera it needs to be attached via the mic jack.

Q: 3. Will this work on the new Black Magic Pocket Cinema Camera 4K?

A: Yes it does work all you need is this adapter in the link bellow https://www.bhphotovideo.com/c/product/1537929-REG/kondor_blue_kb_mxlr_16_mini_xlr_male_to.html

Q: 4. Can this be charged from a MacBook Pro USB-C charger?

A: You cannot charge the IDX System Technology DUO-C150P 145Wh High-Load Li-Ion V-Mount Battery from a USB-C charger. There is not enough power. Use a proper charger like this.IDX System Technology D-Tap Advanced Port Battery Charger BH #IDVLDT1 • MFR #VL-DT1

Q: 5. Can I use with Android Smartphone (OnePlus 5) and if yes, do I need any special cord for that?

A: No this unit will only work on Sony cameras with a multi interface shoe.

Q: 6. Can it be plugged in zoom H1?

A: Yes you will need a xlr cable to do that.

Q: 7. can I use this with the atem min extreme iso pro hdmi version?

A: The Blackmagic Design ATEM Microphone Converter is only designed to work with the new ATEM Television Studio switchers over the MADI in/out port, which the ATEM Mini Extreme ISO HDMI switcher does not have.

Q: 8. What is the country of origin for this product?

A: Australia

Q: 9. How far from the subject this mic can record with quality? Is it good for advertising production?

A: Lots of variables here, but generally you should be within a couple of feet of the sound source - less if it is a noisy environment. This is more an aspect of proper location sound technique in general, rather than the quality of this particular mic. This mic is capable of very good quality sound, but even the most expensive mic will sound terrible if it is 10 ft from the subject.

Q: 10. Will this work with a Sony RX100VII?

A: The Sony ECM-XYST1M is not directly compatible with the Sony RX100VII.